// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;
#include "rk3288-evb.dtsi"
#include "rk3288-linux.dtsi"

/ {
	compatible = "rockchip,rk3288-evb-rk808-linux", "rockchip,rk3288";

	adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 1>;
		io-channel-names = "buttons";
		poll-interval = <100>;
		keyup-threshold-microvolt = <1800000>;

		button-up {
			label = "Volume Up";
			linux,code = <KEY_VOLUMEUP>;
			press-threshold-microvolt = <18000>;
		};

		button-down {
			label = "Volume Down";
			linux,code = <KEY_VOLUMEDOWN>;
			press-threshold-microvolt = <300000>;
		};

		menu {
			label = "Menu";
			linux,code = <KEY_MENU>;
			press-threshold-microvolt = <640000>;
		};

		esc {
			label = "Esc";
			linux,code = <KEY_ESC>;
			press-threshold-microvolt = <1000000>;
		};

		home  {
			label = "Home";
			linux,code = <KEY_HOME>;
			press-threshold-microvolt = <1300000>;
		};
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rk808 1>;
		clock-names = "ext_clock";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h>;

		/*
		 * On the module itself this is one of these (depending
		 * on the actual card populated):
		 * - SDIO_RESET_L_WL_REG_ON
		 * - PDN (power down when low)
		 */
		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
	};

	wireless-bluetooth {
		clocks = <&rk808 1>;
		clock-names = "ext_clock";
	};

	/delete-node/ sdmmc-regulator;

	vcc18_dvp: vcc18-dvp {
		compatible = "regulator-fixed";
		regulator-name = "vcc18_dvp";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-always-on;
		vin-supply = <&vcc_io>;
	};

	vdd_log: vdd-logic {
		compatible = "pwm-regulator";
		rockchip,pwm_id = <1>;
		rockchip,pwm_voltage = <1100000>;
		pwms = <&pwm1 0 25000 1>;
		regulator-name = "vcc_log";
		regulator-min-microvolt = <860000>;
		regulator-max-microvolt = <1360000>;
		regulator-always-on;
		regulator-boot-on;
	};

	xin32k: xin32k {
		compatible = "fixed-clock";
		clock-frequency = <32768>;
		clock-output-names = "xin32k";
		#clock-cells = <0>;
	};
};

&backlight {
	enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&bl_en>;
	pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
};

&cpu0 {
	cpu0-supply = <&vdd_cpu>;
};

&dfi {
	status = "okay";
};

&dmc {
	center-supply = <&vdd_log>;
	status = "okay";
};

&edp_in_vopb {
	status = "disabled";
};

&edp_in_vopl {
	status = "okay";
};

&gpu {
	status = "okay";
	mali-supply = <&vdd_gpu>;
};

&hdmi {
	pinctrl-0 = <&hdmi_ddc>, <&hdmi_cec_c0>;
};

&i2c0 {
	clock-frequency = <400000>;

	rk808: pmic@1b {
		compatible = "rockchip,rk808";
		reg = <0x1b>;
		interrupt-parent = <&gpio0>;
		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int &global_pwroff>;
		rockchip,system-power-controller;
		wakeup-source;
		#clock-cells = <1>;
		clock-output-names = "rk808-clkout1", "rk808-clkout2";

		vcc1-supply = <&vcc_sys>;
		vcc2-supply = <&vcc_sys>;
		vcc3-supply = <&vcc_sys>;
		vcc4-supply = <&vcc_sys>;
		vcc6-supply = <&vcc_sys>;
		vcc8-supply = <&vcc_io>;
		vcc9-supply = <&vcc_io>;
		vcc12-supply = <&vcc_io>;
		vddio-supply = <&vcc_io>;

		regulators {
			vdd_cpu: DCDC_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <750000>;
				regulator-max-microvolt = <1400000>;
				regulator-name = "vdd_arm";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_gpu: DCDC_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <1250000>;
				regulator-name = "vdd_gpu";
				regulator-ramp-delay = <6000>;
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_ddr";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vcc_io: DCDC_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_io";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcc_tp: LDO_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_tp";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca_codec: LDO_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcca_codec";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vdd_10: LDO_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-name = "vdd_10";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1000000>;
				};
			};

			vcc_wl: LDO_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_wl";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vccio_sd: LDO_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd10_lcd: LDO_REG6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-name = "vdd10_lcd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_18: LDO_REG7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_18";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vcc18_lcd: LDO_REG8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc18_lcd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_sd: SWITCH_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_sd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_lcd: SWITCH_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_lcd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};
	};

