676 lines
17 KiB
C
676 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2018 Rockchip Electronics Co., Ltd.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <debug_uart.h>
|
|
#include <dm.h>
|
|
#include <ram.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cru_px30.h>
|
|
#include <asm/arch/grf_px30.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/sdram.h>
|
|
#include <asm/arch/sdram_px30.h>
|
|
|
|
/*
|
|
* Because px30 sram size is small, so need define CONFIG_TPL_TINY_FRAMEWORK
|
|
* to reduce TPL size when build TPL firmware.
|
|
*/
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#ifndef CONFIG_TPL_TINY_FRAMEWORK
|
|
#error please defined CONFIG_TPL_TINY_FRAMEWORK for px30 !!!
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_TPL_BUILD
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
struct dram_info {
|
|
struct ddr_pctl_regs *pctl;
|
|
struct ddr_phy_regs *phy;
|
|
struct px30_cru *cru;
|
|
struct msch_regs *msch;
|
|
struct px30_ddr_grf_regs *ddr_grf;
|
|
struct px30_grf *grf;
|
|
struct ram_info info;
|
|
struct px30_pmugrf *pmugrf;
|
|
};
|
|
|
|
#define PMUGRF_BASE_ADDR 0xFF010000
|
|
#define CRU_BASE_ADDR 0xFF2B0000
|
|
#define GRF_BASE_ADDR 0xFF140000
|
|
#define DDRC_BASE_ADDR 0xFF600000
|
|
#define DDR_PHY_BASE_ADDR 0xFF2A0000
|
|
#define SERVER_MSCH0_BASE_ADDR 0xFF530000
|
|
#define DDR_GRF_BASE_ADDR 0xff630000
|
|
|
|
struct dram_info dram_info;
|
|
|
|
struct px30_sdram_params sdram_configs[] = {
|
|
#ifdef CONFIG_ROCKCHIP_RK3326
|
|
#include "sdram-px30-lpddr3-detect-333.inc"
|
|
#else
|
|
#include "sdram-px30-ddr3-detect-333.inc"
|
|
#endif
|
|
};
|
|
|
|
struct ddr_phy_skew skew = {
|
|
#include "sdram-px30-ddr_skew.inc"
|
|
};
|
|
|
|
static void rkclk_ddr_reset(struct dram_info *dram,
|
|
u32 ctl_srstn, u32 ctl_psrstn,
|
|
u32 phy_srstn, u32 phy_psrstn)
|
|
{
|
|
writel(upctl2_srstn_req(ctl_srstn) | upctl2_psrstn_req(ctl_psrstn) |
|
|
upctl2_asrstn_req(ctl_srstn),
|
|
&dram->cru->softrst_con[1]);
|
|
writel(ddrphy_srstn_req(phy_srstn) | ddrphy_psrstn_req(phy_psrstn),
|
|
&dram->cru->softrst_con[2]);
|
|
}
|
|
|
|
static void rkclk_set_dpll(struct dram_info *dram, unsigned int hz)
|
|
{
|
|
unsigned int refdiv, postdiv1, postdiv2, fbdiv;
|
|
int delay = 1000;
|
|
u32 mhz = hz / MHz;
|
|
|
|
refdiv = 1;
|
|
if (mhz <= 300) {
|
|
postdiv1 = 4;
|
|
postdiv2 = 2;
|
|
} else if (mhz <= 400) {
|
|
postdiv1 = 6;
|
|
postdiv2 = 1;
|
|
} else if (mhz <= 600) {
|
|
postdiv1 = 4;
|
|
postdiv2 = 1;
|
|
} else if (mhz <= 800) {
|
|
postdiv1 = 3;
|
|
postdiv2 = 1;
|
|
} else if (mhz <= 1600) {
|
|
postdiv1 = 2;
|
|
postdiv2 = 1;
|
|
} else {
|
|
postdiv1 = 1;
|
|
postdiv2 = 1;
|
|
}
|
|
fbdiv = (mhz * refdiv * postdiv1 * postdiv2) / 24;
|
|
|
|
writel(DPLL_MODE(CLOCK_FROM_XIN_OSC), &dram->cru->mode);
|
|
|
|
writel(POSTDIV1(postdiv1) | FBDIV(fbdiv), &dram->cru->pll[1].con0);
|
|
writel(DSMPD(1) | POSTDIV2(postdiv2) | REFDIV(refdiv),
|
|
