rk3588-game
/
android13
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
android13/packages/modules/Bluetooth/system/include/hardware/bluetooth.h

807 lines
28 KiB
C++
Raw Blame History

/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_INCLUDE_BLUETOOTH_H
#define ANDROID_INCLUDE_BLUETOOTH_H
#include <stdbool.h>
#include <stdint.h>
#include <sys/cdefs.h>
#include <sys/types.h>
#include "avrcp/avrcp.h"
#include "bluetooth/uuid.h"
#include "bt_transport.h"
#include "raw_address.h"
/**
* The Bluetooth Hardware Module ID
*/
#define BT_HARDWARE_MODULE_ID "bluetooth"
#define BT_STACK_MODULE_ID "bluetooth"
/** Bluetooth profile interface IDs */
#define BT_PROFILE_HANDSFREE_ID "handsfree"
#define BT_PROFILE_HANDSFREE_CLIENT_ID "handsfree_client"
#define BT_PROFILE_ADVANCED_AUDIO_ID "a2dp"
#define BT_PROFILE_ADVANCED_AUDIO_SINK_ID "a2dp_sink"
#define BT_PROFILE_SOCKETS_ID "socket"
#define BT_PROFILE_HIDHOST_ID "hidhost"
#define BT_PROFILE_HIDDEV_ID "hiddev"
#define BT_PROFILE_PAN_ID "pan"
#define BT_PROFILE_MAP_CLIENT_ID "map_client"
#define BT_PROFILE_SDP_CLIENT_ID "sdp"
#define BT_PROFILE_GATT_ID "gatt"
#define BT_PROFILE_AV_RC_ID "avrcp"
#define BT_PROFILE_AV_RC_CTRL_ID "avrcp_ctrl"
#define BT_PROFILE_HEARING_AID_ID "hearing_aid"
#define BT_PROFILE_HAP_CLIENT_ID "has_client"
#define BT_PROFILE_LE_AUDIO_ID "le_audio"
#define BT_KEYSTORE_ID "bluetooth_keystore"
#define BT_ACTIVITY_ATTRIBUTION_ID "activity_attribution"
#define BT_PROFILE_VC_ID "volume_control"
#define BT_PROFILE_CSIS_CLIENT_ID "csis_client"
#define BT_PROFILE_LE_AUDIO_ID "le_audio"
#define BT_PROFILE_LE_AUDIO_BROADCASTER_ID "le_audio_broadcaster"
/** Bluetooth Device Name */
typedef struct { uint8_t name[249]; } __attribute__((packed)) bt_bdname_t;
/** Bluetooth Adapter Visibility Modes*/
typedef enum {
BT_SCAN_MODE_NONE,
BT_SCAN_MODE_CONNECTABLE,
BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE
} bt_scan_mode_t;
/** Bluetooth Adapter State */
typedef enum { BT_STATE_OFF, BT_STATE_ON } bt_state_t;
/** Bluetooth Adapter Input Output Capabilities which determine Pairing/Security
*/
typedef enum {
BT_IO_CAP_OUT, /* DisplayOnly */
BT_IO_CAP_IO, /* DisplayYesNo */
BT_IO_CAP_IN, /* KeyboardOnly */
BT_IO_CAP_NONE, /* NoInputNoOutput */
BT_IO_CAP_KBDISP, /* Keyboard display */
BT_IO_CAP_MAX,
BT_IO_CAP_UNKNOWN = 0xFF /* Unknown value */
} bt_io_cap_t;
/** Bluetooth Error Status */
/** We need to build on this */
typedef enum {
BT_STATUS_SUCCESS = 0,
BT_STATUS_FAIL,
BT_STATUS_NOT_READY,
BT_STATUS_NOMEM,
BT_STATUS_BUSY,
BT_STATUS_DONE, /* request already completed */
BT_STATUS_UNSUPPORTED,
BT_STATUS_PARM_INVALID,
BT_STATUS_UNHANDLED,
BT_STATUS_AUTH_FAILURE,
BT_STATUS_RMT_DEV_DOWN,
BT_STATUS_AUTH_REJECTED,
BT_STATUS_JNI_ENVIRONMENT_ERROR,
BT_STATUS_JNI_THREAD_ATTACH_ERROR,
BT_STATUS_WAKELOCK_ERROR
} bt_status_t;
inline std::string bt_status_text(const bt_status_t& status) {
switch (status) {
case BT_STATUS_SUCCESS:
return std::string("success");
case BT_STATUS_FAIL:
return std::string("fail");
