rk3588-game
/
android13
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
android13/external/mtools/debian/changelog

360 lines
14 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

mtools (4.0.37) stable; urgency=low
* Removed mclasserase commands, which doesn't fit the coding
structure of the rest of mtools
* Add support to -i option to mcd
* Document -i in mtools.1
* Fix a missing commad error in floppyd_io.c
-- Alain Knaff <alain@knaff.lu> Sun, 26 Dec 2021 18:57:02 +0100
mtools (4.0.36) stable; urgency=low
* Fix error status of recursive listing of empty root directory
* If recursive listing, also show matched files at level one
* Use "seekless" reads & write internally, where possible
* Text mode conversion refactoring
* Misc refactoring
-- Alain Knaff <alain@knaff.lu> Sun, 21 Nov 2021 16:41:10 +0100
mtools (4.0.35) stable; urgency=low
* Fix cluster padding at end of file in batch mode, and add comments
about what happens here
-- Alain Knaff <alain@knaff.lu> Fri, 6 Aug 2021 20:13:59 +0200
mtools (4.0.34) stable; urgency=low
* Fix mcopy -s issue
-- Alain Knaff <alain@knaff.lu> Fri, 23 Jul 2021 12:41:11 +0200
mtools (4.0.33) stable; urgency=low
* Fix support for partitions (broken in 4.0.30)
* Portability fixes for Solaris 10 and 11
* General simplification of configure script, and largefile handling
* Tested and fixed for platforms *without* largefile support
* In cases where lseek works with 32-bit offsets, prefer lseek64 over llseek
* Fixed floppy sector size handling on platforms that are not Linux
* Added support for image files on command line to mcat
-- Alain Knaff <alain@knaff.lu> Sat, 17 Jul 2021 18:31:38 +0200
mtools (4.0.32) stable; urgency=low
* Simplify algorithm that choses filesystem parameters for format, and align
it more closely with what Win7 does
* Fix mformatting XDF when XDF not explicitly specified on mformat command
line
* easier way to enter sizes on mformat command line (mformat -C -T 1440K)
* For small sizes, mformat assumes floppy geometries (heads 1 or 2,
tracks 40 or 80)
* Handle attempts to mformat too small filesystems more gracefully
* Enable minfo to print out additional mformat command line parameters, if
the present filesystem uses non-default values for these
* minfo no longer prints bigsect if smallsect is set
* for remap filter, error when trying to write non-zero data to unmapped
sectors
* Fix misc compilation warnings occuring when disabling certain features
(largefiles, raw-term)
-- Alain Knaff <alain@knaff.lu> Sat, 10 Jul 2021 14:31:23 +0200
mtools (4.0.31) stable; urgency=low
* Move Linux-specific block device sizing code into
linux-specific section of devices.c
* Error messages for all failure cases on fs_init failure
* Fix compilation without XDF support (OpenImage signature)
* Fix polarity of format_xdf command-line parameter of mformat
* In XDF_IO retry enough times to actually succeed, even if
FDC was in a bad state before
* Remove useless buffer flushing triggered when giving up a
reference to a stream node that is still referenced
elsewhere.
