297 lines
7.9 KiB
C
297 lines
7.9 KiB
C
/* drivers/input/sensors/access/mpu6880_acc.c
|
|
*
|
|
* Copyright (C) 2012-2015 ROCKCHIP.
|
|
* Author: oeh<oeh@rock-chips.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/uaccess.h>
|
|
#include <asm/atomic.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/input.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/of_gpio.h>
|
|
#ifdef CONFIG_HAS_EARLYSUSPEND
|
|
#include <linux/earlysuspend.h>
|
|
#endif
|
|
#include <linux/sensor-dev.h>
|
|
#include <linux/mpu6880.h>
|
|
|
|
static int mpu6880_set_lpf(struct i2c_client *client, int rate)
|
|
{
|
|
const short hz[] = {184, 98, 41, 20, 10, 5};
|
|
const int d[] = {DLPF_CFG_184HZ, DLPF_CFG_98HZ,
|
|
DLPF_CFG_41HZ, DLPF_CFG_20HZ,
|
|
DLPF_CFG_10HZ, DLPF_CFG_5HZ};
|
|
int i, h, data, result;
|
|
|
|
h = (rate >> 1);
|
|
i = 0;
|
|
while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1))
|
|
i++;
|
|
data = d[i];
|
|
|
|
result = sensor_write_reg(client, MPU6880_CONFIG, data);
|
|
if (result)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpu6880_set_rate(struct i2c_client *client, int rate)
|
|
{
|
|
u8 data;
|
|
int result;
|
|
u16 fifo_rate;
|
|
|
|
/* always use poll mode, no need to set rate */
|
|
return 0;
|
|
|
|
if ((rate < 1) || (rate > 250))
|
|
return -1;
|
|
|
|
data = rate - 1;
|
|
result = sensor_write_reg(client, MPU6880_SMPLRT_DIV, data);
|
|
if (result)
|
|
return result;
|
|
|
|
fifo_rate = 1000 / rate;
|
|
|
|
result = mpu6880_set_lpf(client, fifo_rate);
|
|
if (result)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_active(struct i2c_client *client, int enable, int rate)
|
|
{
|
|
struct sensor_private_data *sensor =
|
|
(struct sensor_private_data *) i2c_get_clientdata(client);
|
|
int result = 0;
|
|
int status = 0;
|
|
u8 pwrm1 = 0;
|
|
|
|
sensor->ops->ctrl_data = sensor_read_reg(client, sensor->ops->ctrl_reg);
|
|
pwrm1 = sensor_read_reg(client, MPU6880_PWR_MGMT_1);
|
|
|
|
if (!enable) {
|
|
status = BIT_ACCEL_STBY;
|
|
sensor->ops->ctrl_data |= status;
|
|
if ((sensor->ops->ctrl_data & BIT_GYRO_STBY) == BIT_GYRO_STBY) {
|
|
pwrm1 |= MPU6880_PWRM1_SLEEP;
|
|
}
|
|
} else {
|
|
status = ~BIT_ACCEL_STBY;
|
|
sensor->ops->ctrl_data &= status;
|
|
pwrm1 &= ~MPU6880_PWRM1_SLEEP;
|
|
|
|
mpu6880_set_rate(client, rate);
|
|
}
|
|
result = sensor_write_reg(client, sensor->ops->ctrl_reg, sensor->ops->ctrl_data);
|
|
if (result) {
|
|
dev_err(&client->dev, "%s:fail to set pwrm2\n", __func__);
|
|
return -1;
|
|
}
|
|
msleep(20);
|
|
|
|
result = sensor_write_reg(client, MPU6880_PWR_MGMT_1, pwrm1);
|
|
if (result) {
|
|
dev_err(&client->dev, "%s:fail to set pwrm1\n", __func__);
|
|
return -1;
|
|
}
|
|
msleep(50);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int sensor_init(struct i2c_client *client)
