956 lines
20 KiB
Plaintext
956 lines
20 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/input/rk-input.h>
|
|
#include <dt-bindings/sensor-dev.h>
|
|
#include <dt-bindings/display/drm_mipi_dsi.h>
|
|
#include "rk3566.dtsi"
|
|
#include "rk3568-android.dtsi"
|
|
#include "rk3566-eink.dtsi"
|
|
|
|
/ {
|
|
model = "Rockchip RK3566 RK817 EINK LP4X Board";
|
|
compatible = "rockchip,rk3566-rk817-eink", "rockchip,rk3566";
|
|
|
|
charge-animation {
|
|
compatible = "rockchip,uboot-charge";
|
|
rockchip,uboot-charge-on = <1>;
|
|
rockchip,android-charge-on = <0>;
|
|
rockchip,uboot-low-power-voltage = <3350>;
|
|
rockchip,screen-on-voltage = <3400>;
|
|
rockchip,auto-wakeup-interval = <60>;
|
|
status = "okay";
|
|
};
|
|
|
|
adc_keys: adc-keys {
|
|
status = "disabled";
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 0>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
vol-up-key {
|
|
label = "volume up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
press-threshold-microvolt = <1750>;
|
|
};
|
|
|
|
vol-down-key {
|
|
label = "volume down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
press-threshold-microvolt = <297500>;
|
|
};
|
|
};
|
|
|
|
hdmi_sound: hdmi-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <128>;
|
|
simple-audio-card,name = "rockchip,hdmi";
|
|
status = "disabled";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0_8ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&hdmi>;
|
|
};
|
|
};
|
|
|
|
vccsys: vccsys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v8_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3800000>;
|
|
regulator-max-microvolt = <3800000>;
|
|
};
|
|
|
|
rk817-sound {
|
|
compatible = "rockchip,multicodecs-card";
|
|
rockchip,card-name = "rockchip-rk817";
|
|
hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
rockchip,format = "i2s";
|
|
rockchip,mclk-fs = <256>;
|
|
rockchip,cpu = <&i2s1_8ch>;
|
|
rockchip,codec = <&rk817_codec>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_det>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
status = "disabled";
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk817 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
post-power-on-delay-ms = <200>;
|
|
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
vcc_sd: vcc-sd {
|
|
compatible = "regulator-gpio";
|
|
enable-active-low;
|
|
enable-gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc_sd_h>;
|
|
regulator-name = "vcc_sd";
|
|
states = <3300000 0x0
|
|
3300000 0x1>;
|
|
};
|
|
|
|
wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
rockchip,grf = <&grf>;
|
|
wifi_chip_type = "ap6255";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake_irq>;
|
|
WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&rk817 1>;
|
|
clock-names = "ext_clock";
|
|
//wifi-bt-power-toggle;
|
|
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart1m0_rtsn>;
|
|
pinctrl-1 = <&uart1_gpios>;
|
|
BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&ebc {
|
|
/* clock rate 1000M/n, (n=1~32) */
|
|
assigned-clocks = <&cru CPLL_333M>, <&cru DCLK_EBC>;
|
|
assigned-clock-rates = <250000000>, <250000000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ebc_dev {
|
|
pmic = <&tps65185>;
|
|
status = "okay";
|
|
#if 0
|
|
/* ED097TC2U1 */
|
|
panel,width = <1200>;
|
|
panel,height = <825>;
|
|
panel,vir_width = <1200>;
|
|
panel,vir_height = <825>;
|
|
panel,sdck = <25000000>;
|
|
panel,lsl = <4>;
|
|
panel,lbl = <4>;
|
|
panel,ldl = <300>;
|
|
panel,lel = <36>;
|
|
panel,gdck-sta = <18>;
|
|
panel,lgonl = <265>;
|
|
panel,fsl = <2>;
|
|
panel,fbl = <4>;
|
|
panel,fdl = <825>;
|
|
panel,fel = <24>;
|
|
panel,mirror = <0>;
|
|
panel,panel_16bit = <0>;
|
|
panel,panel_color = <0>;
|
|
panel,width-mm = <203>;
|
|
panel,height-mm = <140>;
|
|
#else
|
|
/* ES103TC1 */
|
|
panel,width = <1872>;
|
|
panel,height = <1404>;
|
|
panel,vir_width = <1872>;
|
|
panel,vir_height = <1404>;
|
|
panel,sdck = <33300000>;
|
|
panel,lsl = <18>;
|
|
panel,lbl = <17>;