case BT_STATUS_NOT_READY:
return std::string("not_ready");
case BT_STATUS_NOMEM:
return std::string("no_memory");
case BT_STATUS_BUSY:
return std::string("busy");
case BT_STATUS_DONE:
return std::string("already_done");
case BT_STATUS_UNSUPPORTED:
return std::string("unsupported");
case BT_STATUS_PARM_INVALID:
return std::string("parameter_invalid");
case BT_STATUS_UNHANDLED:
return std::string("unhandled");
case BT_STATUS_AUTH_FAILURE:
return std::string("failure");
case BT_STATUS_RMT_DEV_DOWN:
return std::string("remote_device_down");
case BT_STATUS_AUTH_REJECTED:
return std::string("rejected");
case BT_STATUS_JNI_ENVIRONMENT_ERROR:
return std::string("jni_env_error");
case BT_STATUS_JNI_THREAD_ATTACH_ERROR:
return std::string("jni_thread_error");
case BT_STATUS_WAKELOCK_ERROR:
return std::string("wakelock_error");
default:
return std::string("UNKNOWN");
}
}
/** Bluetooth HCI Error Codes */
/** Corresponding to [Vol 2] Part D, "Error Codes" of Core_v5.1 specs */
typedef uint8_t bt_hci_error_code_t;
/** Bluetooth PinKey Code */
typedef struct { uint8_t pin[16]; } __attribute__((packed)) bt_pin_code_t;
typedef struct {
uint8_t status;
uint8_t ctrl_state; /* stack reported state */
uint64_t tx_time; /* in ms */
uint64_t rx_time; /* in ms */
uint64_t idle_time; /* in ms */
uint64_t energy_used; /* a product of mA, V and ms */
} __attribute__((packed)) bt_activity_energy_info;
typedef struct {
int32_t app_uid;
uint64_t tx_bytes;
uint64_t rx_bytes;
} __attribute__((packed)) bt_uid_traffic_t;
/** Bluetooth Adapter Discovery state */
typedef enum {
BT_DISCOVERY_STOPPED,
BT_DISCOVERY_STARTED
} bt_discovery_state_t;
/** Bluetooth ACL connection state */
typedef enum {
BT_ACL_STATE_CONNECTED,
BT_ACL_STATE_DISCONNECTED
} bt_acl_state_t;
/** Bluetooth SDP service record */
typedef struct {
bluetooth::Uuid uuid;
uint16_t channel;
char name[256]; // what's the maximum length
} bt_service_record_t;
/** Bluetooth Remote Version info */
typedef struct {
int version;
int sub_ver;
int manufacturer;
} bt_remote_version_t;
typedef struct {
uint16_t version_supported;
uint8_t local_privacy_enabled;
uint8_t max_adv_instance;
uint8_t rpa_offload_supported;
uint8_t max_irk_list_size;
uint8_t max_adv_filter_supported;
uint8_t activity_energy_info_supported;
uint16_t scan_result_storage_size;
uint16_t total_trackable_advertisers;
bool extended_scan_support;
bool debug_logging_supported;
bool le_2m_phy_supported;
bool le_coded_phy_supported;
bool le_extended_advertising_supported;
bool le_periodic_advertising_supported;
uint16_t le_maximum_advertising_data_length;
uint32_t dynamic_audio_buffer_supported;
bool le_periodic_advertising_sync_transfer_sender_supported;
bool le_connected_isochronous_stream_central_supported;
bool le_isochronous_broadcast_supported;
bool le_periodic_advertising_sync_transfer_recipient_supported;
} bt_local_le_features_t;
/* Stored the default/maximum/minimum buffer time for dynamic audio buffer.
* For A2DP offload usage, the unit is millisecond.
