1501 lines
35 KiB
C
1501 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* gc02m2 driver
|
|
*
|
|
* Copyright (C) 2020 Rockchip Electronics Co., Ltd.
|
|
*
|
|
* V0.0X01.0X01 init version.
|
|
* V0.0X01.0X02
|
|
* 1.add hflip/vflip function.
|
|
* 2.modify set_gain_reg function.
|
|
*/
|
|
|
|
//#define DEBUG 1
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/version.h>
|
|
#include <linux/rk-camera-module.h>
|
|
#include <media/media-entity.h>
|
|
#include <media/v4l2-async.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-subdev.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define DRIVER_VERSION KERNEL_VERSION(0, 0x01, 0x02)
|
|
|
|
#ifndef V4L2_CID_DIGITAL_GAIN
|
|
#define V4L2_CID_DIGITAL_GAIN V4L2_CID_GAIN
|
|
#endif
|
|
|
|
#define GC02M2_MIPI_LINK_FREQ 336000000
|
|
|
|
/* pixel rate = link frequency * 1 * lanes / BITS_PER_SAMPLE */
|
|
#define GC02M2_PIXEL_RATE (GC02M2_MIPI_LINK_FREQ * 2LL * 1LL / 10)
|
|
#define GC02M2_XVCLK_FREQ 24000000
|
|
|
|
#define CHIP_ID 0x02f0
|
|
#define GC02M2_REG_CHIP_ID_H 0xf0
|
|
#define GC02M2_REG_CHIP_ID_L 0xf1
|
|
#define SENSOR_ID(_msb, _lsb) ((_msb) << 8 | (_lsb))
|
|
|
|
#define GC02M2_PAGE_SELECT 0xfe
|
|
#define GC02M2_MODE_SELECT 0x3e
|
|
#define GC02M2_MODE_SW_STANDBY 0x00
|
|
#define GC02M2_MODE_STREAMING 0x90
|
|
|
|
#define GC02M2_REG_EXPOSURE_H 0x03
|
|
#define GC02M2_REG_EXPOSURE_L 0x04
|
|
#define GC02M2_EXPOSURE_MIN 4
|
|
#define GC02M2_EXPOSURE_STEP 1
|
|
#define GC02M2_VTS_MAX 0x7fff
|
|
|
|
#define GC02M2_ANALOG_GAIN_REG 0xb6
|
|
#define GC02M2_PREGAIN_H_REG 0xb1
|
|
#define GC02M2_PREGAIN_L_REG 0xb2
|
|
#define GC02M2_GAIN_MIN 0x40
|
|
#define GC02M2_GAIN_MAX 0x286
|
|
#define GC02M2_GAIN_STEP 1
|
|
#define GC02M2_GAIN_DEFAULT 0x80
|
|
|
|
#define GC02M2_REG_VTS_H 0x41
|
|
#define GC02M2_REG_VTS_L 0x42
|
|
|
|
#define GC02M2_MIRROR_FLIP_REG 0x17
|
|
#define SC200AI_FETCH_MIRROR(VAL, ENABLE) (ENABLE ? VAL | 0x01 : VAL & 0xfe)
|
|
#define SC200AI_FETCH_FLIP(VAL, ENABLE) (ENABLE ? VAL | 0x02 : VAL & 0xfd)
|
|
|
|
#define GC02M2_LANES 1
|
|
#define GC02M2_BITS_PER_SAMPLE 10
|
|
#define OF_CAMERA_PINCTRL_STATE_DEFAULT "rockchip,camera_default"
|
|
#define OF_CAMERA_PINCTRL_STATE_SLEEP "rockchip,camera_sleep"
|
|
#define GC02M2_NAME "gc02m2"
|
|
#define REG_NULL 0xFF
|
|
|
|
static const char * const gc02m2_supply_names[] = {
|
|
"dovdd", /* Digital I/O power */
|
|
"avdd", /* Analog power */
|
|
"dvdd", /* Digital core power */
|
|
};
|
|
|
|
#define GC02M2_NUM_SUPPLIES ARRAY_SIZE(gc02m2_supply_names)
|
|
|
|
#define to_gc02m2(sd) container_of(sd, struct gc02m2, subdev)
|
|
|
|
struct regval {
|
|
u8 addr;
|
|
u8 val;
|
|
};
|
|
|
|
struct gc02m2_mode {
|
|
u32 bus_fmt;
|
|
u32 width;
|
|
u32 height;
|
|
struct v4l2_fract max_fps;
|
|
u32 hts_def;
|
|
u32 vts_def;
|
|
u32 exp_def;
|
|
const struct regval *reg_list;
|
|
u32 hdr_mode;
|
|
u32 vc[PAD_MAX];
|
|
};
|
|
|
|
struct gc02m2 {
|
|
struct i2c_client *client;
|
|
struct clk *xvclk;
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *pwdn_gpio;
|
|
struct regulator_bulk_data supplies[GC02M2_NUM_SUPPLIES];
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pins_default;
|
|
struct pinctrl_state *pins_sleep;
|
|
struct v4l2_subdev subdev;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *anal_gain;
|
|
struct v4l2_ctrl *digi_gain;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *test_pattern;
|
|
struct mutex mutex;
|
|
bool streaming;
|
|
bool power_on;
|
|
const struct gc02m2_mode *cur_mode;
|
|
unsigned int lane_num;
|
|
unsigned int pixel_rate;
|
|
u32 module_index;
|
|
const char *module_facing;
|
|
const char *module_name;
|
|
const char *len_name;
|
|
};
|
|
|
|
/*
|
|
* Xclk 24Mhz
|
|
*/
|
|
static const struct regval gc02m2_global_regs[] = {
|
|
/*system*/
|
|
{0xfc, 0x01},
|
|
{0xf4, 0x41},
|
|
{0xf5, 0xc0},
|
|
{0xf6, 0x44},
|
|
{0xf8, 0x38},
|
|
{0xf9, 0x82},
|
|
{0xfa, 0x00},
|
|
{0xfd, 0x80},
|
|
{0xfc, 0x81},
|
|
{0xfe, 0x03},
|
|
{0x01, 0x0b},
|
|
{0xf7, 0x01},
|
|
{0xfc, 0x80},
|
|
{0xfc, 0x80},
|
|
{0xfc, 0x80},
|
|
{0xfc, 0x8e},
|
|
/*CISCTL*/
|
|
{0xfe, 0x00},
|
|
{0x87, 0x09},
|
|
{0xee, 0x72},
|
|
{0xfe, 0x01},
|
|
{0x8c, 0x90},
|
|
{0xfe, 0x00},
|
|
{0x90, 0x00},
|
|
{0x03, 0x04},
|
|
{0x04, 0x7d},
|
|
{0x41, 0x04},
|
|
{0x42, 0xf4},
|
|
{0x05, 0x04},
|
|
{0x06, 0x48},
|
|
{0x07, 0x00},
|
|
{0x08, 0x18},
|
|
{0x9d, 0x18},
|
|
{0x09, 0x00},
|
|
{0x0a, 0x02},
|
|
{0x0d, 0x04},
|
|
{0x0e, 0xbc},
|
|
{0x17, 0x80},
|
|
{0x19, 0x04},
|
|
