rk3588-game
/
android13
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
android13/kernel-5.10/drivers/input/sensors/angle/angle_lis3dh.c

343 lines
9.6 KiB
C
Executable File
Raw Blame History

/* drivers/input/sensors/access/kxtik.c
*
* Copyright (C) 2012-2015 ROCKCHIP.
* Author: luowei <lw@rock-chips.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/miscdevice.h>
#include <linux/gpio.h>
#include <linux/uaccess.h>
#include <asm/atomic.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/workqueue.h>
#include <linux/freezer.h>
#include <linux/of_gpio.h>
#ifdef CONFIG_HAS_EARLYSUSPEND
#include <linux/earlysuspend.h>
#endif
#include <linux/sensor-dev.h>
#define LIS3DH_INT_COUNT (0x0E)
#define LIS3DH_WHO_AM_I (0x0F)
/* full scale setting - register & mask */
#define LIS3DH_TEMP_CFG_REG (0x1F)
#define LIS3DH_CTRL_REG1 (0x20)
#define LIS3DH_CTRL_REG2 (0x21)
#define LIS3DH_CTRL_REG3 (0x22)
#define LIS3DH_CTRL_REG4 (0x23)
#define LIS3DH_CTRL_REG5 (0x24)
#define LIS3DH_CTRL_REG6 (0x25)
#define LIS3DH_REFERENCE (0x26)
#define LIS3DH_STATUS_REG (0x27)
#define LIS3DH_OUT_X_L (0x28)
#define LIS3DH_OUT_X_H (0x29)
#define LIS3DH_OUT_Y_L (0x2a)
#define LIS3DH_OUT_Y_H (0x2b)
#define LIS3DH_OUT_Z_L (0x2c)
#define LIS3DH_OUT_Z_H (0x2d)
#define LIS3DH_FIFO_CTRL_REG (0x2E)
#define LIS3DH_INT1_CFG (0x30)
#define LIS3DH_INT1_SRC (0x31)
#define LIS3DH_INT1_THS (0x32)
#define LIS3DH_INT1_DURATION (0x33)
#define LIS3DH_DEVID (0x33) //chip id
#define LIS3DH_ACC_DISABLE (0x08)
#define LIS3DH_RANGE 2000000
/* LIS3DH */
#define LIS3DH_PRECISION 16
#define LIS3DH_BOUNDARY (0x1 << (LIS3DH_PRECISION - 1))
#define LIS3DH_GRAVITY_STEP (LIS3DH_RANGE / LIS3DH_BOUNDARY)
#define ODR1 0x10 /* 1Hz output data rate */
#define ODR10 0x20 /* 10Hz output data rate */
#define ODR25 0x30 /* 25Hz output data rate */
#define ODR50 0x40 /* 50Hz output data rate */
#define ODR100 0x50 /* 100Hz output data rate */
#define ODR200 0x60 /* 200Hz output data rate */
#define ODR400 0x70 /* 400Hz output data rate */
#define ODR1250 0x90 /* 1250Hz output data rate */
struct sensor_reg_data {
char reg;
char data;
};
/****************operate according to sensor chip:start************/
static int sensor_active(struct i2c_client *client, int enable, int rate)
{
struct sensor_private_data *sensor =
(struct sensor_private_data *) i2c_get_clientdata(client);
int result = 0;
int status = 0;
sensor->ops->ctrl_data = sensor_read_reg(client, sensor->ops->ctrl_reg);
sensor->ops->ctrl_data |= ODR100; //100HZ,if 0 then power down
//register setting according to chip datasheet
if(!enable)
{
status = LIS3DH_ACC_DISABLE; //lis3dh
sensor->ops->ctrl_data |= status;
}
else
{
status = ~LIS3DH_ACC_DISABLE; //lis3dh
sensor->ops->ctrl_data &= status;
}
DBG("%s:reg=0x%x,reg_ctrl=0x%x,enable=%d\n",__func__,sensor->ops->ctrl_reg, sensor->ops->ctrl_data, enable);
result = sensor_write_reg(client, sensor->ops->ctrl_reg, sensor->ops->ctrl_data);
if(result)
printk("%s:fail to active sensor\n",__func__);
return result;
}
static int sensor_init(struct i2c_client *client)