* For A2DP legacy usage, the unit is buffer queue size*/
typedef struct {
uint16_t default_buffer_time;
uint16_t maximum_buffer_time;
uint16_t minimum_buffer_time;
} bt_dynamic_audio_buffer_type_t;
typedef struct {
bt_dynamic_audio_buffer_type_t dab_item[32];
} bt_dynamic_audio_buffer_item_t;
/* Bluetooth Adapter and Remote Device property types */
typedef enum {
/* Properties common to both adapter and remote device */
/**
* Description - Bluetooth Device Name
* Access mode - Adapter name can be GET/SET. Remote device can be GET
* Data type - bt_bdname_t
*/
BT_PROPERTY_BDNAME = 0x1,
/**
* Description - Bluetooth Device Address
* Access mode - Only GET.
* Data type - RawAddress
*/
BT_PROPERTY_BDADDR,
/**
* Description - Bluetooth Service 128-bit UUIDs
* Access mode - Only GET.
* Data type - Array of bluetooth::Uuid (Array size inferred from property
* length).
*/
BT_PROPERTY_UUIDS,
/**
* Description - Bluetooth Class of Device as found in Assigned Numbers
* Access mode - Only GET.
* Data type - uint32_t.
*/
BT_PROPERTY_CLASS_OF_DEVICE,
/**
* Description - Device Type - BREDR, BLE or DUAL Mode
* Access mode - Only GET.
* Data type - bt_device_type_t
*/
BT_PROPERTY_TYPE_OF_DEVICE,
/**
* Description - Bluetooth Service Record
* Access mode - Only GET.
* Data type - bt_service_record_t
*/
BT_PROPERTY_SERVICE_RECORD,
/* Properties unique to adapter */
/**
* Description - Bluetooth Adapter scan mode
* Access mode - GET and SET
* Data type - bt_scan_mode_t.
*/
BT_PROPERTY_ADAPTER_SCAN_MODE,
/**
* Description - List of bonded devices
* Access mode - Only GET.
* Data type - Array of RawAddress of the bonded remote devices
* (Array size inferred from property length).
*/
BT_PROPERTY_ADAPTER_BONDED_DEVICES,
/**
* Description - Bluetooth Adapter Discoverable timeout (in seconds)
* Access mode - GET and SET
* Data type - uint32_t
*/
BT_PROPERTY_ADAPTER_DISCOVERABLE_TIMEOUT,
/* Properties unique to remote device */
/**
* Description - User defined friendly name of the remote device
* Access mode - GET and SET
* Data type - bt_bdname_t.
*/
BT_PROPERTY_REMOTE_FRIENDLY_NAME,
/**
* Description - RSSI value of the inquired remote device
* Access mode - Only GET.
* Data type - int8_t.
*/
BT_PROPERTY_REMOTE_RSSI,
/**
* Description - Remote version info
* Access mode - SET/GET.
* Data type - bt_remote_version_t.
*/
BT_PROPERTY_REMOTE_VERSION_INFO,
/**
* Description - Local LE features
* Access mode - GET.
* Data type - bt_local_le_features_t.
*/
BT_PROPERTY_LOCAL_LE_FEATURES,
/**
* Description - Local Input/Output Capabilities for classic Bluetooth
* Access mode - GET and SET
* Data Type - bt_io_cap_t.
*/
BT_PROPERTY_LOCAL_IO_CAPS,
/**
* Description - Local Input/Output Capabilities for BLE
* Access mode - GET and SET
* Data Type - bt_io_cap_t.
*/
BT_PROPERTY_LOCAL_IO_CAPS_BLE,
BT_PROPERTY_DYNAMIC_AUDIO_BUFFER,
/**
* Description - True if Remote is a Member of a Coordinated Set.
* Access mode - GET.
* Data Type - bool.