	CW2015@62 {
		compatible = "cw201x";
		reg = <0x62>;
		bat_low_gpio = <&gpio0 7 GPIO_ACTIVE_LOW>;
		dc_det_gpio = <&gpio0 8 GPIO_ACTIVE_LOW>;
		chg_ok_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
		bat_config_info = <0x15 0x42 0x60 0x59 0x52 0x58 0x4D 0x48 0x48 0x44 0x44 0x46 0x49 0x48 0x32
			0x24 0x20 0x17 0x13 0x0F 0x19 0x3E 0x51 0x45 0x08 0x76 0x0B 0x85 0x0E 0x1C 0x2E 0x3E 0x4D 0x52 0x52
			0x57 0x3D 0x1B 0x6A 0x2D 0x25 0x43 0x52 0x87 0x8F 0x91 0x94 0x52 0x82 0x8C 0x92 0x96 0xFF 0x7B 0xBB
			0xCB 0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x46 0xAE>;
		is_dc_charge = <1>;
		is_usb_charge = <0>;
		monitor_sec = <5>;
		virtual_power = <0>;
		divider_res1 = <200>;
		divider_res2 = <200>;
	};
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	mpu6050@68 {
		compatible = "invensense,mpu6050";
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&mpu6050_irq_gpio>;
		reg = <0x68>;
		irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
		mpu-int_config = <0x10>;
		mpu-level_shifter = <0>;
		mpu-orientation = <0 1 0 1 0 0 0 0 1>;
		orientation-x= <0>;
		orientation-y= <1>;
		orientation-z= <0>;
		support-hw-poweroff = <1>;
		mpu-debug = <1>;
	};

	ak8963: compass@d{
		compatible = "mpu_ak8963";
		reg = <0x0d>;
		compass-bus = <0>;
		compass-adapt_num = <0>;
		compass-orientation = <1 0 0 0 1 0 0 0 1>;
		orientation-x= <0>;
		orientation-y= <0>;
		orientation-z= <1>;
		compass-debug = <1>;
		status = "okay";
	};
};

&io_domains {
	status = "okay";
	audio-supply = <&vcc_io>;
	bb-supply = <&vcc_io>;
	dvp-supply = <&vcc18_dvp>;
	flash0-supply = <&vcc_18>;
	flash1-supply = <&vcc_io>;
	gpio30-supply = <&vcc_io>;
	gpio1830 = <&vcc_io>;
	lcdc-supply = <&vcc_lcd>;
	sdcard-supply = <&vccio_sd>;
	wifi-supply = <&vcc_wl>;
};

&i2c3 {
	status = "okay";

	ov13850: ov13850@10 {
		compatible = "ovti,ov13850";
		reg = <0x10>;
		clocks = <&cru SCLK_VIP_OUT>;
		clock-names = "xvclk";
		/* avdd-supply = <>; */
		/* dvdd-supply = <>; */
		/* dovdd-supply = <>; */
		/* reset-gpios = <>; */
		pinctrl-names = "rockchip,camera_default";
		pinctrl-0 = <&isp_mipi>;
		power-gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		reset-gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
		pwdn-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "CMK-CT0116";
		rockchip,camera-module-lens-name = "Largan-50013A1";
		port {
			ov13850_out: endpoint {
				remote-endpoint = <&mipi_in_ucam0>;
				data-lanes = <1 2>;
			};
		};
	};

	gc8034: gc8034@37 {
		compatible = "galaxycore,gc8034";
		status = "okay";
		reg = <0x37>;
		clocks = <&cru SCLK_VIP_OUT>;
		clock-names = "xvclk";
		pinctrl-names = "rockchip,camera_default";
		pinctrl-0 = <&isp_mipi>;
		power-gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpio7 RK_PC5 GPIO_ACTIVE_LOW>;
		pwdn-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "LH-RK-8034-v1.0";
		rockchip,camera-module-lens-name = "CK8401";
		port {
			gc8034_out: endpoint {
				remote-endpoint = <&mipi_in_gc8034>;
				data-lanes = <1 2 3 4>;
			};
		};
	};
};

&isp_mmu {
	status = "okay";
};

&mipi_phy_rx0 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_in_ucam0: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&ov13850_out>;
				data-lanes = <1 2>;
			};
			mipi_in_gc8034: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&gc8034_out>;
				data-lanes = <1 2 3 4>;
			};
		};

		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			dphy_rx_out: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&isp_mipi_in>;
			};
		};
	};
};

&rkisp1 {
	status = "okay";
	port {
		#address-cells = <1>;
		#size-cells = <0>;

		isp_mipi_in: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&dphy_rx_out>;
		};

	};
};

&rga {
	status = "okay";
};

&route_edp {
	status = "okay";
};

&route_hdmi {
	status = "okay";
};

&uart2 {
	status = "disabled";
};

&pwm0 {
	status = "okay";
};

&pwm1 {
	pinctrl-names = "active";
	pinctrl-0 = <&pwm1_pin_pull_down>;
	status = "okay";
};

&pinctrl {
	backlight {
		bl_en: bl-en {
			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	buttons {
		pwrbtn: pwrbtn {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	mpu6050 {
		mpu6050_irq_gpio: mpu6050-irq-gpio {
			rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};