android13/kernel-5.10/drivers/net/wireless/rockchip_wlan/rtl8723bu/include/autoconf.h

333 lines
8.5 KiB
C
Executable File

/******************************************************************************
*
* Copyright(c) 2007 - 2014 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/*
* Public General Config
*/
#define AUTOCONF_INCLUDED
#define RTL871X_MODULE_NAME "8723BU"
#define DRV_NAME "rtl8723bu"
#ifndef CONFIG_RTL8723B
#define CONFIG_RTL8723B
#endif
#define CONFIG_USB_HCI
#define PLATFORM_LINUX
/*
* Wi-Fi Functions Config
*/
#define CONFIG_80211N_HT
#define CONFIG_RECV_REORDERING_CTRL
//#define CONFIG_IOCTL_CFG80211 // Set from Makefile
#ifdef CONFIG_IOCTL_CFG80211
/*
* Indecate new sta asoc through cfg80211_new_sta
* If kernel version >= 3.2 or
* version < 3.2 but already apply cfg80211 patch,
* RTW_USE_CFG80211_STA_EVENT must be defiend!
*/
//#define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */
#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
//#define CONFIG_DEBUG_CFG80211
//#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
#define CONFIG_SET_SCAN_DENY_TIMER
/* #define SUPPLICANT_RTK_VERSION_LOWER_THAN_JB42*/ /* wpa_supplicant realtek version <= jb42 will be defined this */
#endif
#define CONFIG_AP_MODE
#ifdef CONFIG_AP_MODE
#define CONFIG_NATIVEAP_MLME
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_HOSTAPD_MLME
#endif
//#define CONFIG_FIND_BEST_CHANNEL
#define CONFIG_TX_MCAST2UNI // Support IP multicast->unicast
//#define CONFIG_AUTO_AP_MODE
#endif
#define CONFIG_P2P
#ifdef CONFIG_P2P
//Added by Albert 20110812
//The CONFIG_WFD is for supporting the Wi-Fi display
#define CONFIG_WFD
#define CONFIG_P2P_REMOVE_GROUP_INFO
//#define CONFIG_DBG_P2P
#define CONFIG_P2P_PS
#define CONFIG_P2P_OP_CHK_SOCIAL_CH
#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT //replace CONFIG_P2P_CHK_INVITE_CH_LIST flag
#define CONFIG_P2P_INVITE_IOT
#endif
// Added by Kurt 20110511
#ifdef CONFIG_TDLS
#define CONFIG_TDLS_DRIVER_SETUP
// #ifndef CONFIG_WFD
// #define CONFIG_WFD
// #endif
// #define CONFIG_TDLS_AUTOSETUP
#define CONFIG_TDLS_AUTOCHECKALIVE
/* #define CONFIG_TDLS_CH_SW */ /* Enable this flag only when we confirm that TDLS CH SW is supported in FW */
#endif
//#define CONFIG_CONCURRENT_MODE // Set from Makefile
#ifdef CONFIG_CONCURRENT_MODE
#define CONFIG_TSF_RESET_OFFLOAD // For 2 PORT TSF SYNC.
//#define CONFIG_HWPORT_SWAP // Port0->Sec , Port1 -> Pri
#define CONFIG_RUNTIME_PORT_SWITCH
//#define DBG_RUNTIME_PORT_SWITCH
#define CONFIG_SCAN_BACKOP
//#define CONFIG_MULTI_VIR_IFACES //besides primary&secondary interfaces, extend to support more interfaces
#endif // CONFIG_CONCURRENT_MODE
#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
#define CONFIG_80211D
/*
* Hareware/Firmware Related Config
*/
//#define CONFIG_ANTENNA_DIVERSITY // Set from Makefile
//#define SUPPORT_HW_RFOFF_DETECTED
#define CONFIG_LED
#ifdef CONFIG_LED
#define CONFIG_SW_LED
#ifdef CONFIG_SW_LED
//#define CONFIG_LED_HANDLED_BY_CMD_THREAD
#endif
#endif // CONFIG_LED
#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif
#define CONFIG_C2H_PACKET_EN
#define CONFIG_RF_GAIN_OFFSET
#define DISABLE_BB_RF 0
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
/*
* Interface Related Config
*/
#define CONFIG_USB_TX_AGGREGATION
#define CONFIG_USB_RX_AGGREGATION
#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface
#define CONFIG_GLOBAL_UI_PID
#define CONFIG_OUT_EP_WIFI_MODE
#define ENABLE_USB_DROP_INCORRECT_OUT
//#define CONFIG_SUPPORT_USB_INT
#ifdef CONFIG_SUPPORT_USB_INT
//#define CONFIG_USB_INTERRUPT_IN_PIPE
#endif
//#define CONFIG_REDUCE_USB_TX_INT // Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms.
/*
* CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
*/
//#define CONFIG_USE_USB_BUFFER_ALLOC_TX // Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms.
