android13/u-boot/arch/arm/dts/rv1126-u-boot.dtsi

/*
 * (C) Copyright 2020 Rockchip Electronics Co., Ltd
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

/ {
	aliases {
		mmc0 = &emmc;
		mmc1 = &sdmmc;
	};

	chosen {
		stdout-path = &uart2;
		u-boot,spl-boot-order = &sdmmc, &spi_nand, &spi_nor, &nandc, &emmc;
	};

	secure-otp@ff5d0000 {
		compatible = "rockchip,rv1126-secure-otp";
		reg = <0xff5d0000 0x4000>;
		secure_conf = <0xfe0a0008>;
		u-boot,dm-spl;
		status = "okay";
	};
};

&psci {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&uart2 {
	clock-frequency = <24000000>;
	u-boot,dm-spl;
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
};

&sdmmc {
	u-boot,dm-spl;
	pwr-en-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&sdmmc0 {
	u-boot,dm-spl;
};

&sdmmc0_bus4 {
	u-boot,dm-spl;
};

&sdmmc0_clk {
	u-boot,dm-spl;
};

&sdmmc0_cmd {
	u-boot,dm-spl;
};

&sdmmc0_det {
	u-boot,dm-spl;
};

&sdmmc0_idle_pins {
	u-boot,dm-spl;
};

&sdmmc1_idle_pins {
	u-boot,dm-spl;
};

&emmc {
	mmc-ecsd = <0x0020f000>;
	u-boot,dm-spl;
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
};

&pmu {
	u-boot,dm-spl;
};

&pmugrf {
	u-boot,dm-spl;
};

&pmucru {
	u-boot,dm-spl;
};

&cru {
	u-boot,dm-spl;
	/delete-property/ assigned-clocks;
	/delete-property/ assigned-clock-rates;
	/delete-property/ assigned-clock-parents;
};

&crypto {
	u-boot,dm-spl;
	status = "okay";
};

&grf {
	u-boot,dm-spl;
};

&saradc {
	u-boot,dm-spl;
	status = "okay";
};

&sfc {
	u-boot,dm-spl;
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
	/delete-property/ assigned-clocks;
	/delete-property/ assigned-clock-rates;
	status = "okay";

	#address-cells = <1>;
	#size-cells = <0>;
	spi_nand: flash@0 {
		u-boot,dm-spl;
		compatible = "spi-nand";
		reg = <0>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		spi-max-frequency = <96000000>;
	};

	spi_nor: flash@1 {
		u-boot,dm-spl;
		compatible = "jedec,spi-nor";
		label = "sfc_nor";
		reg = <0>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		spi-max-frequency = <100000000>;
	};
};

&nandc {
	u-boot,dm-spl;
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;

	nand@0 {
		u-boot,dm-spl;
		reg = <0>;
		nand-ecc-mode = "hw";
		nand-ecc-strength = <16>;
		nand-ecc-step-size = <1024>;
	};
};

&hw_decompress {
	u-boot,dm-spl;
	status = "okay";
};

&i2c0 {
	u-boot,dm-spl;
	status = "okay";
	rk817_fg@20 {
		u-boot,dm-spl;
		compatible = "rk817,battery";
		reg = <0x20>;
		bat_res_up = <140>;
		bat_res_down = <20>;
	};
};

&u2phy0 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&u2phy_otg {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&usbdrd {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&usbdrd_dwc3 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&pinctrl {
	u-boot,dm-spl;
	status = "okay";
};

&gpio0 {
	u-boot,dm-spl;
	status = "okay";
};

&gpio1 {
	u-boot,dm-spl;
	status = "okay";
};

&pcfg_pull_up_drv_level_2 {
	u-boot,dm-spl;
};

&pcfg_pull_none {
	u-boot,dm-spl;
};

&pcfg_pull_down{
	u-boot,dm-spl;
};

&pcfg_pull_up{
	u-boot,dm-spl;
};

&gpio3 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&gmac {
	u-boot,dm-pre-reloc;

	phy-mode = "rgmii";
	clock_in_out = "input";

	snps,reset-gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 20ms, 100ms for rtl8211f */
	snps,reset-delays-us = <0 20000 100000>;

	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_ETHERNET_OUT>;
	assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
	assigned-clock-rates = <125000000>, <0>, <25000000>;

	pinctrl-names = "default";
	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;

	tx_delay = <0x2a>;
	rx_delay = <0x1a>;

	phy-handle = <&phy>;
	status = "okay";
};

&mdio {
	u-boot,dm-pre-reloc;
	status = "okay";

	phy: phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		u-boot,dm-pre-reloc;
		reg = <0x0>;
		clocks = <&cru CLK_GMAC_ETHERNET_OUT>;
	};
};

&stmmac_axi_setup {
	u-boot,dm-pre-reloc;
	status = "okay";
	queue0 {
		u-boot,dm-pre-reloc;
	};
};

&mtl_rx_setup {
	u-boot,dm-pre-reloc;
	status = "okay";
	queue0 {
		u-boot,dm-pre-reloc;
	};
};

&mtl_tx_setup {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&gmac_clkin_m0 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&gmac_clkini_m1 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&rgmiim1_pins {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&rng {
	u-boot,dm-spl;
	status = "okay";
};

&clk_out_ethernetm1_pins{
	u-boot,dm-pre-reloc;
	status = "okay";
};

&pcfg_pull_none {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&pcfg_pull_none_drv_level_12 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&wdt {
	u-boot,dm-pre-reloc;
	status = "okay";
};