# AP6398SV_NVRAM_V1.2_20210531 # AP6398SV v00 WLBGA reference board, iPA version. # SSID generated using Alberto's boardssid.py script: # ********************SUMMARY******************** # Board Name: AP6398SV_V00 #SSID: 0x086d #macmid: 0x02df # Successfully made SSID entry in sromdefs.tcl. # Successfully made macmid entry in sromdefs.tcl. # Successfully made SSID entry in tblssid.py. # ************************************************* # $ Copyright Broadcom $ # # # <> NVRAMRev=$Rev: 880662 $ sromrev=11 boardrev=0x1213 boardtype=0x08ed boardflags=0x00400201 boardflags2=0xc0800000 boardflags3=0x40002180 #boardnum=57410 macaddr=00:90:4c:12:d0:01 jtag_irw=38 #Regulatory specific ccode=0 regrev=0 # Board specific vendid=0x14e4 devid=0x449d manfid=0x2d0 antswitch=0 pdgain5g=0 pdgain2g=0 aa2g=3 aa5g=3 agbg0=2 agbg1=2 aga0=2 aga1=2 extpagain2g=2 extpagain5g=2 rxgains2gelnagaina0=0 rxgains2gtrisoa0=0 rxgains2gtrelnabypa0=0 rxgains5gelnagaina0=0 rxgains5gtrisoa0=0 rxgains5gtrelnabypa0=0 rxgains5gmelnagaina0=0 rxgains5gmtrisoa0=0 rxgains5gmtrelnabypa0=0 rxgains5ghelnagaina0=0 rxgains5ghtrisoa0=0 rxgains5ghtrelnabypa0=0 rxgains2gelnagaina1=0 rxgains2gtrisoa1=0 rxgains2gtrelnabypa1=0 rxgains5gelnagaina1=0 rxgains5gtrisoa1=0 rxgains5gtrelnabypa1=0 rxgains5gmelnagaina1=0 rxgains5gmtrisoa1=0 rxgains5gmtrelnabypa1=0 rxgains5ghelnagaina1=0 rxgains5ghtrisoa1=0 rxgains5ghtrelnabypa1=0 #RSSI related # 2G rssicorrnorm_c0=4,4 rssicorrnorm_c1=4,4 # 5G rssicorrnorm5g_c0=5,5,5,5,5,5,5,5,5,5,5,5 rssicorrnorm5g_c1=4,4,4,4,4,4,4,4,4,4,4,4 #Two range TSSI tworangetssi2g=0 tworangetssi5g=0 lowpowerrange2g=0 lowpowerrange5g=0 low_adc_rate_en=1 # NOTE :================================================================================ # To run TPC with Two Range TSSI ,set tworangetssi2g = 1 and lowpowerrange2g = 0 # To run TPC with Single Range TSSI, set tworangetssi2g = 0 # To run TPC please READ instructions near pa2ga0 and pa2ga1 as well # To generate PA params for Low Range set tworangetssi2g = 0 and lowpowerrange2g to 1 # To generate PA params for High Range set tworangetssi2g = 1 and lowpowerrange2g to 1 # ====================================================================================== #Related to FW Download. Host may use this nocrc=1 otpimagesize=502 xtalfreq=37400 txchain=3 rxchain=3 cckdigfilttype=2 #bit mask for slice capability bit 0:2G bit 1:5G bandcap=3 #TXBF Related rpcal2g=0 rpcal5gb0=0 rpcal5gb1=0 rpcal5gb2=0 rpcal5gb3=0 #FDSS Related fdss_level_2g=4,4 fdss_interp_en=1 fdss_level_5g=4,4 fdss_level_11ax_2g=3,3 fdss_level_11ax_2g_ch1=3,3 fdss_level_11ax_2g_ch11=3,3 fdss_level_11ax_5g=3,3 #Tempsense Related tempthresh=255 tempoffset=40 rawtempsense=0x1ff phycal_tempdelta=15 temps_period=15 temps_hysteresis=15 #------------- TSSI Related ------------- tssipos2g=1 tssipos5g=1 AvVmid_c0=2,127,4,92,4,91,4,91,4,94 AvVmid_c1=2,127,4,93,4,93,4,95,3,110 # CCK in case of multi mode 2 pa2gccka0=-92,8650,-968 pa2gccka1=-80,9246,-1031 # OFDM in case of multi_mode 2 #pa2ga0=-165,7565,-901 pa2ga0=-65,7961,-840 pa2ga1=-153,6853,-795 pa5ga0=-155,6039,-728,-170,5620,-690,-184,5301,-667,-157,5755,-698 #pa5ga0=-186,5284,-657,-167,5445,-665,-170,5407,-676,-176,5407,-675 #pa5ga1=-143,5954,-705,-136,6243,-722,-100,6496,-727,-89,7190,-798 pa5ga1=-191,5585,-688,-188,5596,-686,-177,5638,-689,-187,5822,-716 # Max power and offsets maxp2ga0=78 maxp2ga1=79 maxp5ga0=73,71,71,72 maxp5ga1=73,73,72,72 subband5gver=0x4 paparambwver=3 