//#define CONFIG_USE_USB_BUFFER_ALLOC_RX // For RX path
/*
* USB VENDOR REQ BUFFER ALLOCATION METHOD
* if not set we'll use function local variable (stack memory)
*/
//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
#define CONFIG_USB_VENDOR_REQ_MUTEX
#define CONFIG_VENDOR_REQ_RETRY
//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ
/*
* Others
*/
#define CONFIG_SKB_COPY //for amsdu
//#define CONFIG_EASY_REPLACEMENT
//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general...
//#define CONFIG_RESUME_IN_WORKQUEUE
//#define CONFIG_SET_SCAN_DENY_TIMER
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm
#ifdef CONFIG_SIGNAL_DISPLAY_DBM
//#define CONFIG_BACKGROUND_NOISE_MONITOR
#endif
//#define CONFIG_CHECK_AC_LIFETIME // Check packet lifetime of 4 ACs.
#define CONFIG_EMBEDDED_FWIMG
//#define CONFIG_FILE_FWIMG
#define CONFIG_LONG_DELAY_ISSUE
#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR
/*
* Auto Config Section
*/
#ifdef CONFIG_MINIMAL_MEMORY_USAGE
#undef CONFIG_USB_TX_AGGREGATION
#undef CONFIG_USB_RX_AGGREGATION
#endif
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT
//#undef CONFIG_USB_TX_AGGREGATION
//#undef CONFIG_USB_RX_AGGREGATION
#else // !CONFIG_MP_INCLUDED
#define MP_DRIVER 0
#endif // !CONFIG_MP_INCLUDED
#ifdef CONFIG_POWER_SAVING
#define CONFIG_IPS
#define CONFIG_LPS
#ifdef CONFIG_IPS
//#define CONFIG_IPS_LEVEL_2 1 //enable this to set default IPS mode to IPS_LEVEL_2
#endif
#if defined(CONFIG_LPS) && defined(CONFIG_SUPPORT_USB_INT)
//#define CONFIG_LPS_LCLK
#endif
#ifdef CONFIG_LPS_LCLK
#define CONFIG_XMIT_THREAD_MODE
#endif
#endif // CONFIG_POWER_SAVING
#ifdef CONFIG_BT_COEXIST
// for ODM and outsrc BT-Coex
#ifndef CONFIG_LPS
#define CONFIG_LPS // download reserved page to FW
#endif
#ifndef CONFIG_C2H_PACKET_EN
#define CONFIG_C2H_PACKET_EN
#endif
#endif // !CONFIG_BT_COEXIST
#ifdef CONFIG_WOWLAN
//#define CONFIG_GTK_OL
#endif // CONFIG_WOWLAN
#ifdef CONFIG_GPIO_WAKEUP
#ifndef WAKEUP_GPIO_IDX
#define WAKEUP_GPIO_IDX 14 // WIFI Chip Side
#endif // !WAKEUP_GPIO_IDX
#endif // CONFIG_GPIO_WAKEUP
#ifdef CONFIG_AP_MODE
//#define CONFIG_INTERRUPT_BASED_TXBCN // Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs
#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
#undef CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
//#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#endif
#endif // CONFIG_AP_MODE
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
#else
#define CONFIG_PREALLOC_RECV_SKB
#ifdef CONFIG_PREALLOC_RECV_SKB
//#define CONFIG_FIX_NR_BULKIN_BUFFER /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
#endif
#endif
#ifdef CONFIG_USB_TX_AGGREGATION
//#define CONFIG_TX_EARLY_MODE
#endif
#ifdef CONFIG_TX_EARLY_MODE
#define RTL8723B_EARLY_MODE_PKT_NUM_10 0
#endif
/*
* Debug Related Config
*/
#define CONFIG_DEBUG /* DBG_871X, etc... */
#ifdef CONFIG_DEBUG
#define DBG 1 // for ODM & BTCOEX debug
//#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */
#else // !CONFIG_DEBUG
#define DBG 0 // for ODM & BTCOEX debug
#endif // !CONFIG_DEBUG
#define CONFIG_PROC_DEBUG
//#define DBG_CONFIG_ERROR_DETECT
//#define DBG_CONFIG_ERROR_DETECT_INT
//#define DBG_CONFIG_ERROR_RESET
//#define DBG_IO
//#define DBG_DELAY_OS
//#define DBG_MEM_ALLOC
//#define DBG_IOCTL
//#define DBG_TX
//#define DBG_XMIT_BUF
//#define DBG_XMIT_BUF_EXT
//#define DBG_TX_DROP_FRAME
//#define DBG_RX_DROP_FRAME
//#define DBG_RX_SEQ
//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "rtw-ap"
//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
//#define DBG_ROAMING_TEST
//#define DBG_HAL_INIT_PROFILING
//#define DBG_MEMORY_LEAK 1