* Clearer error message if neither size nor geometry of drive
to be mformatted is known
* In mformat, make Fs dynamically allocated rather than
on-stack, so as to be able to use utilities supplied by
stream.c
* Remove duplicate writing of backup boot sector
* Allow to infer geometry if only size is specified
* Protect against attempt to create zero-sized buffer
* Code simplification in mattrib
* Remove dead code in mpartition
-- Alain Knaff <alain@knaff.lu> Sat, 19 Jun 2021 17:22:27 +0200
mtools (4.0.30) stable; urgency=low
* Fixed XDF floppy disk access
* Fixed faulty behavior at end of image in mcat
* Device/Image size handling refactoring
* allow remap to write to zero-backed sectors (may happen if
buffer is flushed, and is not an error in that case)
* Raise an error when trying to mcopy multiple source files
over a single destination file (rather than directory)
* fix handling of "hidden" sectors (is a 2 byte quantity on
small disks, not 4 byte as previously assumed)
* Modernize partition support. Tuned consistency check to
actually check about important issues (such as overlapping
partitions) rather than stuff nobody else cares about
(alignment on entire cylinder boundaries)
* Move various "filter" options (partition, offset, swap,
scsi) into separate classes, rather than leaving almost
everything in plain_io
* Simplify and centralize geometry handling and LBA code
* Fix some more more compiler warnings
-- Alain Knaff <alain@knaff.lu> Thu, 17 Jun 2021 22:23:39 +0200
mtools (4.0.29) stable; urgency=low
* -Fix bug in cluster preallocation, which was accidentally introduced by compiler warning "fixes" from v4_0_28
-- Alain Knaff <alain@knaff.lu> Mon, 31 May 2021 19:07:43 +0200
mtools (4.0.28) stable; urgency=low
* Support remapping of data (for not-quite linear floppy image files)
* Re-open floppy devices read-write if geometry parameters need to be changed
* relax consistency checks in mpartition (partitions created by current fdisk would almost never pass these checks)
* Fix some compiler warnings
-- Alain Knaff <alain@knaff.lu> Sun, 30 May 2021 18:33:09 +0200
mtools (4.0.27) stable; urgency=low
* Fix type error in calls to iconv functions
-- Alain Knaff <alain@knaff.lu> Fri, 16 Apr 2021 20:54:49 +0200
mtools (4.0.26) stable; urgency=low
* Fix compilation on Macintosh
* Ignore image file locking errors if we are performing a read-only access anyways
* Minor man-page fixes
-- Alain Knaff <alain@knaff.lu> Sat, 28 Nov 2020 12:46:04 +0100
mtools (4.0.25) stable; urgency=low
* Preserve non-updated contents of info sector, just in case it contains program code
* When parsing config file, always use "C" locale for case-insensitive comparisons
-- Alain Knaff <alain@knaff.lu> Sat, 24 Oct 2020 16:53:52 +0200
mtools (4.0.24) stable; urgency=low
* Spelling fixes in documentation
* Permit calling "make install" with >= -j2
* Added AC_SYS_LARGEFILE, needed for compiling on certain ARM procs
-- Alain Knaff <alain@knaff.lu> Sun, 22 Mar 2020 07:45:19 +0100
mtools (4.0.23) stable; urgency=low
* Address lots of compiler warnings (assignments between different types)
* Network speedup fixes for floppyd (TCP_CORK)
* Typo fixes
* Explicitly pass available target buffer size for character set conversions
-- Alain Knaff <alain@knaff.lu> Sun, 9 Dec 2018 23:26:50 +0100
mtools (4.0.22) stable; urgency=low
* Fixed -f flag for mformat (size is KBytes, rather than sectors)
* Fixed toupper/tolower usage (unsigned char rather than plain signed)
-- Alain Knaff <alain@knaff.lu> Sun, 2 Dec 2018 18:29:59 +0100
mtools (4.0.21) stable; urgency=low
* Fixed compilation for MingW
* After MingW compilation, make sure executable has .exe extension
* Addressed compiler warnings
* Fixed length handling in character set conversion (Unicode file names)
* Fixed matching of character range, when containing Unicode characters (mdir "c:test[α-ω].exe")
* Fixed initialization of my_scsi_cmd constructor
-- Alain Knaff <alain@knaff.lu> Sat, 24 Nov 2018 09:50:03 +0100
mtools (4.0.20) stable; urgency=low
* initialize directory entries to 0
* bad message "Too few sectors" replaced with "Too many sectors"
* apostrophe in mlabel no longer causes generation of long entry
* option to fake system date for file creation using the SOURCE_DATE_EPOCH environment variables
* can now be compiled with "clang" compiler
* fallback function for strndup, for those platforms that don't have it
* fixed a number of -Wextra warnings
* new compressed archive formats for uz/lz
* allow to specify number of reserved sectors for FAT32.