&dram->cru->pll[1].con1);
|
|
|
|
while (delay > 0) {
|
|
udelay(1);
|
|
if (LOCK(readl(&dram->cru->pll[1].con1)))
|
|
break;
|
|
delay--;
|
|
}
|
|
|
|
writel(DPLL_MODE(CLOCK_FROM_PLL), &dram->cru->mode);
|
|
}
|
|
|
|
static void rkclk_configure_ddr(struct dram_info *dram,
|
|
struct px30_sdram_params *sdram_params)
|
|
{
|
|
/* for inno ddr phy need 2*freq */
|
|
rkclk_set_dpll(dram, sdram_params->base.ddr_freq * MHz * 2);
|
|
}
|
|
|
|
/* return ddrconfig value
|
|
* (-1), find ddrconfig fail
|
|
* other, the ddrconfig value
|
|
* only support cs0_row >= cs1_row
|
|
*/
|
|
static unsigned int calculate_ddrconfig(struct px30_sdram_params *sdram_params)
|
|
{
|
|
struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info;
|
|
u32 bw, die_bw, col, bank;
|
|
u32 i, tmp;
|
|
u32 ddrconf = -1;
|
|
|
|
bw = cap_info->bw;
|
|
die_bw = cap_info->dbw;
|
|
col = cap_info->col;
|
|
bank = cap_info->bk;
|
|
|
|
if (sdram_params->base.dramtype == DDR4) {
|
|
if (die_bw == 0)
|
|
ddrconf = 7 + bw;
|
|
else
|
|
ddrconf = 12 - bw;
|
|
ddrconf = d4_rbc_2_d3_rbc[ddrconf - 7];
|
|
} else {
|
|
tmp = ((bank - 2) << 3) | (col + bw - 10);
|
|
for (i = 0; i < 7; i++)
|
|
if ((ddr_cfg_2_rbc[i] & 0xf) == tmp) {
|
|
ddrconf = i;
|
|
break;
|
|
}
|
|
if (i > 6)
|
|
printascii("calculate ddrconfig error\n");
|
|
}
|
|
|
|
return ddrconf;
|
|
}
|
|
|
|
/*
|
|
* calculate controller dram address map, and setting to register.
|
|
* argument sdram_params->ch.ddrconf must be right value before
|
|
* call this function.
|
|
*/
|
|
static void set_ctl_address_map(struct dram_info *dram,
|
|
struct px30_sdram_params *sdram_params)
|
|
{
|
|
struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info;
|
|
void __iomem *pctl_base = dram->pctl;
|
|
u32 cs_pst, bg, max_row, ddrconf;
|
|
u32 i;
|
|
|
|
if (sdram_params->base.dramtype == DDR4)
|
|
/*
|
|
* DDR4 8bit dram BG = 2(4bank groups),
|
|
* 16bit dram BG = 1 (2 bank groups)
|
|
*/
|
|
bg = (cap_info->dbw == 0) ? 2 : 1;
|
|
else
|
|
bg = 0;
|
|
|
|
cs_pst = cap_info->bw + cap_info->col +
|
|
bg + cap_info->bk + cap_info->cs0_row;
|
|
if (cs_pst >= 32 || cap_info->rank == 1)
|
|
writel(0x1f, pctl_base + DDR_PCTL2_ADDRMAP0);
|
|
else
|
|
writel(cs_pst - 8, pctl_base + DDR_PCTL2_ADDRMAP0);
|
|
|
|
ddrconf = cap_info->ddrconfig;
|
|
if (sdram_params->base.dramtype == DDR4) {
|
|
for (i = 0; i < ARRAY_SIZE(d4_rbc_2_d3_rbc); i++) {
|
|
if (d4_rbc_2_d3_rbc[i] == ddrconf) {
|
|
ddrconf = 7 + i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
sdram_copy_to_reg((u32 *)(pctl_base + DDR_PCTL2_ADDRMAP1),
|
|
&addrmap[ddrconf][0], 8 * 4);
|
|
max_row = cs_pst - 1 - 8 - (addrmap[ddrconf][5] & 0xf);
|
|
|
|
if (max_row < 12)
|
|
printascii("set addrmap fail\n");
|
|
/* need to disable row ahead of rank by set to 0xf */
|
|
for (i = 17; i > max_row; i--)
|
|
clrsetbits_le32(pctl_base + DDR_PCTL2_ADDRMAP6 +
|
|
((i - 12) * 8 / 32) * 4,
|
|
0xf << ((i - 12) * 8 % 32),
|
|
0xf << ((i - 12) * 8 % 32));
