* galaxycore,gc2053 MIPI sensor

Required Properties:
- compatible: should be "galaxycore,gc2053"
- clocks: reference to the 24M xvclk input clock.
- clock-names: should be "xvclk".
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
- avdd-supply: Analog voltage supply, 2.8 volts
- dvdd-supply: Digital core voltage supply, 1.2 volts
- reset-gpios: Low active reset gpio
- pwdn-gpios: Low active power-down gpio

Attention:
GC2053 device address 0x37(7bit)

Example:
&i2c1 {
	status = "okay";
	gc2053: gc2053@37 {
		compatible = "galaxycore,gc2053";
		reg = <0x37>;
		clocks = <&cru CLK_MIPICSI_OUT>;
		clock-names = "xvclk";
		power-domains = <&power RV1126_PD_VI>;
		pinctrl-names = "rockchip,camera_default";
		pinctrl-0 = <&mipicsi_clk0>;
		power-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
		pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_LOW>;
		reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
		avdd-supply = <&vcc_avdd>;
		dovdd-supply = <&vcc_dovdd>;
		dvdd-supply = <&vcc_dvdd>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "front";
		rockchip,camera-module-name = "YT-RV1109-2-V1";
		rockchip,camera-module-lens-name = "40IR-2MP-F20";
		port {
			ucam_out0: endpoint {
				remote-endpoint = <&mipi_in_ucam0>;
				data-lanes = <1 2>;
			};
		};
	};
};