* file/device locking with timeout (rather than immediate failure)
* fixed support for BPB-less legacy formats.
* removed check that disk must be an integer number of tracks.
* removed .eh/.oh macros from manual pages
-- Alain Knaff <alain@knaff.lu> Sun, 11 Nov 2018 14:56:06 +0100
mtools (4.0.19) stable; urgency=low
* Fix for short file names starting with character 0xE5
(by remapping it to 0x5)
* mpartition: Partition types closer to what Microsoft uses
* mformat: figure out LBA geometry as last resort if geometry
* is neither specified in config and/or commandline, nor can be
* queried from the device
* mformat: use same default cluster size by size as Microsoft
for FAT32
* additional sanity checks
* document how cluster size is picked in mformat.c man page
* document how partition types are picked in mpartition.c man page
-- Alain Knaff <alain@knaff.lu> Thu, 29 Sep 2018 12:00:00 +0200
mtools (4.0.18) stable; urgency=low
* Fix for names of iconv encodings on AIX
* Fix mt_size_t on NetBSD
* Fixed compilation on Mingw
* Fixed doc (especially mformat)
* Fix mformat'ing of FAT12 filesystems with huge cluster sizes
* Minfo prints image file name in mformat command line if an image
* file name was given
* Always generate gzip-compressed RPMs, in order to remain
* compatible with older distributions
* Fixed buffer overflow with drive letter in mclasserase
-- Alain Knaff <alain@knaff.lu> Wed, 9 Jan 2013 00:21:20 +0200
mtools (4.0.17) stable; urgency=low
* mbadblocks now takes a list of bad blocks (either as sectors
or as clusters)
* mbadblocks now is able to do write scanning for bad blocks
* mshowfat can show cluster of specific offset
* Enable mtools to deal with very small sector sizes...
* Fixed encoding of all-lowercase names (no need to mangle
these)
* Consider every directory entry after an ENDMARK (0x00) to be deleted
* After writing a new entry at end of a directory, be sure to also add
an ENDMARK (0x00)
* Deal with possibility of a NULL pointer being returned by
localtime during timestamp conversion
-- Alain Knaff <alain@knaff.lu> Wed, 29 Jun 2011 00:21:20 +0200
mtools (4.0.16) stable; urgency=low
* configure.in fixes
* fixed formatting of fat_size_calculation.tex document
* compatibility with current autoconfig versions
* Make it clear that label is limited to 11 characters
* Fixed typo in initialization of FAT32 info sector
-- Alain Knaff <alain@knaff.lu> Sat, 16 Apr 2011 18:00:30 +0200
mtools (4.0.15) stable; urgency=low
* Added missing -i option to mshortname
* Split .deb package into mtools and floppyd in order to
match Ubuntu
-- Alain Knaff <alain@knaff.lu> Sun, 17 Oct 2010 19:42:46 +0200
mtools (4.0.14) stable; urgency=low
* New mshortname command
* Fix floppyd for disks bigger than 2 Gig
* Remove obsolete -z flag
* Remove now unsupported AC_USE_SYSTEM_EXTENSIONS
* Fixed output formatting of mdir if MTOOLS_DOTTED_DIR is set
* Mformat now correctly writes backup boot sector
* Fixed signedness of serial number in mlabel
* Fixed buffer size problem in mlabel
* Make mlabel write backup boot sector if FAT32
* Catch situation where both clear and new label are given to mlabel
* Quote filename parameters to scripts
* Mformat: Close file descriptor for boot sector