|
|
|
|
if ((sdram_params->base.dramtype == LPDDR3 ||
|
|
sdram_params->base.dramtype == LPDDR2) &&
|
|
cap_info->row_3_4)
|
|
setbits_le32(pctl_base + DDR_PCTL2_ADDRMAP6, 1 << 31);
|
|
if (sdram_params->base.dramtype == DDR4 && cap_info->bw != 0x2)
|
|
setbits_le32(pctl_base + DDR_PCTL2_PCCFG, 1 << 8);
|
|
}
|
|
|
|
/*
|
|
* rank = 1: cs0
|
|
* rank = 2: cs1
|
|
*/
|
|
int read_mr(struct dram_info *dram, u32 rank, u32 mr_num)
|
|
{
|
|
void __iomem *ddr_grf_base = dram->ddr_grf;
|
|
|
|
pctl_read_mr(dram->pctl, rank, mr_num);
|
|
|
|
return (readl(ddr_grf_base + DDR_GRF_STATUS(0)) & 0xff);
|
|
}
|
|
|
|
#define MIN(a, b) (((a) > (b)) ? (b) : (a))
|
|
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
|
|
static u32 check_rd_gate(struct dram_info *dram)
|
|
{
|
|
void __iomem *phy_base = dram->phy;
|
|
|
|
u32 max_val = 0;
|
|
u32 min_val = 0xff;
|
|
u32 gate[4];
|
|
u32 i, bw;
|
|
|
|
bw = (readl(PHY_REG(phy_base, 0x0)) >> 4) & 0xf;
|
|
switch (bw) {
|
|
case 0x1:
|
|
bw = 1;
|
|
break;
|
|
case 0x3:
|
|
bw = 2;
|
|
break;
|
|
case 0xf:
|
|
default:
|
|
bw = 4;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < bw; i++) {
|
|
gate[i] = readl(PHY_REG(phy_base, 0xfb + i));
|
|
max_val = MAX(max_val, gate[i]);
|
|
min_val = MIN(min_val, gate[i]);
|
|
}
|
|
|
|
if (max_val > 0x80 || min_val < 0x20)
|
|
return -1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int data_training(struct dram_info *dram, u32 cs, u32 dramtype)
|
|
{
|
|
void __iomem *pctl_base = dram->pctl;
|
|
u32 dis_auto_zq = 0;
|
|
u32 pwrctl;
|
|
u32 ret;
|
|
|
|
/* disable auto low-power */
|
|
pwrctl = readl(pctl_base + DDR_PCTL2_PWRCTL);
|
|
writel(0, pctl_base + DDR_PCTL2_PWRCTL);
|
|
|
|
dis_auto_zq = pctl_dis_zqcs_aref(dram->pctl);
|
|
|
|
ret = phy_data_training(dram->phy, cs, dramtype);
|
|
|
|
pctl_rest_zqcs_aref(dram->pctl, dis_auto_zq);
|
|
|
|
/* restore auto low-power */
|
|
writel(pwrctl, pctl_base + DDR_PCTL2_PWRCTL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dram_set_bw(struct dram_info *dram, u32 bw)
|
|
{
|
|
phy_dram_set_bw(dram->phy, bw);
|
|
}
|
|
|
|
static void set_ddrconfig(struct dram_info *dram, u32 ddrconfig)
|
|
{
|
|
writel(ddrconfig | (ddrconfig << 8), &dram->msch->deviceconf);
|
|
rk_clrsetreg(&dram->grf->soc_noc_con[1], 0x3 << 14, 0 << 14);
|
|
}
|
|
|
|
static void sdram_msch_config(struct msch_regs *msch,
|
|
struct sdram_msch_timings *noc_timings,
|
|
struct sdram_cap_info *cap_info,
|
|
struct sdram_base_params *base)
|
|
{
|
|
u64 cs_cap[2];
|
|
|
|
cs_cap[0] = sdram_get_cs_cap(cap_info, 0, base->dramtype);
|
|
cs_cap[1] = sdram_get_cs_cap(cap_info, 1, base->dramtype);
|
|
writel(((((cs_cap[1] >> 20) / 64) & 0xff) << 8) |
|
|
(((cs_cap[0] >> 20) / 64) & 0xff),
|
|
&msch->devicesize);
|
|
|
|
writel(noc_timings->ddrtiminga0.d32,
|
|
&msch->ddrtiminga0);
|
|
writel(noc_timings->ddrtimingb0.d32,
|
|
&msch->ddrtimingb0);
|
|
writel(noc_timings->ddrtimingc0.d32,
|
|