*/
BT_PROPERTY_REMOTE_IS_COORDINATED_SET_MEMBER,
BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP = 0xFF,
} bt_property_type_t;
/** Bluetooth Adapter Property data structure */
typedef struct {
bt_property_type_t type;
int len;
void* val;
} bt_property_t;
/** Represents the actual Out of Band data itself */
typedef struct bt_oob_data_s {
// Both
bool is_valid = false; /* Default to invalid data; force caller to verify */
uint8_t address[7]; /* Bluetooth Device Address (6) plus Address Type (1) */
uint8_t c[16]; /* Simple Pairing Hash C-192/256 (Classic or LE) */
uint8_t r[16]; /* Simple Pairing Randomizer R-192/256 (Classic or LE) */
uint8_t device_name[256]; /* Name of the device */
// Classic
uint8_t oob_data_length[2]; /* Classic only data Length. Value includes this
in length */
uint8_t class_of_device[2]; /* Class of Device (Classic or LE) */
// LE
uint8_t le_device_role; /* Supported and preferred role of device */
uint8_t sm_tk[16]; /* Security Manager TK Value (LE Only) */
uint8_t le_flags; /* LE Flags for discoverability and features */
uint8_t le_appearance[2]; /* For the appearance of the device */
} bt_oob_data_t;
/** Bluetooth Device Type */
typedef enum {
BT_DEVICE_DEVTYPE_BREDR = 0x1,
BT_DEVICE_DEVTYPE_BLE,
BT_DEVICE_DEVTYPE_DUAL
} bt_device_type_t;
/** Bluetooth Bond state */
typedef enum {
BT_BOND_STATE_NONE,
BT_BOND_STATE_BONDING,
BT_BOND_STATE_BONDED
} bt_bond_state_t;
/** Bluetooth SSP Bonding Variant */
typedef enum {
BT_SSP_VARIANT_PASSKEY_CONFIRMATION,
BT_SSP_VARIANT_PASSKEY_ENTRY,
BT_SSP_VARIANT_CONSENT,
BT_SSP_VARIANT_PASSKEY_NOTIFICATION
} bt_ssp_variant_t;
#define BT_MAX_NUM_UUIDS 32
/** Bluetooth Interface callbacks */
/** Bluetooth Enable/Disable Callback. */
typedef void (*adapter_state_changed_callback)(bt_state_t state);
/** GET/SET Adapter Properties callback */
/* TODO: For the GET/SET property APIs/callbacks, we may need a session
* identifier to associate the call with the callback. This would be needed
* whenever more than one simultaneous instance of the same adapter_type
* is get/set.
*
* If this is going to be handled in the Java framework, then we do not need
* to manage sessions here.
*/
typedef void (*adapter_properties_callback)(bt_status_t status,
int num_properties,
bt_property_t* properties);
/** GET/SET Remote Device Properties callback */
/** TODO: For remote device properties, do not see a need to get/set
* multiple properties - num_properties shall be 1
*/
typedef void (*remote_device_properties_callback)(bt_status_t status,
RawAddress* bd_addr,
int num_properties,
bt_property_t* properties);
/** New device discovered callback */
/** If EIR data is not present, then BD_NAME and RSSI shall be NULL and -1
* respectively */
typedef void (*device_found_callback)(int num_properties,
bt_property_t* properties);
/** Discovery state changed callback */
typedef void (*discovery_state_changed_callback)(bt_discovery_state_t state);
/** Bluetooth Legacy PinKey Request callback */
typedef void (*pin_request_callback)(RawAddress* remote_bd_addr,
bt_bdname_t* bd_name, uint32_t cod,
bool min_16_digit);
/** Bluetooth SSP Request callback - Just Works & Numeric Comparison*/
/** pass_key - Shall be 0 for BT_SSP_PAIRING_VARIANT_CONSENT &
* BT_SSP_PAIRING_PASSKEY_ENTRY */
/* TODO: Passkey request callback shall not be needed for devices with display
* capability. We still need support this in the stack for completeness */
typedef void (*ssp_request_callback)(RawAddress* remote_bd_addr,
bt_bdname_t* bd_name, uint32_t cod,
bt_ssp_variant_t pairing_variant,
uint32_t pass_key);
/** Bluetooth Bond state changed callback */
/* Invoked in response to create_bond, cancel_bond or remove_bond */
typedef void (*bond_state_changed_callback)(bt_status_t status,
RawAddress* remote_bd_addr,
bt_bond_state_t state,
int fail_reason);
/** Bluetooth Address consolidate callback */
/* Callback to inform upper layer that these two addresses come from same
* bluetooth device (DUAL mode) */
typedef void (*address_consolidate_callback)(RawAddress* main_bd_addr,
RawAddress* secondary_bd_addr);
/** Bluetooth LE Address association callback */
/* Callback for the upper layer to associate the LE-only device's RPA to the
* identity address */