{
struct sensor_private_data *sensor =
(struct sensor_private_data *) i2c_get_clientdata(client);
int result = 0;
int i;
struct sensor_reg_data reg_data[] =
{
{LIS3DH_CTRL_REG2,0X00},
{LIS3DH_CTRL_REG4,0x08}, //High resolution output mode: 1, Normal mode
{LIS3DH_CTRL_REG6,0x40},
{LIS3DH_TEMP_CFG_REG,0x00}, //
{LIS3DH_FIFO_CTRL_REG,0x00}, //
{LIS3DH_INT1_CFG,0xFF}, //6 direction position recognition
{LIS3DH_INT1_THS,0x7F}, //Interrupt 1 threshold
{LIS3DH_INT1_DURATION,0x7F}, //Duration value 0x00->ox7f
};
result = sensor->ops->active(client,0,0);
if(result)
{
printk("%s:line=%d,error\n",__func__,__LINE__);
return result;
}
sensor->status_cur = SENSOR_OFF;
for(i=0;i<(sizeof(reg_data)/sizeof(struct sensor_reg_data));i++)
{
result = sensor_write_reg(client, reg_data[i].reg, reg_data[i].data);
if(result)
{
printk("%s:line=%d,i=%d,error\n",__func__,__LINE__,i);
return result;
}
}
if(sensor->pdata->irq_enable)
{
result = sensor_write_reg(client, LIS3DH_CTRL_REG3, 0x40);//I1_AOI1 =1 if motion
if(result)
{
printk("%s:line=%d,error\n",__func__,__LINE__);
return result;
}
result = sensor_write_reg(client, LIS3DH_CTRL_REG5, 0x08);
if(result)
{
printk("%s:line=%d,error\n",__func__,__LINE__);
return result;
}
}
return result;
}
static int sensor_convert_data(struct i2c_client *client, char high_byte, char low_byte)
{
s64 result;
struct sensor_private_data *sensor =
(struct sensor_private_data *) i2c_get_clientdata(client);
/* int precision = sensor->ops->precision; */
switch (sensor->devid) {
case LIS3DH_DEVID:
result = ((int)high_byte << 8) | (int)low_byte;
if (result < LIS3DH_BOUNDARY)
result = result * LIS3DH_GRAVITY_STEP;
else
result = ~(((~result & (0x7fff >> (16 - LIS3DH_PRECISION))) + 1)
* LIS3DH_GRAVITY_STEP) + 1;
break;
default:
printk(KERN_ERR "%s: devid wasn't set correctly\n",__func__);
return -EFAULT;
}
return (int)result;
}
static int angle_report_value(struct i2c_client *client, struct sensor_axis *axis)
{
struct sensor_private_data *sensor =
(struct sensor_private_data *) i2c_get_clientdata(client);
/* Report acceleration sensor information */
input_report_abs(sensor->input_dev, ABS_X, axis->x);
input_report_abs(sensor->input_dev, ABS_Y, axis->y);
input_report_abs(sensor->input_dev, ABS_Z, axis->z);
input_sync(sensor->input_dev);
DBG("Gsensor x==%d y==%d z==%d\n",axis->x,axis->y,axis->z);
return 0;
}
#define GSENSOR_MIN 10
static int sensor_report_value(struct i2c_client *client)
{
struct sensor_private_data *sensor =
(struct sensor_private_data *) i2c_get_clientdata(client);
struct sensor_platform_data *pdata = sensor->pdata;
int ret = 0;
int x,y,z;
struct sensor_axis axis;
char buffer[6] = {0};
char value = 0;
if(sensor->ops->read_len < 6) //sensor->ops->read_len = 6
{
printk("%s:lenth is error,len=%d\n",__func__,sensor->ops->read_len);
return -1;
}
memset(buffer, 0, 6);
value = sensor_read_reg(client, LIS3DH_STATUS_REG);
if((value & 0x0f) == 0)
{
printk("%s:line=%d,value=0x%x,data is not ready\n",__func__,__LINE__,value);
return -1;
}