&msch->ddrtimingc0);
|
|
writel(noc_timings->devtodev0.d32,
|
|
&msch->devtodev0);
|
|
writel(noc_timings->ddrmode.d32, &msch->ddrmode);
|
|
writel(noc_timings->ddr4timing.d32,
|
|
&msch->ddr4timing);
|
|
writel(noc_timings->agingx0, &msch->agingx0);
|
|
writel(noc_timings->agingx0, &msch->aging0);
|
|
writel(noc_timings->agingx0, &msch->aging1);
|
|
writel(noc_timings->agingx0, &msch->aging2);
|
|
writel(noc_timings->agingx0, &msch->aging3);
|
|
}
|
|
|
|
static void dram_all_config(struct dram_info *dram,
|
|
struct px30_sdram_params *sdram_params)
|
|
{
|
|
struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info;
|
|
u32 sys_reg2 = 0;
|
|
u32 sys_reg3 = 0;
|
|
|
|
set_ddrconfig(dram, cap_info->ddrconfig);
|
|
sdram_org_config(cap_info, &sdram_params->base, &sys_reg2,
|
|
&sys_reg3, 0);
|
|
writel(sys_reg2, &dram->pmugrf->os_reg[2]);
|
|
writel(sys_reg3, &dram->pmugrf->os_reg[3]);
|
|
sdram_msch_config(dram->msch, &sdram_params->ch.noc_timings, cap_info,
|
|
&sdram_params->base);
|
|
}
|
|
|
|
static void enable_low_power(struct dram_info *dram,
|
|
struct px30_sdram_params *sdram_params)
|
|
{
|
|
void __iomem *pctl_base = dram->pctl;
|
|
void __iomem *phy_base = dram->phy;
|
|
void __iomem *ddr_grf_base = dram->ddr_grf;
|
|
u32 grf_lp_con;
|
|
|
|
/*
|
|
* bit0: grf_upctl_axi_cg_en = 1 enable upctl2 axi clk auto gating
|
|
* bit1: grf_upctl_apb_cg_en = 1 ungated axi,core clk for apb access
|
|
* bit2: grf_upctl_core_cg_en = 1 enable upctl2 core clk auto gating
|
|
* bit3: grf_selfref_type2_en = 0 disable core clk gating when type2 sr
|
|
* bit4: grf_upctl_syscreq_cg_en = 1
|
|
* ungating coreclk when c_sysreq assert
|
|
* bit8-11: grf_auto_sr_dly = 6
|
|
*/
|
|
writel(0x1f1f0617, &dram->ddr_grf->ddr_grf_con[1]);
|
|
|
|
if (sdram_params->base.dramtype == DDR4)
|
|
grf_lp_con = (0x7 << 16) | (1 << 1);
|
|
else if (sdram_params->base.dramtype == DDR3)
|
|
grf_lp_con = (0x7 << 16) | (1 << 0);
|
|
else
|
|
grf_lp_con = (0x7 << 16) | (1 << 2);
|
|
|
|
/* en lpckdis_en */
|
|
grf_lp_con = grf_lp_con | (0x1 << (9 + 16)) | (0x1 << 9);
|
|
writel(grf_lp_con, ddr_grf_base + DDR_GRF_LP_CON);
|
|
|
|
/* off digit module clock when enter power down */
|
|
setbits_le32(PHY_REG(phy_base, 7), 1 << 7);
|
|
|
|
/* enable sr, pd */
|
|
if (PD_IDLE == 0)
|
|
clrbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 1));
|
|
else
|
|
setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 1));
|
|
if (SR_IDLE == 0)
|
|
clrbits_le32(pctl_base + DDR_PCTL2_PWRCTL, 1);
|
|
else
|
|
setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, 1);
|
|
setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 3));
|
|
}
|
|
|
|
/*
|
|
* pre_init: 0: pre init for dram cap detect
|
|
* 1: detect correct cap(except cs1 row)info, than reinit
|
|
* 2: after reinit, we detect cs1_row, if cs1_row not equal
|
|
* to cs0_row and cs is in middle on ddrconf map, we need
|
|
* to reinit dram, than set the correct ddrconf.