{0x24, 0x00},
|
|
{0x56, 0x20},
|
|
{0x5b, 0x00},
|
|
{0x5e, 0x01},
|
|
/*analog Register width*/
|
|
{0x21, 0x3c},
|
|
{0x44, 0x20},
|
|
{0xcc, 0x01},
|
|
/*analog mode*/
|
|
{0x1a, 0x04},
|
|
{0x1f, 0x11},
|
|
{0x27, 0x30},
|
|
{0x2b, 0x00},
|
|
{0x33, 0x00},
|
|
{0x53, 0x90},
|
|
{0xe6, 0x50},
|
|
/*analog voltage*/
|
|
{0x39, 0x07},
|
|
{0x43, 0x04},
|
|
{0x46, 0x2a},
|
|
{0x7c, 0xa0},
|
|
{0xd0, 0xbe},
|
|
{0xd1, 0x40},
|
|
{0xd2, 0x40},
|
|
{0xd3, 0xb3},
|
|
{0xde, 0x1c},
|
|
/*analog current*/
|
|
{0xcd, 0x06},
|
|
{0xce, 0x6f},
|
|
/*CISCTL RESET*/
|
|
{0xfc, 0x88},
|
|
{0xfe, 0x10},
|
|
{0xfe, 0x00},
|
|
{0xfc, 0x8e},
|
|
{0xfe, 0x00},
|
|
{0xfe, 0x00},
|
|
{0xfe, 0x00},
|
|
{0xfe, 0x00},
|
|
{0xfc, 0x88},
|
|
{0xfe, 0x10},
|
|
{0xfe, 0x00},
|
|
{0xfc, 0x8e},
|
|
{0xfe, 0x04},
|
|
{0xe0, 0x01},
|
|
{0xfe, 0x00},
|
|
/*ISP*/
|
|
{0xfe, 0x01},
|
|
{0x53, 0x54},
|
|
{0x87, 0x53},
|
|
{0x89, 0x03},
|
|
/*Gain*/
|
|
{0xfe, 0x00},
|
|
{0xb0, 0x74},
|
|
{0xb1, 0x04},
|
|
{0xb2, 0x00},
|
|
{0xb6, 0x00},
|
|
{0xfe, 0x04},
|
|
{0xd8, 0x00},
|
|
{0xc0, 0x40},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x60},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0xc0},
|
|
{0xc0, 0x2a},
|
|
{0xc0, 0x80},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x40},
|
|
{0xc0, 0xa0},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x90},
|
|
{0xc0, 0x19},
|
|
{0xc0, 0xc0},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0xD0},
|
|
{0xc0, 0x2F},
|
|
{0xc0, 0xe0},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x90},
|
|
{0xc0, 0x39},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0x20},
|
|
{0xc0, 0x04},
|
|
{0xc0, 0x20},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0xe0},
|
|
{0xc0, 0x0f},
|
|
{0xc0, 0x40},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0xe0},
|
|
{0xc0, 0x1a},
|
|
{0xc0, 0x60},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0x20},
|
|
{0xc0, 0x25},
|
|
{0xc0, 0x80},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0xa0},
|
|
{0xc0, 0x2c},
|
|
{0xc0, 0xa0},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0xe0},
|
|
{0xc0, 0x32},
|
|
{0xc0, 0xc0},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0x20},
|
|
{0xc0, 0x38},
|
|
{0xc0, 0xe0},
|
|
{0xc0, 0x01},
|
|
{0xc0, 0x60},
|
|
{0xc0, 0x3c},
|
|
{0xc0, 0x00},
|
|
{0xc0, 0x02},
|
|
{0xc0, 0xa0},
|
|
{0xc0, 0x40},
|
|
{0xc0, 0x80},
|
|
{0xc0, 0x02},
|
|
{0xc0, 0x18},
|
|
{0xc0, 0x5c},
|
|
{0xfe, 0x00},
|
|
{0x9f, 0x10},
|
|
/*BLK*/
|
|
{0xfe, 0x00},
|
|
{0x26, 0x20},
|
|
{0xfe, 0x01},
|
|
{0x40, 0x22},
|
|
{0x46, 0x7f},
|
|
{0x49, 0x0f},
|
|
{0x4a, 0xf0},
|
|
{0xfe, 0x04},
|
|
{0x14, 0x80},
|
|
{0x15, 0x80},
|
|
{0x16, 0x80},
|
|
{0x17, 0x80},
|
|
/*anti_blooming*/
|
|
{0xfe, 0x01},
|
|
{0x41, 0x20},
|
|
{0x4c, 0x00},
|
|
{0x4d, 0x0c},
|
|
{0x44, 0x08},
|
|
{0x48, 0x03},
|
|
/*Window 1600X1200*/
|
|
{0xfe, 0x01},
|
|
{0x90, 0x01},
|
|
{0x91, 0x00},
|
|
{0x92, 0x06},
|
|
{0x93, 0x00},
|
|
{0x94, 0x06},
|
|
{0x95, 0x04},
|
|
{0x96, 0xb0},
|
|
{0x97, 0x06},
|
|
{0x98, 0x40},
|
|
/*mipi*/
|
|
{0xfe, 0x03},
|
|
{0x01, 0x23},
|
|
{0x03, 0xce},
|
|
{0x04, 0x48},
|
|
{0x15, 0x01},
|
|
{0x21, 0x10},
|
|
{0x22, 0x05},
|
|
{0x23, 0x20},
|
|
{0x25, 0x20},
|
|
{0x26, 0x08},
|
|
{0x29, 0x06},
|
|
{0x2a, 0x0a},
|
|
{0x2b, 0x08},
|
|
/*out*/
|
|
{0xfe, 0x01},
|
|
{0x8c, 0x10},
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
static const struct gc02m2_mode supported_modes[] = {
|
|
{
|
|
.width = 1600,
|
|
.height = 1200,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 300000,
|
|
},
|
|
.bus_fmt = MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
.exp_def = 0x0475,
|
|
.hts_def = 0x0448 * 2,
|
|
.vts_def = 0x04f4,
|
|
.reg_list = gc02m2_global_regs,
|
|
.hdr_mode = NO_HDR,
|
|
.vc[PAD0] = V4L2_MBUS_CSI2_CHANNEL_0,
|
|
},
|
|
};
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
GC02M2_MIPI_LINK_FREQ
|
|
};
|
|
|
|
static int gc02m2_write_reg(struct i2c_client *client, u8 reg, u8 val)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 buf[2];
|
|
int ret;
|
|
|
|
buf[0] = reg & 0xFF;
|
|
buf[1] = val;
|
|
|
|
msg.addr = client->addr;
|
|
msg.flags = client->flags;
|
|
msg.buf = buf;
|
|
msg.len = sizeof(buf);
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret >= 0)
|
|
return 0;
|
|
|
|
dev_err(&client->dev,
|
|
"gc02m2 write reg(0x%x val:0x%x) failed !\n", reg, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_write_array(struct i2c_client *client,
|
|
const struct regval *regs)
|
|
