851 lines
		
	
	
		
			23 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			851 lines
		
	
	
		
			23 KiB
		
	
	
	
		
			C
		
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
 | |
|  *
 | |
|  * epn.c - Generic endpoints management
 | |
|  *
 | |
|  * Copyright 2017 IBM Corporation
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/list.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/proc_fs.h>
 | |
| #include <linux/prefetch.h>
 | |
| #include <linux/clk.h>
 | |
| #include <linux/usb/gadget.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/of_gpio.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/dma-mapping.h>
 | |
| 
 | |
| #include "vhub.h"
 | |
| 
 | |
| #define EXTRA_CHECKS
 | |
| 
 | |
| #ifdef EXTRA_CHECKS
 | |
| #define CHECK(ep, expr, fmt...)					\
 | |
| 	do {							\
 | |
| 		if (!(expr)) EPDBG(ep, "CHECK:" fmt);		\
 | |
| 	} while(0)
 | |
| #else
 | |
| #define CHECK(ep, expr, fmt...)	do { } while(0)
 | |
| #endif
 | |
| 
 | |
| static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req)
 | |
| {
 | |
| 	unsigned int act = req->req.actual;
 | |
| 	unsigned int len = req->req.length;
 | |
| 	unsigned int chunk;
 | |
| 
 | |
| 	/* There should be no DMA ongoing */
 | |
| 	WARN_ON(req->active);
 | |
| 
 | |
| 	/* Calculate next chunk size */
 | |
| 	chunk = len - act;
 | |
| 	if (chunk > ep->ep.maxpacket)
 | |
| 		chunk = ep->ep.maxpacket;
 | |
| 	else if ((chunk < ep->ep.maxpacket) || !req->req.zero)
 | |
| 		req->last_desc = 1;
 | |
| 
 | |
| 	EPVDBG(ep, "kick req %p act=%d/%d chunk=%d last=%d\n",
 | |
| 	       req, act, len, chunk, req->last_desc);
 | |
| 
 | |
| 	/* If DMA unavailable, using staging EP buffer */
 | |
| 	if (!req->req.dma) {
 | |
| 
 | |
| 		/* For IN transfers, copy data over first */
 | |
| 		if (ep->epn.is_in) {
 | |
| 			memcpy(ep->buf, req->req.buf + act, chunk);
 | |
| 			vhub_dma_workaround(ep->buf);
 | |
| 		}
 | |
| 		writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE);
 | |
| 	} else {
 | |
| 		if (ep->epn.is_in)
 | |
| 			vhub_dma_workaround(req->req.buf);
 | |
| 		writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE);
 | |
| 	}
 | |
| 
 | |
| 	/* Start DMA */
 | |
| 	req->active = true;
 | |
| 	writel(VHUB_EP_DMA_SET_TX_SIZE(chunk),
 | |
| 	       ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 	writel(VHUB_EP_DMA_SET_TX_SIZE(chunk) | VHUB_EP_DMA_SINGLE_KICK,
 | |
| 	       ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| }
 | |
| 
 | |
| static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep)
 | |
| {
 | |
| 	struct ast_vhub_req *req;
 | |
| 	unsigned int len;
 | |
| 	u32 stat;
 | |
| 
 | |
| 	/* Read EP status */
 | |
| 	stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 
 | |
| 	/* Grab current request if any */
 | |
| 	req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue);
 | |
| 
 | |
| 	EPVDBG(ep, "ACK status=%08x is_in=%d, req=%p (active=%d)\n",
 | |
| 	       stat, ep->epn.is_in, req, req ? req->active : 0);
 | |
| 
 | |
| 	/* In absence of a request, bail out, must have been dequeued */
 | |
| 	if (!req)
 | |
| 		return;
 | |
| 
 | |
| 	/*
 | |
| 	 * Request not active, move on to processing queue, active request
 | |
| 	 * was probably dequeued
 | |
| 	 */
 | |
| 	if (!req->active)
 | |