|
|
*/
|
|
static int sdram_init_(struct dram_info *dram,
|
|
struct px30_sdram_params *sdram_params, u32 pre_init)
|
|
{
|
|
struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info;
|
|
void __iomem *pctl_base = dram->pctl;
|
|
|
|
rkclk_ddr_reset(dram, 1, 1, 1, 1);
|
|
udelay(10);
|
|
/*
|
|
* dereset ddr phy psrstn to config pll,
|
|
* if using phy pll psrstn must be dereset
|
|
* before config pll
|
|
*/
|
|
rkclk_ddr_reset(dram, 1, 1, 1, 0);
|
|
rkclk_configure_ddr(dram, sdram_params);
|
|
|
|
/* release phy srst to provide clk to ctrl */
|
|
rkclk_ddr_reset(dram, 1, 1, 0, 0);
|
|
udelay(10);
|
|
phy_soft_reset(dram->phy);
|
|
/* release ctrl presetn, and config ctl registers */
|
|
rkclk_ddr_reset(dram, 1, 0, 0, 0);
|
|
pctl_cfg(dram->pctl, &sdram_params->pctl_regs, SR_IDLE, PD_IDLE);
|
|
cap_info->ddrconfig = calculate_ddrconfig(sdram_params);
|
|
set_ctl_address_map(dram, sdram_params);
|
|
phy_cfg(dram->phy, &sdram_params->phy_regs, sdram_params->skew,
|
|
&sdram_params->base, cap_info->bw);
|
|
|
|
/* enable dfi_init_start to init phy after ctl srstn deassert */
|
|
setbits_le32(pctl_base + DDR_PCTL2_DFIMISC, (1 << 5) | (1 << 4));
|
|
|
|
rkclk_ddr_reset(dram, 0, 0, 0, 0);
|
|
/* wait for dfi_init_done and dram init complete */
|
|
while ((readl(pctl_base + DDR_PCTL2_STAT) & 0x7) == 0)
|
|
continue;
|
|
|
|
if (sdram_params->base.dramtype == LPDDR3)
|
|
pctl_write_mr(dram->pctl, 3, 11, 3, LPDDR3);
|
|
|
|
/* do ddr gate training */
|
|
redo_cs0_training:
|
|
if (data_training(dram, 0, sdram_params->base.dramtype) != 0) {
|
|
if (pre_init != 0)
|
|
printascii("DTT cs0 error\n");
|
|
return -1;
|
|
}
|
|
if (check_rd_gate(dram)) {
|
|
printascii("re training cs0");
|
|
goto redo_cs0_training;
|
|
}
|
|
|
|
if (sdram_params->base.dramtype == LPDDR3) {
|
|
if ((read_mr(dram, 1, 8) & 0x3) != 0x3)
|
|
return -1;
|
|
} else if (sdram_params->base.dramtype == LPDDR2) {
|
|
if ((read_mr(dram, 1, 8) & 0x3) != 0x0)
|
|
return -1;
|
|
}
|
|
/* for px30: when 2cs, both 2 cs should be training */
|
|
if (pre_init != 0 && cap_info->rank == 2) {
|
|
redo_cs1_training:
|
|
if (data_training(dram, 1, sdram_params->base.dramtype) != 0) {
|
|
printascii("DTT cs1 error\n");
|
|
return -1;
|
|
}
|
|
if (check_rd_gate(dram)) {
|
|
printascii("re training cs1");
|
|
goto redo_cs1_training;
|
|
}
|
|
}
|
|
|
|
if (sdram_params->base.dramtype == DDR4)
|
|
pctl_write_vrefdq(dram->pctl, 0x3, 5670,
|
|
sdram_params->base.dramtype);
|
|
|
|
dram_all_config(dram, sdram_params);