|
|
{
|
|
int res = 0;
|
|
u8 read_data = 0;
|
|
struct sensor_private_data *sensor =
|
|
(struct sensor_private_data *) i2c_get_clientdata(client);
|
|
|
|
read_data = sensor_read_reg(client, sensor->ops->id_reg);
|
|
if (read_data != sensor->ops->id_data) {
|
|
dev_err(&client->dev, "%s:check id err,read_data:%d,ops->id_data:%d\n", __func__, read_data, sensor->ops->id_data);
|
|
return -1;
|
|
}
|
|
|
|
res = sensor_write_reg(client, MPU6880_PWR_MGMT_1, 0x80);
|
|
if (res) {
|
|
dev_err(&client->dev, "set MPU6880_PWR_MGMT_1 error,res: %d!\n", res);
|
|
return res;
|
|
}
|
|
msleep(40);
|
|
|
|
res = sensor_write_reg(client, MPU6880_GYRO_CONFIG, 0x18);
|
|
if (res) {
|
|
dev_err(&client->dev, "set MPU6880_GYRO_CONFIG error,res: %d!\n", res);
|
|
return res;
|
|
}
|
|
msleep(10);
|
|
|
|
res = sensor_write_reg(client, MPU6880_ACCEL_CONFIG, 0x00);
|
|
if (res) {
|
|
dev_err(&client->dev, "set MPU6880_ACCEL_CONFIG error,res: %d!\n", res);
|
|
return res;
|
|
}
|
|
msleep(10);
|
|
|
|
res = sensor_write_reg(client, MPU6880_ACCEL_CONFIG2, 0x00);
|
|
if (res) {
|
|
dev_err(&client->dev, "set MPU6880_ACCEL_CONFIG2 error,res: %d!\n", res);
|
|
return res;
|
|
}
|
|
res = sensor_write_reg(client, MPU6880_PWR_MGMT_2, 0x3F);
|
|
if (res) {
|
|
dev_err(&client->dev, "set MPU6880_PWR_MGMT_2 error,res: %d!\n", res);
|
|
return res;
|
|
}
|
|
msleep(10);
|
|
res = sensor_write_reg(client, MPU6880_PWR_MGMT_1, 0x41);
|
|
if (res) {
|
|
dev_err(&client->dev, "set MPU6880_PWR_MGMT_1 error,res: %d!\n", res);
|
|
return res;
|
|
}
|
|
msleep(10);
|
|
|
|
res = sensor->ops->active(client, 0, sensor->pdata->poll_delay_ms);
|
|
if (res) {
|
|
dev_err(&client->dev, "%s:line=%d,error\n", __func__, __LINE__);
|
|
return res;
|
|
}
|
|
return res;
|
|
}
|
|
|
|
static int gsensor_report_value(struct i2c_client *client, struct sensor_axis *axis)
|
|
{
|
|
struct sensor_private_data *sensor =
|
|
(struct sensor_private_data *) i2c_get_clientdata(client);
|
|
|
|
if (sensor->status_cur == SENSOR_ON) {
|
|
/* Report acceleration sensor information */
|
|
input_report_abs(sensor->input_dev, ABS_X, axis->x);
|
|
input_report_abs(sensor->input_dev, ABS_Y, axis->y);
|
|
input_report_abs(sensor->input_dev, ABS_Z, axis->z);
|
|
input_sync(sensor->input_dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_report_value(struct i2c_client *client)
|
|
{
|
|
struct sensor_private_data *sensor =
|
|
(struct sensor_private_data *) i2c_get_clientdata(client);
|
|
struct sensor_platform_data *pdata = sensor->pdata;
|
|
int ret = 0;
|
|
short x, y, z;
|
|
struct sensor_axis axis;
|
|
u8 buffer[6] = {0};
|
|
char value = 0;
|
|
|
|
if (sensor->ops->read_len < 6) {
|
|
dev_err(&client->dev, "%s:lenth is error,len=%d\n", __func__, sensor->ops->read_len);