|
|
panel,ldl = <234>;
|
|
panel,lel = <7>;
|
|
panel,gdck-sta = <34>;
|
|
panel,lgonl = <192>;
|
|
panel,fsl = <1>;
|
|
panel,fbl = <4>;
|
|
panel,fdl = <1404>;
|
|
panel,fel = <12>;
|
|
panel,mirror = <0>;
|
|
panel,panel_16bit = <1>;
|
|
panel,panel_color = <0>;
|
|
panel,width-mm = <157>;
|
|
panel,height-mm = <210>;
|
|
#endif
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi_in_vp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
vdd_cpu: tcs4525@1c {
|
|
compatible = "tcs,tcs4525";
|
|
reg = <0x1c>;
|
|
vin-supply = <&vccsys>;
|
|
regulator-compatible = "fan53555-reg";
|
|
regulator-name = "vdd_cpu";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1390000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <2300>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
rk817: pmic@20 {
|
|
compatible = "rockchip,rk817";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default", "pmic-sleep",
|
|
"pmic-power-off", "pmic-reset";
|
|
pinctrl-0 = <&pmic_int>;
|
|
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
|
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
|
pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
|
//fb-inner-reg-idxs = <2>;
|
|
/* 1: rst regs (default in codes), 0: rst the pmic */
|
|
pmic-reset-func = <0>;
|
|
/* not save the PMIC_POWER_EN register in uboot */
|
|
not-save-power-en = <1>;
|
|
vcc1-supply = <&vccsys>;
|
|
vcc2-supply = <&vccsys>;
|
|
vcc3-supply = <&vccsys>;
|
|
vcc4-supply = <&vccsys>;
|
|
vcc5-supply = <&vccsys>;
|
|
vcc6-supply = <&vccsys>;
|
|
vcc7-supply = <&vccsys>;
|
|
vcc8-supply = <&vccsys>;
|
|
vcc9-supply = <&dcdc_boost>;
|
|
|
|
pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
pinctrl_rk8xx: pinctrl_rk8xx {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
rk817_slppin_null: rk817_slppin_null {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk817_slppin_slp: rk817_slppin_slp {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk817_slppin_rst: rk817_slppin_rst {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun3";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vdd_logic";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vcc_ddr";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3: DCDC_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vcc_3v3";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pmu: LDO_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdda_0v9: LDO_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vdda_0v9";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v9_pmu: LDO_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vdda0v9_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vccio_acodec: LDO_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_acodec";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_pmu: LDO_REG6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc3v3_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: LDO_REG7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc1v8_dvp: LDO_REG8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc1v8_dvp";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc2v8_dvp: LDO_REG9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "vcc2v8_dvp";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
dcdc_boost: BOOST {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <4700000>;
|
|
regulator-max-microvolt = <5400000>;
|
|
regulator-name = "boost";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
otg_switch: OTG_SWITCH {
|
|
regulator-name = "otg_switch";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
battery {
|
|
compatible = "rk817,battery";
|
|
ocv_table = <3400 3513 3578 3687 3734 3752 3763
|
|
3766 3771 3784 3804 3836 3885 3925
|
|
3962 4005 4063 4114 4169 4227 4303>;
|
|
design_capacity = <5000>;
|
|
design_qmax = <5500>;
|
|
bat_res = <100>;
|
|
sleep_enter_current = <150>;
|
|
sleep_exit_current = <180>;
|
|
sleep_filter_current = <100>;
|
|
power_off_thresd = <3450>;
|
|
zero_algorithm_vol = <3850>;