|
|
enable_low_power(dram, sdram_params);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dram_detect_cap(struct dram_info *dram,
|
|
struct px30_sdram_params *sdram_params,
|
|
unsigned char channel)
|
|
{
|
|
struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info;
|
|
|
|
/*
|
|
* for ddr3: ddrconf = 3
|
|
* for ddr4: ddrconf = 12
|
|
* for lpddr3: ddrconf = 3
|
|
* default bw = 1
|
|
*/
|
|
u32 bk, bktmp;
|
|
u32 col, coltmp;
|
|
u32 rowtmp;
|
|
u32 cs;
|
|
u32 bw = 1;
|
|
u32 dram_type = sdram_params->base.dramtype;
|
|
|
|
if (dram_type != DDR4) {
|
|
/* detect col and bk for ddr3/lpddr3 */
|
|
coltmp = 12;
|
|
bktmp = 3;
|
|
if (dram_type == LPDDR2)
|
|
rowtmp = 15;
|
|
else
|
|
rowtmp = 16;
|
|
|
|
if (sdram_detect_col(cap_info, coltmp) != 0)
|
|
goto cap_err;
|
|
sdram_detect_bank(cap_info, coltmp, bktmp);
|
|
sdram_detect_dbw(cap_info, dram_type);
|
|
} else {
|
|
/* detect bg for ddr4 */
|
|
coltmp = 10;
|
|
bktmp = 4;
|
|
rowtmp = 17;
|
|
|
|
col = 10;
|
|
bk = 2;
|
|
cap_info->col = col;
|
|
cap_info->bk = bk;
|
|
sdram_detect_bg(cap_info, coltmp);
|
|
}
|
|
|
|
/* detect row */
|
|
if (sdram_detect_row(cap_info, coltmp, bktmp, rowtmp) != 0)
|
|
goto cap_err;
|
|
|
|
/* detect row_3_4 */
|
|
sdram_detect_row_3_4(cap_info, coltmp, bktmp);
|
|
|
|
/* bw and cs detect using data training */
|
|
if (data_training(dram, 1, dram_type) == 0)
|
|
cs = 1;
|
|
else
|
|
cs = 0;
|
|
cap_info->rank = cs + 1;
|
|
|
|
dram_set_bw(dram, 2);
|
|
if (data_training(dram, 0, dram_type) == 0)
|
|
bw = 2;
|
|
else
|
|
bw = 1;
|
|
cap_info->bw = bw;
|
|
|
|
cap_info->cs0_high16bit_row = cap_info->cs0_row;
|
|
if (cs) {
|
|
cap_info->cs1_row = cap_info->cs0_row;
|
|
cap_info->cs1_high16bit_row = cap_info->cs0_row;
|
|
} else {
|
|
cap_info->cs1_row = 0;
|
|
cap_info->cs1_high16bit_row = 0;
|
|
}
|
|
|
|
return 0;
|
|
cap_err:
|
|
return -1;
|
|
}
|
|
|
|
void get_ddr_param(struct px30_sdram_params *sdram_params,
|
|
struct ddr_param *ddr_param)
|
|
{
|
|
struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info;
|
|
u32 dram_type = sdram_params->base.dramtype;
|
|
u64 cs_cap[2];
|
|
|
|
cs_cap[0] = sdram_get_cs_cap(cap_info, 0, dram_type);
|
|
cs_cap[1] = sdram_get_cs_cap(cap_info, 1, dram_type);
|
|
|
|
if (cap_info->row_3_4) {
|
|
cs_cap[0] = cs_cap[0] * 3 / 4;
|
|
cs_cap[1] = cs_cap[1] * 3 / 4;
|
|
}
|
|
|
|
if (cap_info->row_3_4 && cap_info->rank == 2) {
|
|
ddr_param->count = 2;
|
|
ddr_param->para[0] = 0;
|
|
ddr_param->para[1] = cs_cap[0] * 4 / 3;