typedef void (*le_address_associate_callback)(RawAddress* main_bd_addr,
RawAddress* secondary_bd_addr);
/** Bluetooth ACL connection state changed callback */
typedef void (*acl_state_changed_callback)(bt_status_t status,
RawAddress* remote_bd_addr,
bt_acl_state_t state,
int transport_link_type,
bt_hci_error_code_t hci_reason);
/** Bluetooth link quality report callback */
typedef void (*link_quality_report_callback)(
uint64_t timestamp, int report_id, int rssi, int snr,
int retransmission_count, int packets_not_receive_count,
int negative_acknowledgement_count);
/** Switch the buffer size callback */
typedef void (*switch_buffer_size_callback)(bool is_low_latency_buffer_size);
/** Switch the codec callback */
typedef void (*switch_codec_callback)(bool is_low_latency_buffer_size);
typedef enum { ASSOCIATE_JVM, DISASSOCIATE_JVM } bt_cb_thread_evt;
/** Thread Associate/Disassociate JVM Callback */
/* Callback that is invoked by the callback thread to allow upper layer to
* attach/detach to/from the JVM */
typedef void (*callback_thread_event)(bt_cb_thread_evt evt);
/** Bluetooth Test Mode Callback */
/* Receive any HCI event from controller. Must be in DUT Mode for this callback
* to be received */
typedef void (*dut_mode_recv_callback)(uint16_t opcode, uint8_t* buf,
uint8_t len);
/* LE Test mode callbacks
* This callback shall be invoked whenever the le_tx_test, le_rx_test or
* le_test_end is invoked The num_packets is valid only for le_test_end command
*/
typedef void (*le_test_mode_callback)(bt_status_t status, uint16_t num_packets);
/** Callback invoked when energy details are obtained */
/* Ctrl_state-Current controller state-Active-1,scan-2,or idle-3 state as
* defined by HCI spec. If the ctrl_state value is 0, it means the API call
* failed Time values-In milliseconds as returned by the controller Energy
* used-Value as returned by the controller Status-Provides the status of the
* read_energy_info API call uid_data provides an array of bt_uid_traffic_t,
* where the array is terminated by an element with app_uid set to -1.
*/
typedef void (*energy_info_callback)(bt_activity_energy_info* energy_info,
bt_uid_traffic_t* uid_data);
/** Callback invoked when OOB data is returned from the controller */
typedef void (*generate_local_oob_data_callback)(tBT_TRANSPORT transport,
bt_oob_data_t oob_data);
/** TODO: Add callbacks for Link Up/Down and other generic
* notifications/callbacks */
/** Bluetooth DM callback structure. */
typedef struct {
/** set to sizeof(bt_callbacks_t) */
size_t size;
adapter_state_changed_callback adapter_state_changed_cb;
adapter_properties_callback adapter_properties_cb;
remote_device_properties_callback remote_device_properties_cb;
device_found_callback device_found_cb;
discovery_state_changed_callback discovery_state_changed_cb;
pin_request_callback pin_request_cb;
ssp_request_callback ssp_request_cb;
bond_state_changed_callback bond_state_changed_cb;
address_consolidate_callback address_consolidate_cb;
le_address_associate_callback le_address_associate_cb;
acl_state_changed_callback acl_state_changed_cb;
callback_thread_event thread_evt_cb;
dut_mode_recv_callback dut_mode_recv_cb;
le_test_mode_callback le_test_mode_cb;
energy_info_callback energy_info_cb;
link_quality_report_callback link_quality_report_cb;
generate_local_oob_data_callback generate_local_oob_data_cb;
switch_buffer_size_callback switch_buffer_size_cb;
switch_codec_callback switch_codec_cb;
} bt_callbacks_t;
typedef void (*alarm_cb)(void* data);
typedef bool (*set_wake_alarm_callout)(uint64_t delay_millis, bool should_wake,
alarm_cb cb, void* data);
typedef int (*acquire_wake_lock_callout)(const char* lock_name);
typedef int (*release_wake_lock_callout)(const char* lock_name);
/** The set of functions required by bluedroid to set wake alarms and
* grab wake locks. This struct is passed into the stack through the
* |set_os_callouts| function on |bt_interface_t|.
*/
typedef struct {
/* set to sizeof(bt_os_callouts_t) */
size_t size;
set_wake_alarm_callout set_wake_alarm;
acquire_wake_lock_callout acquire_wake_lock;
release_wake_lock_callout release_wake_lock;
} bt_os_callouts_t;
/** NOTE: By default, no profiles are initialized at the time of init/enable.
* Whenever the application invokes the 'init' API of a profile, then one of
* the following shall occur:
*
* 1.) If Bluetooth is not enabled, then the Bluetooth core shall mark the
* profile as enabled. Subsequently, when the application invokes the
* Bluetooth 'enable', as part of the enable sequence the profile that
* were marked shall be enabled by calling appropriate stack APIs. The
* 'adapter_properties_cb' shall return the list of UUIDs of the
* enabled profiles.
*
* 2.) If Bluetooth is enabled, then the Bluetooth core shall invoke the
* stack profile API to initialize the profile and trigger a
* 'adapter_properties_cb' with the current list of UUIDs including the
* newly added profile's UUID.
*
* The reverse shall occur whenever the profile 'cleanup' APIs are invoked
*/
/** Represents the standard Bluetooth DM interface. */
typedef struct {
/** set to sizeof(bt_interface_t) */
size_t size;
/**
* Opens the interface and provides the callback routines
* to the implemenation of this interface.
* The |start_restricted| flag inits the adapter in restricted mode. In
* restricted mode, bonds that are created are marked as restricted in the
* config file. These devices are deleted upon leaving restricted mode.
* The |is_common_criteria_mode| flag inits the adapter in commom criteria
* mode. The |config_compare_result| flag show the config checksum check
* result if is in common criteria mode. The |init_flags| are config flags
* that cannot change during run. The |is_atv| flag indicates whether the
* local device is an Android TV
*/
int (*init)(bt_callbacks_t* callbacks, bool guest_mode,
bool is_common_criteria_mode, int config_compare_result,
const char** init_flags, bool is_atv,
const char* user_data_directory);
/** Enable Bluetooth. */
int (*enable)();
/** Disable Bluetooth. */
int (*disable)(void);
/** Closes the interface. */
void (*cleanup)(void);
/** Get all Bluetooth Adapter properties at init */
int (*get_adapter_properties)(void);
/** Get Bluetooth Adapter property of 'type' */
int (*get_adapter_property)(bt_property_type_t type);
/** Set Bluetooth Adapter property of 'type' */
/* Based on the type, val shall be one of
* RawAddress or bt_bdname_t or bt_scanmode_t etc
*/
int (*set_adapter_property)(const bt_property_t* property);
/** Get all Remote Device properties */
int (*get_remote_device_properties)(RawAddress* remote_addr);
/** Get Remote Device property of 'type' */
int (*get_remote_device_property)(RawAddress* remote_addr,
bt_property_type_t type);
/** Set Remote Device property of 'type' */
int (*set_remote_device_property)(RawAddress* remote_addr,
const bt_property_t* property);
/** Get Remote Device's service record for the given UUID */
int (*get_remote_service_record)(const RawAddress& remote_addr,
const bluetooth::Uuid& uuid);
/** Start service discovery with tranport to get remote services */
int (*get_remote_services)(RawAddress* remote_addr, int transport);
/** Start Discovery */
int (*start_discovery)(void);
/** Cancel Discovery */
int (*cancel_discovery)(void);
/** Create Bluetooth Bonding */
int (*create_bond)(const RawAddress* bd_addr, int transport);
/** Create Bluetooth Bond using out of band data */
int (*create_bond_out_of_band)(const RawAddress* bd_addr, int transport,
const bt_oob_data_t* p192_data,
const bt_oob_data_t* p256_data);
/** Remove Bond */
int (*remove_bond)(const RawAddress* bd_addr);
/** Cancel Bond */
int (*cancel_bond)(const RawAddress* bd_addr);
/**
* Get the connection status for a given remote device.
* return value of 0 means the device is not connected,
* non-zero return status indicates an active connection.
*/
int (*get_connection_state)(const RawAddress* bd_addr);
/** BT Legacy PinKey Reply */
/** If accept==FALSE, then pin_len and pin_code shall be 0x0 */
int (*pin_reply)(const RawAddress* bd_addr, uint8_t accept, uint8_t pin_len,
bt_pin_code_t* pin_code);
/** BT SSP Reply - Just Works, Numeric Comparison and Passkey
* passkey shall be zero for BT_SSP_VARIANT_PASSKEY_COMPARISON &
* BT_SSP_VARIANT_CONSENT
* For BT_SSP_VARIANT_PASSKEY_ENTRY, if accept==FALSE, then passkey
* shall be zero */
int (*ssp_reply)(const RawAddress* bd_addr, bt_ssp_variant_t variant,
uint8_t accept, uint32_t passkey);
/** Get Bluetooth profile interface */
const void* (*get_profile_interface)(const char* profile_id);
/** Bluetooth Test Mode APIs - Bluetooth must be enabled for these APIs */
/* Configure DUT Mode - Use this mode to enter/exit DUT mode */
int (*dut_mode_configure)(uint8_t enable);
/* Send any test HCI (vendor-specific) command to the controller. Must be in
* DUT Mode */
int (*dut_mode_send)(uint16_t opcode, uint8_t* buf, uint8_t len);
/** BLE Test Mode APIs */
/* opcode MUST be one of: LE_Receiver_Test, LE_Transmitter_Test, LE_Test_End
*/
int (*le_test_mode)(uint16_t opcode, uint8_t* buf, uint8_t len);
/** Sets the OS call-out functions that bluedroid needs for alarms and wake
* locks. This should be called immediately after a successful |init|.
*/
int (*set_os_callouts)(bt_os_callouts_t* callouts);
/** Read Energy info details - return value indicates BT_STATUS_SUCCESS or
* BT_STATUS_NOT_READY Success indicates that the VSC command was sent to
* controller
*/
int (*read_energy_info)();
/**
* Native support for dumpsys function
* Function is synchronous and |fd| is owned by caller.
* |arguments| are arguments which may affect the output, encoded as
* UTF-8 strings.
*/
void (*dump)(int fd, const char** arguments);
/**
* Native support for metrics protobuf dumping. The dumping format will be
* raw byte array
*
* @param output an externally allocated string to dump serialized protobuf
*/
void (*dumpMetrics)(std::string* output);
/**
* Clear /data/misc/bt_config.conf and erase all stored connections
*/
int (*config_clear)(void);
/**
* Clear (reset) the dynamic portion of the device interoperability database.
*/
void (*interop_database_clear)(void);
/**
* Add a new device interoperability workaround for a remote device whose
* first |len| bytes of the its device address match |addr|.
* NOTE: |feature| has to match an item defined in interop_feature_t
* (interop.h).
*/
void (*interop_database_add)(uint16_t feature, const RawAddress* addr,
size_t len);
/**
* Get the AvrcpTarget Service interface to interact with the Avrcp Service
*/
bluetooth::avrcp::ServiceInterface* (*get_avrcp_service)(void);
/**
* Obfuscate Bluetooth MAC address into a PII free ID string
*
* @param address Bluetooth MAC address to be obfuscated
* @return a string of uint8_t that is unique to this MAC address
*/
std::string (*obfuscate_address)(const RawAddress& address);
/**
* Get an incremental id for as primary key for Bluetooth metric and log
*
* @param address Bluetooth MAC address of Bluetooth device
* @return int incremental Bluetooth id
*/
int (*get_metric_id)(const RawAddress& address);
/**
* Set the dynamic audio buffer size to the Controller
*/
int (*set_dynamic_audio_buffer_size)(int codec, int size);
/**
* Fetches the local Out of Band data.
*/
int (*generate_local_oob_data)(tBT_TRANSPORT transport);
/**
* Allow or disallow audio low latency
*
* @param allowed true if allowing audio low latency
* @param address Bluetooth MAC address of Bluetooth device
* @return true if audio low latency is successfully allowed or disallowed
*/
bool (*allow_low_latency_audio)(bool allowed, const RawAddress& address);
/**
* Set the event filter for the controller
*/
int (*clear_event_filter)();
/**
* Data passed from BluetoothDevice.metadata_changed
*
* @param remote_bd_addr remote address
* @param key Metadata key
* @param value Metadata value
*/
void (*metadata_changed)(const RawAddress& remote_bd_addr, int key,
std::vector<uint8_t> value);
} bt_interface_t;
#define BLUETOOTH_INTERFACE_STRING "bluetoothInterface"
#endif /* ANDROID_INCLUDE_BLUETOOTH_H */
Reference in New Issue View Git Blame Copy Permalink