android13/u-boot/board/solidrun/clearfog
liiir1985 7f62dcda9f initial 2024-06-22 20:45:49 +08:00
..
MAINTAINERS initial 2024-06-22 20:45:49 +08:00
Makefile initial 2024-06-22 20:45:49 +08:00
README initial 2024-06-22 20:45:49 +08:00
clearfog.c initial 2024-06-22 20:45:49 +08:00
kwbimage.cfg initial 2024-06-22 20:45:49 +08:00

README

Update from original Marvell U-Boot to mainline U-Boot:
-------------------------------------------------------

Generate the U-Boot image with these commands:

$ make clearfog_defconfig
$ make

The resulting image including the SPL binary with the
full DDR setup is "u-boot-spl.kwb".

Now all you need to do is copy this image on a SD card.
For example with this command:

$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1

Please use the correct device node for your setup instead
of "/dev/sdX" here!