|
|
ddr_param->para[2] = cs_cap[0];
|
|
ddr_param->para[3] = cs_cap[1];
|
|
} else {
|
|
ddr_param->count = 1;
|
|
ddr_param->para[0] = 0;
|
|
ddr_param->para[1] = (u64)cs_cap[0] + (u64)cs_cap[1];
|
|
}
|
|
}
|
|
|
|
/* return: 0 = success, other = fail */
|
|
static int sdram_init_detect(struct dram_info *dram,
|
|
struct px30_sdram_params *sdram_params)
|
|
{
|
|
struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info;
|
|
u32 ret;
|
|
u32 sys_reg = 0;
|
|
u32 sys_reg3 = 0;
|
|
|
|
if (sdram_init_(dram, sdram_params, 0) != 0)
|
|
return -1;
|
|
|
|
if (dram_detect_cap(dram, sdram_params, 0) != 0)
|
|
return -1;
|
|
|
|
/* modify bw, cs related timing */
|
|
pctl_remodify_sdram_params(&sdram_params->pctl_regs, cap_info,
|
|
sdram_params->base.dramtype);
|
|
/* reinit sdram by real dram cap */
|
|
ret = sdram_init_(dram, sdram_params, 1);
|
|
if (ret != 0)
|
|
goto out;
|
|
|
|
/* redetect cs1 row */
|
|
sdram_detect_cs1_row(cap_info, sdram_params->base.dramtype);
|
|
if (cap_info->cs1_row) {
|
|
sys_reg = readl(&dram->pmugrf->os_reg[2]);
|
|
sys_reg3 = readl(&dram->pmugrf->os_reg[3]);
|
|
SYS_REG_ENC_CS1_ROW(cap_info->cs1_row,
|
|
sys_reg, sys_reg3, 0);
|
|
writel(sys_reg, &dram->pmugrf->os_reg[2]);
|
|
writel(sys_reg3, &dram->pmugrf->os_reg[3]);
|
|
}
|
|
|
|
ret = sdram_detect_high_row(cap_info, sdram_params->base.dramtype);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
struct px30_sdram_params
|
|
*get_default_sdram_config(void)
|
|
{
|
|
sdram_configs[0].skew = &skew;
|
|
|
|
return &sdram_configs[0];
|
|
}
|
|
|
|
/* return: 0 = success, other = fail */
|
|
int sdram_init(void)
|
|
{
|
|
struct px30_sdram_params *sdram_params;
|
|
int ret = 0;
|
|
struct ddr_param ddr_param;
|
|
|
|
dram_info.phy = (void *)DDR_PHY_BASE_ADDR;
|
|
dram_info.pctl = (void *)DDRC_BASE_ADDR;
|
|
dram_info.grf = (void *)GRF_BASE_ADDR;
|
|
dram_info.cru = (void *)CRU_BASE_ADDR;
|
|
dram_info.msch = (void *)SERVER_MSCH0_BASE_ADDR;
|
|
dram_info.ddr_grf = (void *)DDR_GRF_BASE_ADDR;
|
|
dram_info.pmugrf = (void *)PMUGRF_BASE_ADDR;
|
|
|
|
sdram_params = get_default_sdram_config();
|
|
ret = sdram_init_detect(&dram_info, sdram_params);
|
|
|
|
if (ret)
|
|
goto error;
|
|
|
|
get_ddr_param(sdram_params, &ddr_param);
|
|
rockchip_setup_ddr_param(&ddr_param);
|
|
sdram_print_ddr_info(&sdram_params->ch.cap_info,
|
|
&sdram_params->base, 0);
|
|
|
|
printascii("out\n");
|
|
return ret;
|
|
error:
|
|
return (-1);
|
|
}
|
|
#endif /* CONFIG_TPL_BUILD */
|