430 lines
8.2 KiB
Plaintext
430 lines
8.2 KiB
Plaintext
|
/*
|
||
|
|
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
|
||
|
|
*
|
||
|
|
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
#include "rk3288-evb.dtsi"
|
||
|
|
#include "rk3288-android.dtsi"
|
||
|
|
#include <dt-bindings/sensor-dev.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
panel {
|
||
|
|
compatible = "simple-panel";
|
||
|
|
backlight = <&backlight>;
|
||
|
|
enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||
|
|
prepare-delay-ms = <120>;
|
||
|
|
|
||
|
|
display-timings {
|
||
|
|
native-mode = <&timing0>;
|
||
|
|
|
||
|
|
timing0: timing0 {
|
||
|
|
clock-frequency = <200000000>;
|
||
|
|
hactive = <1536>;
|
||
|
|
vactive = <2048>;
|
||
|
|
hfront-porch = <12>;
|
||
|
|
hsync-len = <16>;
|
||
|
|
hback-porch = <48>;
|
||
|
|
vfront-porch = <8>;
|
||
|
|
vsync-len = <4>;
|
||
|
|
vback-porch = <8>;
|
||
|
|
hsync-active = <0>;
|
||
|
|
vsync-active = <0>;
|
||
|
|
de-active = <0>;
|
||
|
|
pixelclk-active = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port {
|
||
|
|
panel_in_edp: endpoint {
|
||
|
|
remote-endpoint = <&edp_out_panel>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sdio_pwrseq: sdio-pwrseq {
|
||
|
|
compatible = "mmc-pwrseq-simple";
|
||
|
|
clocks = <&rk808 1>;
|
||
|
|
clock-names = "ext_clock";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&wifi_enable_h>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* On the module itself this is one of these (depending
|
||
|
|
* on the actual card populated):
|
||
|
|
* - SDIO_RESET_L_WL_REG_ON
|
||
|
|
* - PDN (power down when low)
|
||
|
|
*/
|
||
|
|
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
test-power {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
wireless-bluetooth {
|
||
|
|
clocks = <&rk808 1>;
|
||
|
|
clock-names = "ext_clock";
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ sdmmc-regulator;
|
||
|
|
|
||
|
|
vdd_log: vdd-logic {
|
||
|
|
compatible = "pwm-regulator";
|
||
|
|
rockchip,pwm_id = <1>;
|
||
|
|
rockchip,pwm_voltage = <1100000>;
|
||
|
|
pwms = <&pwm1 0 25000 1>;
|
||
|
|
regulator-name = "vcc_log";
|
||
|
|
regulator-min-microvolt = <860000>;
|
||
|
|
regulator-max-microvolt = <1360000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
xin32k: xin32k {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
clock-frequency = <32768>;
|
||
|
|
clock-output-names = "xin32k";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&backlight {
|
||
|
|
pwms = <&pwm0 0 1000000 0>;
|
||
|
|
enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu0 {
|
||
|
|
cpu-supply = <&vdd_cpu>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cif_isp0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&dfi {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&dmc {
|
||
|
|
center-supply = <&vdd_log>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&edp {
|
||
|
|
force-hpd;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
ports {
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
edp_out_panel: endpoint {
|
||
|
|
remote-endpoint = <&panel_in_edp>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&edp_in_vopb {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&edp_in_vopl {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&route_edp {
|
||
|
|
connect = <&vopl_out_edp>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpu {
|
||
|
|
status = "okay";
|
||
|
|
mali-supply = <&vdd_gpu>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gmac {
|
||
|
|
max-speed = <1000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&hdmi_analog_sound {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sound {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c0 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
rk808: pmic@1b {
|
||
|
|
compatible = "rockchip,rk808";
|
||
|
|
reg = <0x1b>;
|
||
|
|
interrupt-parent = <&gpio0>;
|
||
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pmic_int &global_pwroff>;
|
||
|
|
rockchip,system-power-controller;
|
||
|
|
wakeup-source;
|
||
|
|
#clock-cells = <1>;
|
||
|
|
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||
|
|
|
||
|
|
vcc1-supply = <&vcc_sys>;
|
||
|
|
vcc2-supply = <&vcc_sys>;
|
||
|
|
vcc3-supply = <&vcc_sys>;
|
||
|
|
vcc4-supply = <&vcc_sys>;
|
||
|
|
vcc6-supply = <&vcc_sys>;
|
||
|
|
vcc8-supply = <&vcc_io>;
|
||
|
|
vcc9-supply = <&vcc_io>;
|
||
|
|
vcc12-supply = <&vcc_io>;
