496 lines
9.4 KiB
Plaintext
496 lines
9.4 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
#include "dt-bindings/usb/pd.h"
|
|
#include "rk3588.dtsi"
|
|
#include "rk3588-evb.dtsi"
|
|
#include "rk3588-rk806-single.dtsi"
|
|
|
|
/ {
|
|
fan: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
#cooling-cells = <2>;
|
|
pwms = <&pwm14 0 50000 0>;
|
|
cooling-levels = <0 50 100 150 200 255>;
|
|
rockchip,temp-trips = <
|
|
50000 1
|
|
55000 2
|
|
60000 3
|
|
65000 4
|
|
70000 5
|
|
>;
|
|
};
|
|
|
|
pcie30_avdd1v8: pcie30-avdd1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd1v8";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&avcc_1v8_s0>;
|
|
};
|
|
|
|
pcie30_avdd0v75: pcie30-avdd0v75 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd0v75";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
vin-supply = <&avdd_0v75_s0>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
dma_trans: dma-trans@3c000000 {
|
|
reg = <0x0 0x3c000000 0x0 0x04000000>;
|
|
};
|
|
};
|
|
|
|
vbus5v0_typec: vbus5v0-typec {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbus5v0_typec";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&typec5v_pwren>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc3v3_au5426: vcc3v3-au5426 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_au5426";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc3v3_lcd_n: vcc3v3-lcd0-n {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_lcd0_n";
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc_1v8_s3>;
|
|
};
|
|
|
|
vcc5v0_host: vcc5v0-host {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
};
|
|
};
|
|
|
|
&backlight {
|
|
pwms = <&pwm3 0 25000 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0_in_vp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* mipi_dcphy0 needs to be enabled
|
|
* when dsi0 is enabled
|
|
*/
|
|
&dsi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0_in_vp2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi0_in_vp3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0_panel {
|
|
power-supply = <&vcc3v3_lcd_n>;
|
|
reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_rst_gpio>;
|
|
};
|
|
|
|
&gmac0 {
|
|
/* Use rgmii-rxid mode to disable rx delay inside Soc */
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus>;
|
|
|
|
tx_delay = <0x44>;
|
|
/* rx_delay = <0x4f>; */
|
|
|
|
phy-handle = <&rgmii_phy0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac1 {
|
|
/* Use rgmii-rxid mode to disable rx delay inside Soc */
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1_miim
|
|
&gmac1_tx_bus2
|
|
&gmac1_rx_bus2
|
|
&gmac1_rgmii_clk
|
|
&gmac1_rgmii_bus>;
|
|
|
|
tx_delay = <0x44>;
|
|
/* rx_delay = <0x4f>; */
|
|
|
|
phy-handle = <&rgmii_phy1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
|
compatible = "rockchip,rk8603";
|
|
reg = <0x43>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c6 {
|
|
status = "okay";
|
|
gt1x: gt1x@14 {
|
|
compatible = "goodix,gt1x";
|
|
reg = <0x14>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&touch_gpio>;
|
|
goodix,rst-gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
|
goodix,irq-gpio = <&gpio0 RK_PC6 IRQ_TYPE_LEVEL_LOW>;
|
|
power-supply = <&vcc3v3_lcd_n>;
|
|
};
|
|
};
|
|
|
|
&i2c8 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c8m3_xfer>;
|
|
|
|
usbc0: fusb302@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_int>;
|
|
vbus-supply = <&vbus5v0_typec>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_role_sw: endpoint@0 {
|
|
remote-endpoint = <&dwc3_0_role_switch>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
op-sink-microwatt = <1000000>;
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
|
|
altmodes {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
altmode@0 {
|
|
reg = <0>;
|
|
svid = <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_orien_sw: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dp_altmode_mux: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
&mipi_dcphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie30phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x4 {
|
|
compatible = "rockchip,rk3588-pcie-ep";
|
|
memory-region = <&dma_trans>;
|
|
busno = <1>;
|
|
};
|
|
|
|
&pinctrl {
|
|
lcd {
|
|
lcd_rst_gpio: lcd-rst-gpio {
|
|
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
touch {
|
|
touch_gpio: touch-gpio {
|
|
rockchip,pins =
|
|
<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb-typec {
|
|
usbc0_int: usbc0-int {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
typec5v_pwren: typec5v-pwren {
|
|
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm14 {
|
|
pinctrl-0 = <&pwm14m1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&route_dsi0 {
|
|
status = "okay";
|
|
connect = <&vp3_out_dsi0>;
|
|
};
|
|
|
|
&u2phy2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&u2phy3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
phy-supply = <&vcc5v0_host>;
|
|
};
|
|
|
|
&u2phy2_host {
|
|
status = "disabled";
|
|
};
|
|
|
|
&u2phy3_host {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbdp_phy0 {
|
|
orientation-switch;
|
|
svid = <0xff01>;
|
|
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_orien_sw>;
|
|
};
|
|
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "otg";
|
|
usb-role-switch;
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dwc3_0_role_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_role_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbhost3_0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usbhost_dwc3_0 {
|
|
status = "disabled";
|
|
};
|