|
|
max_soc_offset = <60>;
|
|
monitor_sec = <5>;
|
|
sample_res = <10>;
|
|
virtual_power = <0>;
|
|
};
|
|
|
|
charger {
|
|
compatible = "rk817,charger";
|
|
min_input_voltage = <4500>;
|
|
max_input_current = <1500>;
|
|
max_chrg_current = <2000>;
|
|
max_chrg_voltage = <4300>;
|
|
chrg_term_mode = <0>;
|
|
chrg_finish_cur = <300>;
|
|
virtual_power = <0>;
|
|
dc_det_adc = <0>;
|
|
extcon = <&usb2phy0>;
|
|
gate_function_disable = <1>;
|
|
};
|
|
|
|
rk817_codec: codec {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "rockchip,rk817-codec";
|
|
clocks = <&cru I2S1_MCLKOUT>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>;
|
|
assigned-clock-rates = <12288000>;
|
|
assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1m0_mclk>;
|
|
hp-volume = <20>;
|
|
spk-volume = <3>;
|
|
out-l2spk-r2hp;
|
|
spk-ctl-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
tps65185: tps65185@68 {
|
|
status = "okay";
|
|
compatible = "ti,tps65185";
|
|
reg = <0x68>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tps65185_gpio>;
|
|
int-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
wakeup-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
vcomctl-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
powerup-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
wacom: wacom@9 {
|
|
compatible = "wacom,w9013";
|
|
reg = <0x09>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wacom_gpio>;
|
|
gpio_detect = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
gpio_intr = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
|
|
gpio_rst = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
revert_x = <0>;
|
|
revert_y = <0>;
|
|
xy_exchange = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3m1_xfer>;
|
|
|
|
ts@40 {
|
|
compatible = "gslX680-pad";
|
|
reg = <0x40>;
|
|
touch-gpio = <&gpio3 RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
|
|
reset-gpio = <&gpio3 RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tp_gpio>;
|
|
screen_max_x = <1200>;
|
|
screen_max_y = <1920>;
|
|
revert_x = <0>;
|
|
revert_y = <1>;
|
|
revert_xy = <0>;
|
|
chip_id = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tsc@24 {
|
|
status = "okay";
|
|
compatible = "cy,cyttsp5_i2c_adapter";
|
|
reg = <0x24>;
|
|
cy,adapter_id = "cyttsp5_i2c_adapter";
|
|
//cytp-supply = <&vcc_sd>;
|
|
cy,core {
|
|
cy,name = "cyttsp5_core";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tsc_gpio>;
|
|
cy,irq_gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
cy,rst_gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
cy,1v8_gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
cy,2v8_gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
cy,hid_desc_register = <1>;
|
|
/* CY_CORE_FLAG_RESTORE_PARAMETERS */
|
|
cy,flags = <6>;
|
|
/* CY_CORE_EWG_NONE */
|
|
cy,easy_wakeup_gesture = <0>;
|
|
cy,btn_keys = <172 /* KEY_HOMEPAGE */
|
|
/* previously was KEY_HOME, new Android versions use KEY_HOMEPAGE */
|
|
139 /* KEY_MENU */
|
|
158 /* KEY_BACK */
|
|
217 /* KEY_SEARCH */
|
|
114 /* KEY_VOLUMEDOWN */
|
|
115 /* KEY_VOLUMEUP */
|
|
212 /* KEY_CAMERA */
|
|
116>; /* KEY_POWER */
|
|
cy,btn_keys-tag = <0>;
|
|
cy,mt {
|
|
cy,name = "cyttsp5_mt";
|
|
cy,inp_dev_name = "cyttsp5_mt";
|
|
cy,flags = <0>;
|
|
cy,abs =
|
|
/* ABS_MT_POSITION_X, CY_ABS_MIN_X, CY_ABS_MAX_X, 0, 0 */
|
|
<0x35 0 1872 0 0
|
|
/* ABS_MT_POSITION_Y, CY_ABS_MIN_Y, CY_ABS_MAX_Y, 0, 0 */
|
|
0x36 0 1404 0 0
|
|
/* ABS_MT_PRESSURE, CY_ABS_MIN_P, CY_ABS_MAX_P, 0, 0 */
|
|
0x3a 0 255 0 0
|
|
/* CY_IGNORE_VALUE, CY_ABS_MIN_W, CY_ABS_MAX_W, 0, 0 */
|
|
0xffff 0 255 0 0
|
|
/* ABS_MT_TRACKING_ID, CY_ABS_MIN_T, CY_ABS_MAX_T, 0, 0 */
|
|
0x39 0 15 0 0
|
|
/* ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0 */
|
|
0x30 0 255 0 0
|
|
/* ABS_MT_TOUCH_MINOR, 0, 255, 0, 0 */
|
|
0x31 0 255 0 0
|
|
/* ABS_MT_ORIENTATION, -127, 127, 0, 0 */
|
|
0x34 0xffffff81 127 0 0
|
|
/* ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0 */
|
|
0x37 0 1 0 0