|
||
|
|
vddio-supply = <&vcc_io>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
vdd_cpu: DCDC_REG1 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <750000>;
|
||
|
|
regulator-max-microvolt = <1400000>;
|
||
|
|
regulator-name = "vdd_arm";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_gpu: DCDC_REG2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <850000>;
|
||
|
|
regulator-max-microvolt = <1250000>;
|
||
|
|
regulator-name = "vdd_gpu";
|
||
|
|
regulator-ramp-delay = <6000>;
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_ddr: DCDC_REG3 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-name = "vcc_ddr";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_io: DCDC_REG4 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "vcc_io";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_tp: LDO_REG1 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "vcc_tp";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcca_codec: LDO_REG2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "vcca_codec";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_10: LDO_REG3 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
regulator-name = "vdd_10";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <1000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_wl: LDO_REG4 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-name = "vcc_wl";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vccio_sd: LDO_REG5 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "vccio_sd";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd10_lcd: LDO_REG6 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
regulator-name = "vdd10_lcd";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_18: LDO_REG7 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-name = "vcc_18";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc18_lcd: LDO_REG8 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-name = "vcc18_lcd";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_sd: SWITCH_REG1 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-name = "vcc_sd";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_lcd: SWITCH_REG2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-name = "vcc_lcd";
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
mpu6050_acc: mpu-acc@68 {
|
||
|
|
status = "okay";
|
||
|
|
compatible = "mpu6500_acc";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&mpu6050_irq_gpio>;
|
||
|
|
reg = <0x68>;
|
||
|
|
irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
irq_enable = <0>;
|
||
|
|
poll_delay_ms = <30>;
|
||
|
|
type = <SENSOR_TYPE_ACCEL>;
|
||
|
|
layout = <8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mpu6050_gyro: mpu-gyro@68 {
|
||
|
|
status = "okay";
|
||
|
|
compatible = "mpu6500_gyro";
|
||
|
|
reg = <0x68>;
|
||
|
|
irq_enable = <0>;
|
||
|
|
poll_delay_ms = <30>;
|
||
|
|
type = <SENSOR_TYPE_GYROSCOPE>;
|
||
|
|
layout = <8>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ak8963_compass: ak8963-compass@0d {
|
||
|
|
status = "okay";
|
||
|
|
compatible = "ak8963";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&ak8963_irq_gpio>;
|
||
|
|
reg = <0x0d>;
|
||
|
|
type = <SENSOR_TYPE_COMPASS>;
|
||
|
|
irq-gpio = <&gpio8 1 IRQ_TYPE_EDGE_RISING>;
|
||
|
|
irq_enable = <0>;
|
||
|
|
poll_delay_ms = <30>;
|
||
|
|
layout = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
&io_domains {
|
||
|
|
status = "okay";
|
||
|
|
audio-supply = <&vcc_io>;
|
||
|
|
bb-supply = <&vcc_io>;
|
||
|
|
dvp-supply = <&vcc_io>;
|
||
|
|
flash0-supply = <&vcc_18>;
|
||
|
|
flash1-supply = <&vcc_io>;
|
||
|
|
gpio30-supply = <&vcc_io>;
|
||
|
|
gpio1830 = <&vcc_io>;
|
||
|
|
lcdc-supply = <&vcc_lcd>;
|
||
|
|
sdcard-supply = <&vccio_sd>;
|
||
|
|
wifi-supply = <&vcc_wl>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&rockchip_suspend {
|
||
|
|
status = "okay";
|
||
|
|
rockchip,pwm-regulator-config = <
|
||
|
|
(0
|
||
|
|
| PWM1_REGULATOR_EN
|
||
|
|
)
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm1 {
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "active";
|
||
|
|
pinctrl-0 = <&pwm1_pin_pull_down>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pinctrl {
|
||
|
|
mpu6050 {
|
||
|
|
mpu6050_irq_gpio: mpu6050-irq-gpio {
|
||
|
|
rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
ak8963 {
|
||
|
|
ak8963_irq_gpio: ak8963-irq-gpio {
|
||
|
|
rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|