|
|
return -1;
|
|
}
|
|
|
|
memset(buffer, 0, 6);
|
|
|
|
/* Data bytes from hardware xL, xH, yL, yH, zL, zH */
|
|
do {
|
|
*buffer = sensor->ops->read_reg;
|
|
ret = sensor_rx_data(client, buffer, sensor->ops->read_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
} while (0);
|
|
|
|
x = ((buffer[0] << 8) & 0xff00) + (buffer[1] & 0xFF);
|
|
y = ((buffer[2] << 8) & 0xff00) + (buffer[3] & 0xFF);
|
|
z = ((buffer[4] << 8) & 0xff00) + (buffer[5] & 0xFF);
|
|
axis.x = (pdata->orientation[0]) * x + (pdata->orientation[1]) * y + (pdata->orientation[2]) * z;
|
|
axis.y = (pdata->orientation[3]) * x + (pdata->orientation[4]) * y + (pdata->orientation[5]) * z;
|
|
axis.z = (pdata->orientation[6]) * x + (pdata->orientation[7]) * y + (pdata->orientation[8]) * z;
|
|
|
|
gsensor_report_value(client, &axis);
|
|
|
|
mutex_lock(&(sensor->data_mutex));
|
|
sensor->axis = axis;
|
|
mutex_unlock(&(sensor->data_mutex));
|
|
|
|
if ((sensor->pdata->irq_enable) && (sensor->ops->int_status_reg >= 0))
|
|
value = sensor_read_reg(client, sensor->ops->int_status_reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct sensor_operate gsensor_mpu6880_ops = {
|
|
.name = "mpu6880_acc",
|
|
.type = SENSOR_TYPE_ACCEL,
|
|
.id_i2c = ACCEL_ID_MPU6880,
|
|
.read_reg = MPU6880_ACCEL_XOUT_H,
|
|
.read_len = 6,
|
|
.id_reg = MPU6880_WHOAMI,
|
|
.id_data = MPU6880_DEVICE_ID,
|
|
.precision = MPU6880_PRECISION,
|
|
.ctrl_reg = MPU6880_PWR_MGMT_2,
|
|
.int_status_reg = MPU6880_INT_STATUS,
|
|
.range = {-32768, 32768},
|
|
.trig = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
|
|
.active = sensor_active,
|
|
.init = sensor_init,
|
|
.report = sensor_report_value,
|
|
};
|
|
|
|
/****************operate according to sensor chip:end************/
|
|
static int gsensor_mpu6880_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *devid)
|
|
{
|
|
return sensor_register_device(client, NULL, devid, &gsensor_mpu6880_ops);
|
|
}
|
|
|
|
static int gsensor_mpu6880_remove(struct i2c_client *client)
|
|
{
|
|
return sensor_unregister_device(client, NULL, &gsensor_mpu6880_ops);
|
|
}
|
|
|
|
static const struct i2c_device_id gsensor_mpu6880_id[] = {
|
|
{"mpu6880_acc", ACCEL_ID_MPU6880},
|
|
{}
|
|
};
|
|
|
|
static struct i2c_driver gsensor_mpu6880_driver = {
|
|
.probe = gsensor_mpu6880_probe,
|
|
.remove = gsensor_mpu6880_remove,
|
|
.shutdown = sensor_shutdown,
|
|
.id_table = gsensor_mpu6880_id,
|
|
.driver = {
|
|
.name = "gsensor_mpu6880",
|
|
#ifdef CONFIG_PM
|
|
.pm = &sensor_pm_ops,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
module_i2c_driver(gsensor_mpu6880_driver);
|
|
|
|
MODULE_AUTHOR("oeh <oeh@rock-chips.com>");
|
|
MODULE_DESCRIPTION("mpu6880 3-Axis accelerometer driver");
|
|
MODULE_LICENSE("GPL");
|