{
|
|
u32 i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++) {
|
|
ret = gc02m2_write_reg(client, regs[i].addr, regs[i].val);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_read_reg(struct i2c_client *client, u8 reg, u8 *val)
|
|
{
|
|
struct i2c_msg msg[2];
|
|
u8 buf[1];
|
|
int ret;
|
|
|
|
buf[0] = reg & 0xFF;
|
|
|
|
msg[0].addr = client->addr;
|
|
msg[0].flags = client->flags;
|
|
msg[0].buf = buf;
|
|
msg[0].len = sizeof(buf);
|
|
|
|
msg[1].addr = client->addr;
|
|
msg[1].flags = client->flags | I2C_M_RD;
|
|
msg[1].buf = buf;
|
|
msg[1].len = 1;
|
|
|
|
ret = i2c_transfer(client->adapter, msg, 2);
|
|
if (ret >= 0) {
|
|
*val = buf[0];
|
|
return 0;
|
|
}
|
|
|
|
dev_err(&client->dev,
|
|
"gc02m2 read reg:0x%x failed !\n", reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_get_reso_dist(const struct gc02m2_mode *mode,
|
|
struct v4l2_mbus_framefmt *framefmt)
|
|
{
|
|
return abs(mode->width - framefmt->width) +
|
|
abs(mode->height - framefmt->height);
|
|
}
|
|
|
|
static const struct gc02m2_mode *
|
|
gc02m2_find_best_fit(struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct v4l2_mbus_framefmt *framefmt = &fmt->format;
|
|
int dist;
|
|
int cur_best_fit = 0;
|
|
int cur_best_fit_dist = -1;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
|
|
dist = gc02m2_get_reso_dist(&supported_modes[i], framefmt);
|
|
if (cur_best_fit_dist == -1 || dist < cur_best_fit_dist) {
|
|
cur_best_fit_dist = dist;
|
|
cur_best_fit = i;
|
|
}
|
|
}
|
|
|
|
return &supported_modes[cur_best_fit];
|
|
}
|
|
|
|
static u32 GC02M2_AGC_Param[17][2] = {
|
|
{ 64 , 0 },
|
|
{ 96 , 1 },
|
|
{ 127 , 2 },
|
|
{ 157 , 3 },
|
|
{ 198 , 4 },
|
|
{ 227 , 5 },
|
|
{ 259 , 6 },
|
|
{ 287 , 7 },
|
|
{ 318 , 8 },
|
|
{ 356 , 9 },
|
|
{ 392 , 10 },
|
|
{ 420 , 11 },
|
|
{ 451 , 12 },
|
|
{ 480 , 13 },
|
|
{ 513 , 14 },
|
|
{ 646 , 15 },
|
|
{ 0xffff , 16 },
|
|
};
|
|
|
|
static int gc02m2_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
const struct gc02m2_mode *mode;
|
|
s64 h_blank, vblank_def;
|
|
|
|
mutex_lock(&gc02m2->mutex);
|
|
|
|
mode = gc02m2_find_best_fit(fmt);
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
|
|
#else
|
|
mutex_unlock(&gc02m2->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
gc02m2->cur_mode = mode;
|
|
h_blank = mode->hts_def - mode->width;
|
|
__v4l2_ctrl_modify_range(gc02m2->hblank, h_blank,
|
|
h_blank, 1, h_blank);
|
|
vblank_def = mode->vts_def - mode->height;
|
|
__v4l2_ctrl_modify_range(gc02m2->vblank, vblank_def,
|
|
GC02M2_VTS_MAX - mode->height,
|
|
1, vblank_def);
|
|
}
|
|
|
|
mutex_unlock(&gc02m2->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc02m2_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
const struct gc02m2_mode *mode = gc02m2->cur_mode;
|
|
|
|
mutex_lock(&gc02m2->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
|
|
#else
|
|
mutex_unlock(&gc02m2->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
/* format info: width/height/data type/virctual channel */
|
|
if (fmt->pad < PAD_MAX && mode->hdr_mode != NO_HDR)
|
|
fmt->reserved[0] = mode->vc[fmt->pad];
|
|
else
|
|
fmt->reserved[0] = mode->vc[PAD0];
|
|
}
|
|
mutex_unlock(&gc02m2->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc02m2_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
if (code->index != 0)
|
|
return -EINVAL;
|
|
|
|
code->code = gc02m2->cur_mode->bus_fmt;;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc02m2_enum_frame_sizes(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fse->code != supported_modes[0].bus_fmt)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = supported_modes[fse->index].width;
|
|
fse->max_height = supported_modes[fse->index].height;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc02m2_g_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
const struct gc02m2_mode *mode = gc02m2->cur_mode;
|
|
|
|
fi->interval = mode->max_fps;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gc02m2_get_module_inf(struct gc02m2 *gc02m2,
|
|
struct rkmodule_inf *inf)
|
|
{
|
|
memset(inf, 0, sizeof(*inf));
|
|
strlcpy(inf->base.sensor, GC02M2_NAME, sizeof(inf->base.sensor));
|
|
strlcpy(inf->base.module, gc02m2->module_name,
|
|
sizeof(inf->base.module));
|
|
strlcpy(inf->base.lens, gc02m2->len_name, sizeof(inf->base.lens));
|
|
}
|
|
|
|
static long gc02m2_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
struct rkmodule_hdr_cfg *hdr_cfg;
|
|
long ret = 0;
|
|
int i, w, h;
|
|
u32 stream = 0;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
gc02m2_get_module_inf(gc02m2, (struct rkmodule_inf *)arg);
|
|
break;
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
stream = *((u32 *)arg);
|
|
if (stream) {
|
|
ret = gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_MODE_SELECT,
|
|
GC02M2_MODE_STREAMING);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
} else {
|
|
ret = gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_MODE_SELECT,
|
|
GC02M2_MODE_SW_STANDBY);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
}
|
|
break;
|
|
|
|
case RKMODULE_GET_HDR_CFG:
|
|
hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
|
|
hdr_cfg->esp.mode = HDR_NORMAL_VC;
|
|
hdr_cfg->hdr_mode = gc02m2->cur_mode->hdr_mode;
|
|
break;
|
|
case RKMODULE_SET_HDR_CFG:
|
|
hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
|
|
w = gc02m2->cur_mode->width;
|
|
h = gc02m2->cur_mode->height;
|
|
for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
|
|
if (w == supported_modes[i].width &&
|
|
h == supported_modes[i].height &&
|
|
supported_modes[i].hdr_mode == hdr_cfg->hdr_mode) {
|
|
gc02m2->cur_mode = &supported_modes[i];
|
|
break;
|
|
}
|
|
}
|
|
if (i == ARRAY_SIZE(supported_modes)) {
|
|
dev_err(&gc02m2->client->dev,
|
|
"not find hdr mode:%d %dx%d config\n",
|
|
hdr_cfg->hdr_mode, w, h);
|
|
ret = -EINVAL;
|
|
} else {
|
|
w = gc02m2->cur_mode->hts_def - gc02m2->cur_mode->width;
|
|
h = gc02m2->cur_mode->vts_def - gc02m2->cur_mode->height;
|
|
__v4l2_ctrl_modify_range(gc02m2->hblank, w, w, 1, w);
|
|
__v4l2_ctrl_modify_range(gc02m2->vblank, h,
|
|
GC02M2_VTS_MAX - gc02m2->cur_mode->height, 1, h);
|
|
}
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long gc02m2_compat_ioctl32(struct v4l2_subdev *sd,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
void __user *up = compat_ptr(arg);
|
|
struct rkmodule_inf *inf;
|
|
struct rkmodule_hdr_cfg *hdr;
|
|
long ret;
|
|
u32 stream = 0;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
inf = kzalloc(sizeof(*inf), GFP_KERNEL);
|
|
if (!inf) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = gc02m2_ioctl(sd, cmd, inf);
|
|
if (!ret)
|
|
ret = copy_to_user(up, inf, sizeof(*inf));
|
|
kfree(inf);
|
|
break;
|
|
case RKMODULE_GET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = gc02m2_ioctl(sd, cmd, hdr);
|
|
if (!ret)
|
|
ret = copy_to_user(up, hdr, sizeof(*hdr));
|
|
kfree(hdr);
|
|
break;
|
|
case RKMODULE_SET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = copy_from_user(hdr, up, sizeof(*hdr));
|
|
if (!ret)
|
|
ret = gc02m2_ioctl(sd, cmd, hdr);
|
|
kfree(hdr);
|
|
break;
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
ret = copy_from_user(&stream, up, sizeof(u32));
|
|
if (!ret)
|
|
ret = gc02m2_ioctl(sd, cmd, &stream);
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/* Calculate the delay in us by clock rate and clock cycles */
|
|
static inline u32 gc02m2_cal_delay(u32 cycles)
|
|
{
|
|
return DIV_ROUND_UP(cycles, GC02M2_XVCLK_FREQ / 1000 / 1000);
|
|
}
|
|
|
|
static int __gc02m2_power_on(struct gc02m2 *gc02m2)
|
|
{
|
|
int ret;
|
|
u32 delay_us;
|
|
struct device *dev = &gc02m2->client->dev;
|
|
|
|
if (!IS_ERR_OR_NULL(gc02m2->pins_default)) {
|
|
ret = pinctrl_select_state(gc02m2->pinctrl,
|
|
gc02m2->pins_default);
|
|
if (ret < 0)
|
|
dev_err(dev, "could not set pins\n");
|
|
}
|
|
ret = clk_set_rate(gc02m2->xvclk, GC02M2_XVCLK_FREQ);
|
|
if (ret < 0)
|
|
dev_warn(dev, "Failed to set xvclk rate (24MHz)\n");
|
|
if (clk_get_rate(gc02m2->xvclk) != GC02M2_XVCLK_FREQ)
|
|
dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
|
|
ret = clk_prepare_enable(gc02m2->xvclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable xvclk\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(GC02M2_NUM_SUPPLIES, gc02m2->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable regulators\n");
|
|
goto disable_clk;
|
|
}
|
|
|
|
if (!IS_ERR(gc02m2->reset_gpio))
|
|
gpiod_set_value_cansleep(gc02m2->reset_gpio, 1);
|
|
if (!IS_ERR(gc02m2->pwdn_gpio))
|
|
gpiod_set_value_cansleep(gc02m2->pwdn_gpio, 0);
|
|
|
|
if (!IS_ERR(gc02m2->reset_gpio))
|
|
gpiod_set_value_cansleep(gc02m2->reset_gpio, 0);
|
|
usleep_range(500, 1000);
|
|
|
|
/* 8192 cycles prior to first SCCB transaction */
|
|
delay_us = gc02m2_cal_delay(8192);
|
|
usleep_range(delay_us, delay_us * 2);
|
|
gc02m2->power_on = true;
|
|
return 0;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(gc02m2->xvclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __gc02m2_power_off(struct gc02m2 *gc02m2)
|
|
{
|
|
|
|
int ret;
|
|
struct device *dev = &gc02m2->client->dev;
|
|
|
|
if (!IS_ERR(gc02m2->pwdn_gpio))
|
|
gpiod_set_value_cansleep(gc02m2->pwdn_gpio, 1);
|
|
clk_disable_unprepare(gc02m2->xvclk);
|
|
if (!IS_ERR(gc02m2->reset_gpio))
|
|
gpiod_set_value_cansleep(gc02m2->reset_gpio, 1);
|
|
if (!IS_ERR_OR_NULL(gc02m2->pins_sleep)) {
|
|
ret = pinctrl_select_state(gc02m2->pinctrl,
|
|
gc02m2->pins_sleep);
|
|
if (ret < 0)
|
|
dev_dbg(dev, "could not set pins\n");
|
|
}
|
|
regulator_bulk_disable(GC02M2_NUM_SUPPLIES, gc02m2->supplies);
|
|
gc02m2->power_on = false;
|
|
}
|
|
|
|
static int __gc02m2_start_stream(struct gc02m2 *gc02m2)
|
|
{
|
|
int ret;
|
|
|
|
/* In case these controls are set before streaming */
|
|
mutex_unlock(&gc02m2->mutex);
|
|
ret = v4l2_ctrl_handler_setup(&gc02m2->ctrl_handler);
|
|
mutex_lock(&gc02m2->mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_MODE_SELECT,
|
|
GC02M2_MODE_STREAMING);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __gc02m2_stop_stream(struct gc02m2 *gc02m2)
|
|
{
|
|
int ret;
|
|
|
|
ret = gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_MODE_SELECT,
|
|
GC02M2_MODE_SW_STANDBY);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_PAGE_SELECT, 0x00);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_s_stream(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
struct i2c_client *client = gc02m2->client;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&gc02m2->mutex);
|
|
on = !!on;
|
|
if (on == gc02m2->streaming)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
ret = __gc02m2_start_stream(gc02m2);
|
|
if (ret) {
|
|
v4l2_err(sd, "start stream failed while write regs\n");
|
|
pm_runtime_put(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
} else {
|
|
__gc02m2_stop_stream(gc02m2);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
gc02m2->streaming = on;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&gc02m2->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
struct i2c_client *client = gc02m2->client;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&gc02m2->mutex);
|
|
|
|
/* If the power state is not modified - no work to do. */
|
|
if (gc02m2->power_on == !!on)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
ret = gc02m2_write_array(gc02m2->client, gc02m2->cur_mode->reg_list);
|
|
if (ret) {
|
|
v4l2_err(sd, "could not set init registers\n");
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
gc02m2->power_on = true;
|
|
} else {
|
|
pm_runtime_put(&client->dev);
|
|
gc02m2->power_on = false;
|
|
}
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&gc02m2->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int gc02m2_runtime_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
|
|
return __gc02m2_power_on(gc02m2);
|
|
}
|
|
|
|
static int gc02m2_runtime_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
|
|
__gc02m2_power_off(gc02m2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static int gc02m2_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(sd, fh->pad, 0);
|
|
const struct gc02m2_mode *def_mode = &supported_modes[0];
|
|
|
|
mutex_lock(&gc02m2->mutex);
|
|
/* Initialize try_fmt */
|
|
try_fmt->width = def_mode->width;
|
|
try_fmt->height = def_mode->height;
|
|
try_fmt->code = def_mode->bus_fmt;
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
|
|
mutex_unlock(&gc02m2->mutex);
|
|
/* No crop or compose */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int gc02m2_g_mbus_config(struct v4l2_subdev *sd, unsigned int pad_id,
|
|
struct v4l2_mbus_config *config)
|
|
{
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
const struct gc02m2_mode *mode = gc02m2->cur_mode;
|
|
u32 val = 0;
|
|
|
|
if (mode->hdr_mode == NO_HDR)
|
|
val = 1 << (GC02M2_LANES - 1) |
|
|
V4L2_MBUS_CSI2_CHANNEL_0 |
|
|
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
|
|
|
|
config->type = V4L2_MBUS_CSI2_DPHY;
|
|
config->flags = val;
|
|
return 0;
|
|
}
|
|
|
|
static int gc02m2_enum_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
if (fie->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
fie->code = supported_modes[fie->index].bus_fmt;
|
|
fie->width = supported_modes[fie->index].width;
|
|
fie->height = supported_modes[fie->index].height;
|
|
fie->interval = supported_modes[fie->index].max_fps;
|
|
fie->reserved[0] = supported_modes[fie->index].hdr_mode;
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops gc02m2_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(gc02m2_runtime_suspend,
|
|
gc02m2_runtime_resume, NULL)
|
|
};
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static const struct v4l2_subdev_internal_ops gc02m2_internal_ops = {
|
|
.open = gc02m2_open,
|
|
};
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops gc02m2_core_ops = {
|
|
.s_power = gc02m2_s_power,
|
|
.ioctl = gc02m2_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl32 = gc02m2_compat_ioctl32,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops gc02m2_video_ops = {
|
|
.s_stream = gc02m2_s_stream,
|
|
.g_frame_interval = gc02m2_g_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops gc02m2_pad_ops = {
|
|
.enum_mbus_code = gc02m2_enum_mbus_code,
|
|
.enum_frame_size = gc02m2_enum_frame_sizes,
|
|
.enum_frame_interval = gc02m2_enum_frame_interval,
|
|
.get_fmt = gc02m2_get_fmt,
|
|
.set_fmt = gc02m2_set_fmt,
|
|
.get_mbus_config = gc02m2_g_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops gc02m2_subdev_ops = {
|
|
.core = &gc02m2_core_ops,
|
|
.video = &gc02m2_video_ops,
|
|
.pad = &gc02m2_pad_ops,
|
|
};
|
|
|
|
#define DIGITAL_GAIN_BASE 1024
|
|
static int gc02m2_set_gain_reg(struct gc02m2 *gc02m2, u32 total_gain)
|
|
{
|
|
struct device *dev = &gc02m2->client->dev;
|
|
int ret = 0, i = 0;
|
|
u32 dgain = 0;
|
|
|
|
dev_dbg(dev, "total_gain = 0x%04x!\n", total_gain);
|
|
if (total_gain < 0x40)
|
|
total_gain = 0x40;
|
|
|
|
for (i = 15; i >= 0; i--) {
|
|
if (total_gain >= GC02M2_AGC_Param[i][0] &&
|
|
total_gain < GC02M2_AGC_Param[i + 1][0])
|
|
break;
|
|
}
|
|
ret = gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_ANALOG_GAIN_REG, GC02M2_AGC_Param[i][1]);
|
|
dgain = total_gain * DIGITAL_GAIN_BASE / GC02M2_AGC_Param[i][0];
|
|
|
|
dev_dbg(dev, "AGC_Param[%d][0] = %d dgain = 0x%04x!\n",
|
|
i, GC02M2_AGC_Param[i][0], dgain);
|
|
ret |= gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_PREGAIN_H_REG,
|
|
dgain >> 8);
|
|
ret |= gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_PREGAIN_L_REG,
|
|
dgain & 0xff);
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct gc02m2 *gc02m2 = container_of(ctrl->handler,
|
|
struct gc02m2, ctrl_handler);
|
|
struct i2c_client *client = gc02m2->client;
|
|
s64 max;
|
|
int ret = 0;
|
|
u32 vts = 0;
|
|
u8 val = 0;
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VBLANK:
|
|
/* Update max exposure while meeting expected vblanking */
|
|
max = gc02m2->cur_mode->height + ctrl->val - 16;
|
|
__v4l2_ctrl_modify_range(gc02m2->exposure,
|
|
gc02m2->exposure->minimum, max,
|
|
gc02m2->exposure->step,
|
|
gc02m2->exposure->default_value);
|
|
break;
|
|
}
|
|
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
/* 4 least significant bits of expsoure are fractional part */
|
|
ret = gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_REG_EXPOSURE_H,
|
|
(ctrl->val >> 8) & 0x3f);
|
|
ret |= gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_REG_EXPOSURE_L,
|
|
ctrl->val & 0xff);
|
|
|
|
break;
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = gc02m2_set_gain_reg(gc02m2, ctrl->val);
|
|
break;
|
|
case V4L2_CID_VBLANK:
|
|
vts = ctrl->val + gc02m2->cur_mode->height;
|
|
ret = gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_REG_VTS_H,
|
|
(vts >> 8) & 0x3f);
|
|
ret |= gc02m2_write_reg(gc02m2->client, GC02M2_REG_VTS_L,
|
|
vts & 0xff);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
ret = gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_read_reg(gc02m2->client, GC02M2_MIRROR_FLIP_REG, &val);
|
|
ret |= gc02m2_write_reg(client, GC02M2_MIRROR_FLIP_REG,
|
|
SC200AI_FETCH_MIRROR(val, ctrl->val));
|
|
break;
|
|
case V4L2_CID_VFLIP:
|
|
ret = gc02m2_write_reg(gc02m2->client,
|
|
GC02M2_PAGE_SELECT, 0x00);
|
|
ret |= gc02m2_read_reg(gc02m2->client, GC02M2_MIRROR_FLIP_REG, &val);
|
|
ret |= gc02m2_write_reg(client, GC02M2_MIRROR_FLIP_REG,
|
|
SC200AI_FETCH_FLIP(val, ctrl->val));
|
|
break;
|
|
default:
|
|
dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
|
|
__func__, ctrl->id, ctrl->val);
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops gc02m2_ctrl_ops = {
|
|
.s_ctrl = gc02m2_set_ctrl,
|
|
};
|
|
|
|
static int gc02m2_check_sensor_id(struct gc02m2 *gc02m2,
|
|
struct i2c_client *client)
|
|
{
|
|
struct device *dev = &gc02m2->client->dev;
|
|
u8 pid, ver = 0x00;
|
|
int ret;
|
|
unsigned short id;
|
|
|
|
ret = gc02m2_read_reg(client, GC02M2_REG_CHIP_ID_H, &pid);
|
|
if (ret) {
|
|
dev_err(dev, "Read chip ID H register error\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = gc02m2_read_reg(client, GC02M2_REG_CHIP_ID_L, &ver);
|
|
if (ret) {
|
|
dev_err(dev, "Read chip ID L register error\n");
|
|
return ret;
|
|
}
|
|
|
|
id = SENSOR_ID(pid, ver);
|
|
if (id != CHIP_ID) {
|
|
dev_err(dev, "Unexpected sensor id(%06x), ret(%d)\n", id, ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(dev, "detected gc%04x sensor\n", id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc02m2_configure_regulators(struct gc02m2 *gc02m2)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < GC02M2_NUM_SUPPLIES; i++)
|
|
gc02m2->supplies[i].supply = gc02m2_supply_names[i];
|
|
|
|
return devm_regulator_bulk_get(&gc02m2->client->dev,
|
|
GC02M2_NUM_SUPPLIES,
|
|
gc02m2->supplies);
|
|
}
|
|
|
|
static int gc02m2_parse_of(struct gc02m2 *gc02m2)
|
|
{
|
|
struct device *dev = &gc02m2->client->dev;
|
|
struct device_node *endpoint;
|
|
struct fwnode_handle *fwnode;
|
|
int rval;
|
|
|
|
endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
|
|
if (!endpoint) {
|
|
dev_err(dev, "Failed to get endpoint\n");
|
|
return -EINVAL;
|
|
}
|
|
fwnode = of_fwnode_handle(endpoint);
|
|
rval = fwnode_property_read_u32_array(fwnode, "data-lanes", NULL, 0);
|
|
of_node_put(endpoint);
|
|
if (rval <= 0) {
|
|
dev_warn(dev, " Get mipi lane num failed!\n");
|
|
return -1;
|
|
}
|
|
|
|
gc02m2->lane_num = rval;
|
|
if (1 == gc02m2->lane_num) {
|
|
gc02m2->cur_mode = &supported_modes[0];
|
|
/* pixel rate = link frequency * 2 * lanes / BITS_PER_SAMPLE */
|
|
gc02m2->pixel_rate = GC02M2_MIPI_LINK_FREQ * 2U * gc02m2->lane_num / 10U;
|
|
dev_info(dev, "lane_num(%d) pixel_rate(%u)\n",
|
|
gc02m2->lane_num, gc02m2->pixel_rate);
|
|
} else {
|
|
dev_err(dev, "unsupported lane_num(%d)\n", gc02m2->lane_num);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int gc02m2_initialize_controls(struct gc02m2 *gc02m2)
|
|
{
|
|
const struct gc02m2_mode *mode;
|
|
struct v4l2_ctrl_handler *handler;
|
|
struct v4l2_ctrl *ctrl;
|
|
s64 exposure_max, vblank_def;
|
|
u32 h_blank;
|
|
int ret;
|
|
struct device *dev = &gc02m2->client->dev;
|
|
|
|
dev_info(dev, "Enter %s(%d) !\n", __func__, __LINE__);
|
|
handler = &gc02m2->ctrl_handler;
|
|
mode = gc02m2->cur_mode;
|
|
ret = v4l2_ctrl_handler_init(handler, 8);
|
|
if (ret)
|
|
return ret;
|
|
handler->lock = &gc02m2->mutex;
|
|
|
|
ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ,
|
|
0, 0, link_freq_menu_items);
|
|
if (ctrl)
|
|
ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE,
|
|
0, GC02M2_PIXEL_RATE, 1, GC02M2_PIXEL_RATE);
|
|
|
|
h_blank = mode->hts_def - mode->width;
|
|
gc02m2->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
|
|
h_blank, h_blank, 1, h_blank);
|
|
if (gc02m2->hblank)
|
|
gc02m2->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
vblank_def = mode->vts_def - mode->height;
|
|
gc02m2->vblank = v4l2_ctrl_new_std(handler, &gc02m2_ctrl_ops,
|
|
V4L2_CID_VBLANK, vblank_def,
|
|
GC02M2_VTS_MAX - mode->height,
|
|
1, vblank_def);
|
|
|
|
exposure_max = mode->vts_def - 16;
|
|
gc02m2->exposure = v4l2_ctrl_new_std(handler, &gc02m2_ctrl_ops,
|
|
V4L2_CID_EXPOSURE, GC02M2_EXPOSURE_MIN,
|
|
exposure_max, GC02M2_EXPOSURE_STEP,
|
|
mode->exp_def);
|
|
|
|
gc02m2->anal_gain = v4l2_ctrl_new_std(handler, &gc02m2_ctrl_ops,
|
|
V4L2_CID_ANALOGUE_GAIN, GC02M2_GAIN_MIN,
|
|
GC02M2_GAIN_MAX, GC02M2_GAIN_STEP,
|
|
GC02M2_GAIN_DEFAULT);
|
|
|
|
v4l2_ctrl_new_std(handler, &gc02m2_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
|
|
v4l2_ctrl_new_std(handler, &gc02m2_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
|
|
if (handler->error) {
|
|
ret = handler->error;
|
|
dev_err(&gc02m2->client->dev,
|
|
"Failed to init controls(%d)\n", ret);
|
|
goto err_free_handler;
|
|
}
|
|
|
|
gc02m2->subdev.ctrl_handler = handler;
|
|
|
|
return 0;
|
|
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(handler);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct gc02m2 *gc02m2;
|
|
struct v4l2_subdev *sd;
|
|
char facing[2];
|
|
int ret;
|
|
|
|
dev_info(dev, "driver version: %02x.%02x.%02x",
|
|
DRIVER_VERSION >> 16,
|
|
(DRIVER_VERSION & 0xff00) >> 8,
|
|
DRIVER_VERSION & 0x00ff);
|
|
|
|
gc02m2 = devm_kzalloc(dev, sizeof(*gc02m2), GFP_KERNEL);
|
|
if (!gc02m2)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32(node, RKMODULE_CAMERA_MODULE_INDEX,
|
|
&gc02m2->module_index);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_FACING,
|
|
&gc02m2->module_facing);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_NAME,
|
|
&gc02m2->module_name);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_LENS_NAME,
|
|
&gc02m2->len_name);
|
|
if (ret) {
|
|
dev_err(dev, "could not get module information!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gc02m2->client = client;
|
|
gc02m2->cur_mode = &supported_modes[0];
|
|
|
|
gc02m2->xvclk = devm_clk_get(dev, "xvclk");
|
|
if (IS_ERR(gc02m2->xvclk)) {
|
|
dev_err(dev, "Failed to get xvclk\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gc02m2->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(gc02m2->reset_gpio))
|
|
dev_warn(dev, "Failed to get reset-gpios\n");
|
|
|
|
gc02m2->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(gc02m2->pwdn_gpio))
|
|
dev_warn(dev, "Failed to get pwdn-gpios\n");
|
|
|
|
ret = gc02m2_parse_of(gc02m2);
|
|
if (ret != 0)
|
|
return -EINVAL;
|
|
|
|
gc02m2->pinctrl = devm_pinctrl_get(dev);
|
|
if (!IS_ERR(gc02m2->pinctrl)) {
|
|
gc02m2->pins_default =
|
|
pinctrl_lookup_state(gc02m2->pinctrl,
|
|
OF_CAMERA_PINCTRL_STATE_DEFAULT);
|
|
if (IS_ERR(gc02m2->pins_default))
|
|
dev_err(dev, "could not get default pinstate\n");
|
|
|
|
gc02m2->pins_sleep =
|
|
pinctrl_lookup_state(gc02m2->pinctrl,
|
|
OF_CAMERA_PINCTRL_STATE_SLEEP);
|
|
if (IS_ERR(gc02m2->pins_sleep))
|
|
dev_err(dev, "could not get sleep pinstate\n");
|
|
} else {
|
|
dev_err(dev, "no pinctrl\n");
|
|
}
|
|
|
|
ret = gc02m2_configure_regulators(gc02m2);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get power regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
mutex_init(&gc02m2->mutex);
|
|
|
|
sd = &gc02m2->subdev;
|
|
v4l2_i2c_subdev_init(sd, client, &gc02m2_subdev_ops);
|
|
ret = gc02m2_initialize_controls(gc02m2);
|
|
if (ret)
|
|
goto err_destroy_mutex;
|
|
|
|
ret = __gc02m2_power_on(gc02m2);
|
|
if (ret)
|
|
goto err_free_handler;
|
|
|
|
ret = gc02m2_check_sensor_id(gc02m2, client);
|
|
if (ret)
|
|
goto err_power_off;
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
sd->internal_ops = &gc02m2_internal_ops;
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
#endif
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
gc02m2->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
ret = media_entity_pads_init(&sd->entity, 1, &gc02m2->pad);
|
|
if (ret < 0)
|
|
goto err_power_off;
|
|
#endif
|
|
|
|
memset(facing, 0, sizeof(facing));
|
|
if (strcmp(gc02m2->module_facing, "back") == 0)
|
|
facing[0] = 'b';
|
|
else
|
|
facing[0] = 'f';
|
|
|
|
snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",
|
|
gc02m2->module_index, facing,
|
|
GC02M2_NAME, dev_name(sd->dev));
|
|
ret = v4l2_async_register_subdev_sensor_common(sd);
|
|
if (ret) {
|
|
dev_err(dev, "v4l2 async register subdev failed\n");
|
|
goto err_clean_entity;
|
|
}
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_idle(dev);
|
|
|
|
return 0;
|
|
|
|
err_clean_entity:
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
err_power_off:
|
|
__gc02m2_power_off(gc02m2);
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(&gc02m2->ctrl_handler);
|
|
err_destroy_mutex:
|
|
mutex_destroy(&gc02m2->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc02m2_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct gc02m2 *gc02m2 = to_gc02m2(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
v4l2_ctrl_handler_free(&gc02m2->ctrl_handler);
|
|
mutex_destroy(&gc02m2->mutex);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
if (!pm_runtime_status_suspended(&client->dev))
|
|
__gc02m2_power_off(gc02m2);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id gc02m2_of_match[] = {
|
|
{ .compatible = "galaxycore,gc02m2" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gc02m2_of_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id gc02m2_match_id[] = {
|
|
{ "galaxycore,gc02m2", 0 },
|
|
{ },
|
|
};
|
|
|
|
static struct i2c_driver gc02m2_i2c_driver = {
|
|
.driver = {
|
|
.name = GC02M2_NAME,
|
|
.pm = &gc02m2_pm_ops,
|
|
.of_match_table = of_match_ptr(gc02m2_of_match),
|
|
},
|
|
.probe = &gc02m2_probe,
|
|
.remove = &gc02m2_remove,
|
|
.id_table = gc02m2_match_id,
|
|
};
|
|
|
|
static int __init sensor_mod_init(void)
|
|
{
|
|
return i2c_add_driver(&gc02m2_i2c_driver);
|
|
}
|
|
|
|
static void __exit sensor_mod_exit(void)
|
|
{
|
|
i2c_del_driver(&gc02m2_i2c_driver);
|
|
}
|
|
|
|
device_initcall_sync(sensor_mod_init);
|
|
module_exit(sensor_mod_exit);
|
|
|
|
MODULE_DESCRIPTION("GalaxyCore gc02m2 sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|