642 lines
11 KiB
Plaintext
642 lines
11 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
#include "dt-bindings/usb/pd.h"
|
|
#include "rk3588.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/input/rk-input.h>
|
|
#include <dt-bindings/display/drm_mipi_dsi.h>
|
|
#include <dt-bindings/display/rockchip_vop.h>
|
|
#include "rk3588-rk806-single.dtsi"
|
|
|
|
/ {
|
|
adc_keys: adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
vol-up-key {
|
|
label = "volume up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
press-threshold-microvolt = <17000>;
|
|
};
|
|
};
|
|
|
|
dp0_sound: dp0-sound {
|
|
status = "disabled";
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,card-name= "rockchip-dp0";
|
|
rockchip,mclk-fs = <512>;
|
|
rockchip,cpu = <&spdif_tx2>;
|
|
rockchip,codec = <&dp0 1>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
hdmi1_sound: hdmi1-sound {
|
|
status = "disabled";
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,mclk-fs = <128>;
|
|
rockchip,card-name = "rockchip-hdmi1";
|
|
rockchip,cpu = <&i2s6_8ch>;
|
|
rockchip,codec = <&hdmi1>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
work_led: work {
|
|
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
pcie30_avdd1v8: pcie30-avdd1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd1v8";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&avcc_1v8_s0>;
|
|
};
|
|
|
|
pcie30_avdd0v75: pcie30-avdd0v75 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd0v75";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
vin-supply = <&avdd_0v75_s0>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
bar0_region: bar0-region@3c000000 {
|
|
reg = <0x0 0x3c000000 0x0 0x00400000>;
|
|
};
|
|
bar2_region: bar2-region@40000000 {
|
|
reg = <0x0 0x40000000 0x0 0x04000000>;
|
|
};
|
|
};
|
|
|
|
test-power {
|
|
status = "okay";
|
|
};
|
|
|
|
vbus5v0_typec: vbus5v0-typec {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbus5v0_typec";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&typec5v_pwren>;
|
|
};
|
|
|
|
vcc12v_dcin: vcc12v-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
vcc5v0_usb: vcc5v0-usb {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&av1d_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
mem-supply = <&vdd_cpu_big0_mem_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
mem-supply = <&vdd_cpu_big1_mem_s0>;
|
|
};
|
|
|
|
&dp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0_in_vp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
mem-supply = <&vdd_gpu_mem_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1 {
|
|
enable-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmim2_tx1_cec &hdmim1_tx1_hpd &hdmim1_tx1_scl &hdmim1_tx1_sda>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac0 {
|
|
/* Use rgmii-rxid mode to disable rx delay inside Soc */
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus
|
|
ð0_pins>;
|
|
|
|
tx_delay = <0x44>;
|
|
/* rx_delay = <0x4f>; */
|
|
|
|
phy-handle = <&rgmii_phy0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iep {
|
|
status = "okay";
|
|
};
|
|
|
|
&iep_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
|
compatible = "rockchip,rk8603";
|
|
reg = <0x43>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1m2_xfer>;
|
|
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4m2_xfer>;
|
|
|
|
usbc0: fusb302@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_int>;
|
|
vbus-supply = <&vbus5v0_typec>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_role_sw: endpoint@0 {
|
|
remote-endpoint = <&dwc3_0_role_switch>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
op-sink-microwatt = <1000000>;
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
|
|
altmodes {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
altmode@0 {
|
|
reg = <0>;
|
|
svid = <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_orien_sw: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dp_altmode_mux: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s6_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege2_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege3_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
clocks = <&cru REFCLKO25M_ETH0_OUT>;
|
|
};
|
|
};
|
|
|
|
&mpp_srv {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie30phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x4 {
|
|
compatible = "rockchip,rk3588-pcie-std-ep";
|
|
memory-region = <&bar0_region>, <&bar2_region>;
|
|
memory-region-names = "bar0", "bar2";
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_core0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_core1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu {
|
|
rknpu-supply = <&vdd_npu_s0>;
|
|
mem-supply = <&vdd_npu_mem_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
status = "okay";
|
|
rockchip,sleep-debug-en = <1>;
|
|
};
|
|
|
|
&route_hdmi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vcc_1v8_s0>;
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
max-frequency = <200000000>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_u3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0 {
|
|
status = "okay";
|
|
orientation-switch;
|
|
svid = <0xff01>;
|
|
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_orien_sw>;
|
|
};
|
|
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
usb-role-switch;
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dwc3_0_role_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_role_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&vdpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
/* vp0 & vp1 splice for 8K output */
|
|
&vp0 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART0>;
|
|
};
|
|
|
|
&vp1 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART1>;
|
|
};
|
|
|
|
&vp2 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER2 | 1 << ROCKCHIP_VOP2_ESMART2)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART2>;
|
|
};
|
|
|
|
&pinctrl {
|
|
|
|
usb-typec {
|
|
usbc0_int: usbc0-int {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
typec5v_pwren: typec5v-pwren {
|
|
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|