/* Data bytes from hardware xL, xH, yL, yH, zL, zH */
do {
*buffer = sensor->ops->read_reg;
ret = sensor_rx_data(client, buffer, sensor->ops->read_len);
if (ret < 0)
return ret;
} while (0);
//this angle need 6 bytes buffer
x = sensor_convert_data(sensor->client, buffer[1], buffer[0]); //buffer[1]:high bit
y = sensor_convert_data(sensor->client, buffer[3], buffer[2]);
z = sensor_convert_data(sensor->client, buffer[5], buffer[4]);
axis.x = (pdata->orientation[0])*x + (pdata->orientation[1])*y + (pdata->orientation[2])*z;
axis.y = (pdata->orientation[3])*x + (pdata->orientation[4])*y + (pdata->orientation[5])*z;
axis.z = (pdata->orientation[6])*x + (pdata->orientation[7])*y + (pdata->orientation[8])*z;
DBG( "%s: axis = %d %d %d \n", __func__, axis.x, axis.y, axis.z);
//Report event only while value is changed to save some power
if((abs(sensor->axis.x - axis.x) > GSENSOR_MIN) || (abs(sensor->axis.y - axis.y) > GSENSOR_MIN) || (abs(sensor->axis.z - axis.z) > GSENSOR_MIN))
{
angle_report_value(client, &axis);
/* <20><><EFBFBD><EFBFBD><EFBFBD>ػ<EFBFBD><D8BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>. */
mutex_lock(&(sensor->data_mutex) );
sensor->axis = axis;
mutex_unlock(&(sensor->data_mutex) );
}
if((sensor->pdata->irq_enable)&& (sensor->ops->int_status_reg >= 0)) //read sensor intterupt status register
{
value = sensor_read_reg(client, sensor->ops->int_status_reg);
DBG("%s:sensor int status :0x%x\n",__func__,value);
}
return ret;
}
static struct sensor_operate angle_lis3dh_ops = {
.name = "angle_lis3dh",
.type = SENSOR_TYPE_ANGLE, //sensor type and it should be correct
.id_i2c = ANGLE_ID_LIS3DH, //i2c id number
.read_reg = (LIS3DH_OUT_X_L | 0x80), //read data
.read_len = 6, //data length
.id_reg = LIS3DH_WHO_AM_I, //read device id from this register
.id_data = LIS3DH_DEVID, //device id
.precision = LIS3DH_PRECISION, //12 bits
.ctrl_reg = LIS3DH_CTRL_REG1, //enable or disable
.int_status_reg = LIS3DH_INT1_SRC, //intterupt status register
.range = {-LIS3DH_RANGE,LIS3DH_RANGE}, //range
.trig = (IRQF_TRIGGER_LOW|IRQF_ONESHOT),
.active = sensor_active,
.init = sensor_init,
.report = sensor_report_value,
};
/****************operate according to sensor chip:end************/
static int angle_lis3dh_probe(struct i2c_client *client,
const struct i2c_device_id *devid)
{
return sensor_register_device(client, NULL, devid, &angle_lis3dh_ops);
}
static int angle_lis3dh_remove(struct i2c_client *client)
{
return sensor_unregister_device(client, NULL, &angle_lis3dh_ops);
}
static const struct i2c_device_id angle_lis3dh_id[] = {
{"angle_lis3dh", ANGLE_ID_LIS3DH},
{}
};
static struct i2c_driver angle_lis3dh_driver = {
.probe = angle_lis3dh_probe,
.remove = angle_lis3dh_remove,
.shutdown = sensor_shutdown,
.id_table = angle_lis3dh_id,
.driver = {
.name = "angle_lis3dh",
#ifdef CONFIG_PM
.pm = &sensor_pm_ops,
#endif
},
};
module_i2c_driver(angle_lis3dh_driver);
MODULE_AUTHOR("luowei <lw@rock-chips.com>");
MODULE_DESCRIPTION("lis3dh angle driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink