android13/kernel-5.10/arch/arm64/boot/dts/rockchip/rk1808-evb-x4.dts

272 lines
4.6 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
*/
/dts-v1/;
#include <dt-bindings/display/drm_mipi_dsi.h>
#include "rk1808-evb.dtsi"
/ {
model = "Rockchip RK1808 EVB X4 Board";
compatible = "rockchip,rk1808-evb-x4", "rockchip,rk1808";
chosen {
bootargs = "earlycon=uart8250,mmio32,0xff550000 console=ttyFIQ0 dump_initrd init=/init kpti=0";
};
};
&adc_key {
power-key {
linux,code = <KEY_POWER>;
label = "power key";
press-threshold-microvolt = <18000>;
};
};
/delete-node/ &backlight;
/delete-node/ &vcc1v8_dvp;
/delete-node/ &vdd1v5_dvp;
/delete-node/ &vcc2v8_dvp;
&cif {
status = "okay";
port {
cif_in: endpoint@0 {
remote-endpoint = <&dphy_rx_out>;
data-lanes = <1 2 3 4>;
};
};
};
&cif_mmu {
status = "okay";
};
&cru {
assigned-clocks =
<&cru PLL_GPLL>, <&cru PLL_CPLL>,
<&cru PLL_PPLL>, <&cru ARMCLK>,
<&cru MSCLK_PERI>, <&cru LSCLK_PERI>,
<&cru HSCLK_BUS_PRE>, <&cru MSCLK_BUS_PRE>,
<&cru LSCLK_BUS_PRE>, <&cru DCLK_VOPRAW>;
assigned-clock-rates =
<1188000000>, <1000000000>,
<100000000>, <816000000>,
<200000000>, <100000000>,
<300000000>, <200000000>,
<100000000>, <80000000>;
};
&csi_tx {
status = "okay";
panel@0 {
compatible = "simple-panel-dsi";
reg = <0>;
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET |
MIPI_DSI_CLOCK_NON_CONTINUOUS)>;
dsi,format = <MIPI_CSI_FMT_RAW8>;
dsi,lanes = <4>;
display-timings {
native-mode = <&timing_1280x3_720>;
timing_1280x3_720: timing-1280x3-720 {
clock-frequency = <80000000>;
hactive = <3840>;
vactive = <720>;
hfront-porch = <1200>;
hsync-len = <500>;
hback-porch = <30>;
vfront-porch = <40>;
vsync-len = <20>;
vback-porch = <40>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
timing_4k: timing-4k {
clock-frequency = <250000000>;
hactive = <3840>;
vactive = <2160>;
hfront-porch = <1500>;
hsync-len = <500>;
hback-porch = <30>;
vfront-porch = <40>;
vsync-len = <20>;
vback-porch = <40>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
timing_4096: timing-4096 {
clock-frequency = <190000000>;
hactive = <4096>;
vactive = <2048>;
hfront-porch = <1500>;
hsync-len = <500>;
hback-porch = <30>;
vfront-porch = <40>;
vsync-len = <20>;
vback-porch = <40>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
timing_1920x3_1080: timing-1920x3-1080 {
clock-frequency = <250000000>;
hactive = <5760>;
vactive = <1080>;
hfront-porch = <1500>;
hsync-len = <70>;
hback-porch = <30>;
vfront-porch = <40>;
vsync-len = <20>;
vback-porch = <40>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
};
};
&display_subsystem {
status = "okay";
};
&emmc {
status = "disabled";
};
&gmac {
status = "disabled";
};
&i2c0 {
status = "okay";
vcamera@30 {
compatible = "rockchip,virtual-camera";
reg = <0x30>;
width = <1280>;
height = <720>;
bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
port {
vcamera_out: endpoint {
remote-endpoint = <&dphy_rx_in>;
link-frequencies = /bits/ 64 <320000000>;
};
};
};
};
&i2c1 {
status = "disabled";
};
&i2c4 {
status = "disabled";
};
&mipi_dphy {
status = "okay";
};
&mipi_dphy_rx {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
dphy_rx_in: endpoint@1 {
reg = <1>;
remote-endpoint = <&vcamera_out>;
data-lanes = <1 2 3 4>;
};
};
port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
dphy_rx_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&cif_in>;
};
};
};
};
&rk809_codec {
status = "disabled";
};
&rk_rga {
status = "okay";
};
&route_csi {
status = "disabled";
};
&sdmmc {
status = "disabled";
};
&sdio {
status = "disabled";
};
&sfc {
status = "okay";
};
&uart4 {
status = "disabled";
};
&wireless_bluetooth {
status = "disabled";
};
&wireless_wlan {
status = "disabled";
};
&tsadc {
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
pinctrl-names = "init", "default";
pinctrl-0 = <&tsadc_otp_gpio>;
pinctrl-1 = <&tsadc_otp_out>;
status = "okay";
};
&vop_raw {
status = "okay";
};
&vopr_mmu {
status = "okay";
};
&vpu_mmu {
status = "okay";
};