cckpwroffset0=0 cckpwroffset1=0 pdoffset40ma0=0x4433 pdoffset80ma0=0x3232 pdoffset40ma1=0x2333 pdoffset80ma1=0x1222 cckbw202gpo=0x1111 cckbw20ul2gpo=0x0000 mcsbw202gpo=0x00544331 mcsbw402gpo=0x00000000 dot11agofdmhrbw202gpo=0x3322 ofdmlrbw202gpo=0x0011 mcsbw205glpo=0xF9422110 mcsbw405glpo=0xD9442211 mcsbw805glpo=0xD9775533 mcsbw1605glpo=0 mcsbw205gmpo=0xF9422110 mcsbw405gmpo=0xC8331100 mcsbw805gmpo=0xC8664422 mcsbw1605gmpo=0 mcsbw205ghpo=0xF9422110 mcsbw405ghpo=0xD9442211 mcsbw805ghpo=0xD9775533 powoffs2gtna0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 powoffs2gtna1=0,0,0,0,0,0,0,0,0,0,0,-1,-1,-1 mcs1024qam2gpo=0xFFFF mcs1024qam5glpo=0xFFFFFF mcs1024qam5gmpo=0xFFFFFF mcs1024qam5ghpo=0xFFFFFF mcs1024qam5gx1po=0xFFFFFF mcs1024qam5gx2po=0xFFFFFF mcs8poexp=0 mcs9poexp=0 mcs10poexp=0 # 5G power offset per channel for band edge channel powoffs5g20mtna0=0,0,0,0,0,0,0 powoffs5g20mtna1=0,0,0,0,0,0,0 powoffs5g40mtna0=0,0,0,0,0 powoffs5g40mtna1=0,0,0,0,0 powoffs5g80mtna0=0,0,0,0,0 powoffs5g80mtna1=0,0,0,0,0 mcs11poexp=0 #LTE Coex Related ltecxmux=0 ltecxpadnum=0x0504 ltecxfnsel=0x44 ltecxgcigpio=0x04 #OOB params #device_wake_opt=1 host_wake_opt=0 # SWCTRL Related swctrlmap_2g=0x10101010,0x06030401,0x04011010,0x000000,0x3FF swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000 swctrlmap_5g=0x80408040,0x21240120,0x01208040,0x000000,0x3FF swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000 clb2gslice0core0=0x01b clb2gslice1core0=0x000 clb5gslice0core0=0x064 clb5gslice1core0=0x000 clb2gslice0core1=0x056 clb2gslice1core1=0x000 clb5gslice0core1=0x0a1 clb5gslice1core1=0x000 btc_prisel_ant_mask=0x2 clb_swctrl_smask_ant0=0x27f clb_swctrl_smask_ant1=0x2f7 #BT Coex 1:TDM btc_mode=1 # --- PAPD Cal related params ---- txwbpapden=0 # 0:NBPAPD 1:WBPAPD # NB PAPD Cal params nb_eps_offset=470,470 nb_bbmult=66,66 nb_papdcalidx=6,6 nb_txattn=2,2 nb_rxattn=1,1 nb_eps_stopidx=63 epsilonoff_5g20_c0=0,0,0,0 epsilonoff_5g40_c0=0,0,0,0 epsilonoff_5g80_c0=2,0,-1,1 epsilonoff_5g20_c1=0,0,0,0 epsilonoff_5g40_c1=0,0,0,0 epsilonoff_5g80_c1=0,0,0,0 epsilonoff_2g20_c0=0 epsilonoff_2g20_c1=0 # energy detect threshold ed_thresh2g=-67 ed_thresh5g=-67 # energy detect threshold for EU eu_edthresh2g=-67 eu_edthresh5g=-67 #rpcal coef for imptxbf rpcal5gb0=238 rpcal5gb1=228 rpcal5gb2=222 rpcal5gb3=229 rpcal2g=15 ocl=0 bt_coex_chdep_div=1 # OLPC Related disable_olpc=0 olpc_thresh5g=32 olpc_anchor5g=40 olpc_thresh2g=32 olpc_anchor2g=40 #PAPR related paprdis=0 paprrmcsgamma2g=500,550,550,-1,-1,-1,-1,-1,-1,-1,-1,-1 paprrmcsgain2g=128,128,128,0,0,0,0,0,0,0,0,0 paprrmcsgamma2g_ch13=500,550,550,-1,-1,-1,-1,-1,-1,-1,-1,-1 paprrmcsgain2g_ch13=128,128,128,0,0,0,0,0,0,0,0,0 paprrmcsgamma2g_ch1=500,550,550,-1,-1,-1,-1,-1,-1,-1,-1,-1 paprrmcsgain2g_ch1=128,128,128,0,0,0,0,0,0,0,0,0 paprrmcsgamma5g20=500,500,500,-1,-1,-1,-1,-1,-1,-1,-1,-1 paprrmcsgain5g20=128,128,128,0,0,0,0,0,0,0,0,0 paprrmcsgamma5g40=600,600,600,-1,-1,-1,-1,-1,-1,-1,-1,-1 paprrmcsgain5g40=128,128,128,0,0,0,0,0,0,0,0,0 paprrmcsgamma5g80=-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 paprrmcsgain5g80=0,0,0,0,0,0,0,0,0,0,0,0 # Enable papd for cck when target pwr ge 16dBm cckpapd_pwrthresh=64 muxenab=0x10 # ########### BTC Dynctl profile params ############ # flags:bit0 - dynctl enabled, bit1 dynamic desense, bit2 dynamic mode, bit 3 TX power control #btcdyn_flags=1 #btcdyn_default_btc_mode=5 #btcdyn_msw_rows=0 #btcdyn_dsns_rows=0 #btc_params1007=100 #btc_params1017=4