|
|
/* ABS_DISTANCE, 0, 255, 0, 0 */
|
|
0x19 0 255 0 0>;
|
|
|
|
cy,vkeys_x = <1872>;
|
|
cy,vkeys_y = <1404>;
|
|
cy,revert_x = <0>;
|
|
cy,revert_y = <1>;
|
|
cy,xy_exchange = <0>;
|
|
|
|
cy,virtual_keys =
|
|
/* KeyCode CenterX CenterY Width Height */
|
|
/* KEY_BACK */
|
|
<158 1360 90 160 180
|
|
/* KEY_MENU */
|
|
139 1360 270 160 180
|
|
/* KEY_HOMEPAGE */
|
|
172 1360 450 160 180
|
|
/* KEY SEARCH */
|
|
217 1360 630 160 180>;
|
|
};
|
|
|
|
cy,btn {
|
|
cy,name = "cyttsp5_btn";
|
|
cy,inp_dev_name = "cyttsp5_btn";
|
|
};
|
|
|
|
cy,proximity {
|
|
cy,name = "cyttsp5_proximity";
|
|
cy,inp_dev_name = "cyttsp5_proximity";
|
|
cy,abs =
|
|
/* ABS_DISTANCE, CY_PROXIMITY_MIN_VAL, CY_PROXIMITY_MAX_VAL, 0, 0 */
|
|
<0x19 0 1 0 0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "disabled";
|
|
|
|
kxtj: kxtj3@e {
|
|
status = "disabled";
|
|
compatible = "gs_kxtj9";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&kxtj3_irq_gpio>;
|
|
reg = <0x0e>;
|
|
irq-gpio = <&gpio4 RK_PC6 IRQ_TYPE_EDGE_RISING>;
|
|
type = <SENSOR_TYPE_ACCEL>;
|
|
irq_enable = <0>;
|
|
poll_delay_ms = <30>;
|
|
power-off-in-suspend = <1>;
|
|
layout = <5>;
|
|
};
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2s1_8ch {
|
|
status = "okay";
|
|
rockchip,clk-trcm = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1m0_sclktx
|
|
&i2s1m0_lrcktx
|
|
&i2s1m0_sdi0
|
|
&i2s1m0_sdo0>;
|
|
};
|
|
|
|
&jpegd {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&video_phy0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mpp_srv {
|
|
status = "okay";
|
|
};
|
|
|
|
&nandc0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pinctrl {
|
|
wacom {
|
|
wacom_gpio: wacom-gpio {
|
|
rockchip,pins =
|
|
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
tsc {
|
|
tsc_gpio: tsc-gpio {
|
|
rockchip,pins =
|
|
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
tps_pmic {
|
|
tps65185_gpio: tps65185-gpio {
|
|
rockchip,pins =
|
|
<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
tp {
|
|
tp_gpio: tp-gpio {
|
|
rockchip,pins =
|
|
<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
headphone {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
sensor {
|
|
kxtj3_irq_gpio: kxtj3-irq-gpio {
|
|
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int: pmic_int {
|
|
rockchip,pins =
|
|
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
soc_slppin_gpio: soc_slppin_gpio {
|
|
rockchip,pins =
|
|
<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
|
|
soc_slppin_slp: soc_slppin_slp {
|
|
rockchip,pins =
|
|
<0 RK_PA2 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
soc_slppin_rst: soc_slppin_rst {
|
|
rockchip,pins =
|
|
<0 RK_PA2 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
vcc_sd {
|
|
vcc_sd_h: vcc-sd-h {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
|
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart1_gpios: uart1-gpios {
|
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
status = "okay";
|
|
pmuio1-supply = <&vcc3v3_pmu>;
|
|
pmuio2-supply = <&vcc3v3_pmu>;
|
|
vccio1-supply = <&vccio_acodec>;
|
|
vccio3-supply = <&vccio_sd>;
|
|
vccio4-supply = <&vcc_3v3>;
|
|
vccio5-supply = <&vcc_3v3>;
|
|
vccio6-supply = <&vcc_3v3>;
|
|
vccio7-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
&pwm4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&rk_rga {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
status = "disabled";
|
|
vref-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
keep-power-in-suspend;
|
|
max-frequency = <200000000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc0 {
|
|
max-frequency = <50000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1 {
|
|
max-frequency = <150000000>;
|
|
no-sd;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
|
sd-uhs-sdr104;
|
|
status = "disabled";
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "disabled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd30 {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|