* Added lzip support to scripts/uz
* Added Tot_sectors option to mformat
* Fixed hidden sector handling in mformat
* Minfo generates mformat command lines containing new -T option
* Mlabel prints error if label too long
-- Alain Knaff <alain@knaff.lu> Tue, 12 Oct 2010 00:19:48 +0200
mtools (4.0.13) stable; urgency=low
* Merged Debian patches
-- Alain Knaff <alain@knaff.lu> Sun, 28 Feb 2010 15:33:45 +0100
mtools (4.0.12) stable; urgency=low
* Mingw compatibility fixes
-- Alain Knaff <alain@knaff.lu> Tue, 3 Nov 2009 21:26:58 +0100
mtools (4.0.11) stable; urgency=low
* Fixed compiler in mlabel.c and elsewhere
* Fixed h flag in mattrib.c
* Added missing error checking in floppyd and elsewhere
-- Alain Knaff <alain@knaff.lu> Sat, 29 Aug 2009 14:38:19 +0200
mtools (4.0.10) stable; urgency=low
* More copyright stuff
* Fixed issues with max filesize (was 2GB instead of 4GB, and
warned only after copying the beginning)
-- Alain Knaff <alain@knaff.lu> Tue, 3 Mar 2009 22:14:04 +0100
mtools (4.0.9) stable; urgency=low
* More copyright stuff
-- Alain Knaff <alain@knaff.lu> Mon, 2 Mar 2009 22:15:54 +0100
mtools (4.0.8) stable; urgency=low
* Copyright notices
-- Alain Knaff <alain@knaff.lu> Sun, 1 Mar 2009 00:36:22 +0100
mtools (4.0.7) stable; urgency=low
* Fixed conversion to native on OS/2
* Fix parsing of --help flag
-- Alain Knaff <alain@knaff.lu> Tue, 24 Feb 2009 19:55:46 +0100
mtools (4.0.6) stable; urgency=low
* Fallback for missing wchar_t iconv codepage on OS/2
* Fixes for LSEEK64 support
* Support for --help that returns a 0 exit status
-- Alain Knaff <alain@knaff.lu> Sun, 22 Feb 2009 02:04:32 +0100
mtools (4.0.5) stable; urgency=low
* Make setpgrp() usage in floppyd conditional
* Re-instate PACKED around structure (ARM)
* LSEEK64
-- Alain Knaff <alain@knaff.lu> Thu, 19 Feb 2009 23:55:04 +0100
mtools (4.0.4) stable; urgency=low
* BSD support: SCSI, use getuserid/getgroupid in floppyd
* Another attempt at putwc fix for OS/2
* Further GNU fixes
* Fallback for putwc if there is wchar (OS/2)
-- Alain Knaff <alain@knaff.lu> Sun, 15 Feb 2009 16:18:32 +0100
mtools (4.0.3) stable; urgency=low
* Fix multipart pathname parsing bug in vfat.c (forgot limited length)
* Supplied fallback define for putwc
* Copyright notices in all sources
-- Alain Knaff <alain@knaff.lu> Mon, 9 Feb 2009 21:46:01 +0100
mtools (4.0.2) stable; urgency=low
* Fixed off-by-2 error in unix_name in file_name.c
-- Alain Knaff <alain@knaff.lu> Mon, 26 Jan 2009 22:58:06 +0100
mtools (4.0.1) stable; urgency=low
* Missing functions on Solaris
-- Alain Knaff <alain@knaff.lu> Sun, 7 Dec 2008 21:38:55 +0100
mtools (4.0.0) stable; urgency=low
* Offset for -i-specified image files
-- Alain Knaff <alain@knaff.lu> Sat, 29 Nov 2008 09:20:30 +0100
mtools (4.0.0-pre2) stable; urgency=low
* Use transliteration to represent characters which don't exist in
target set
-- Alain Knaff <alain@knaff.lu> Tue, 18 Nov 2008 22:42:23 +0100
mtools (4.0.0-pre1) stable; urgency=low
* Unicode support
-- Alain Knaff <alain@knaff.lu> Sat, 1 Nov 2008 20:52:58 +0100
mtools (3.9.11-20071226) stable; urgency=low
* first release of debian package
-- Alain Knaff <alain@knaff.lu> Tue, 28 Aug 2007 23:23:37 +0100
Reference in New Issue View Git Blame Copy Permalink