| 		goto next_chunk;
 | |
| 
 | |
| 	/* Check if HW has moved on */
 | |
| 	if (VHUB_EP_DMA_RPTR(stat) != 0) {
 | |
| 		EPDBG(ep, "DMA read pointer not 0 !\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* No current DMA ongoing */
 | |
| 	req->active = false;
 | |
| 
 | |
| 	/* Grab length out of HW */
 | |
| 	len = VHUB_EP_DMA_TX_SIZE(stat);
 | |
| 
 | |
| 	/* If not using DMA, copy data out if needed */
 | |
| 	if (!req->req.dma && !ep->epn.is_in && len)
 | |
| 		memcpy(req->req.buf + req->req.actual, ep->buf, len);
 | |
| 
 | |
| 	/* Adjust size */
 | |
| 	req->req.actual += len;
 | |
| 
 | |
| 	/* Check for short packet */
 | |
| 	if (len < ep->ep.maxpacket)
 | |
| 		req->last_desc = 1;
 | |
| 
 | |
| 	/* That's it ? complete the request and pick a new one */
 | |
| 	if (req->last_desc >= 0) {
 | |
| 		ast_vhub_done(ep, req, 0);
 | |
| 		req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req,
 | |
| 					       queue);
 | |
| 
 | |
| 		/*
 | |
| 		 * Due to lock dropping inside "done" the next request could
 | |
| 		 * already be active, so check for that and bail if needed.
 | |
| 		 */
 | |
| 		if (!req || req->active)
 | |
| 			return;
 | |
| 	}
 | |
| 
 | |
|  next_chunk:
 | |
| 	ast_vhub_epn_kick(ep, req);
 | |
| }
 | |
| 
 | |
| static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep)
 | |
| {
 | |
| 	/*
 | |
| 	 * d_next == d_last means descriptor list empty to HW,
 | |
| 	 * thus we can only have AST_VHUB_DESCS_COUNT-1 descriptors
 | |
| 	 * in the list
 | |
| 	 */
 | |
| 	return (ep->epn.d_last + AST_VHUB_DESCS_COUNT - ep->epn.d_next - 1) &
 | |
| 		(AST_VHUB_DESCS_COUNT - 1);
 | |
| }
 | |
| 
 | |
| static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep,
 | |
| 				   struct ast_vhub_req *req)
 | |
| {
 | |
| 	struct ast_vhub_desc *desc = NULL;
 | |
| 	unsigned int act = req->act_count;
 | |
| 	unsigned int len = req->req.length;
 | |
| 	unsigned int chunk;
 | |
| 
 | |
| 	/* Mark request active if not already */
 | |
| 	req->active = true;
 | |
| 
 | |
| 	/* If the request was already completely written, do nothing */
 | |
| 	if (req->last_desc >= 0)
 | |
| 		return;
 | |
| 
 | |
| 	EPVDBG(ep, "kick act=%d/%d chunk_max=%d free_descs=%d\n",
 | |
| 	       act, len, ep->epn.chunk_max, ast_vhub_count_free_descs(ep));
 | |
| 
 | |
| 	/* While we can create descriptors */
 | |
| 	while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) {
 | |
| 		unsigned int d_num;
 | |
| 
 | |
| 		/* Grab next free descriptor */
 | |
| 		d_num = ep->epn.d_next;
 | |
| 		desc = &ep->epn.descs[d_num];
 | |
| 		ep->epn.d_next = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1);
 | |
| 
 | |
| 		/* Calculate next chunk size */
 | |
| 		chunk = len - act;
 | |
| 		if (chunk <= ep->epn.chunk_max) {
 | |
| 			/*
 | |
| 			 * Is this the last packet ? Because of having up to 8
 | |
| 			 * packets in a descriptor we can't just compare "chunk"
 | |
| 			 * with ep.maxpacket. We have to see if it's a multiple
 | |
| 			 * of it to know if we have to send a zero packet.
 | |
| 			 * Sadly that involves a modulo which is a bit expensive
 | |
| 			 * but probably still better than not doing it.
 | |
| 			 */
 | |
| 			if (!chunk || !req->req.zero || (chunk % ep->ep.maxpacket) != 0)
 | |
| 				req->last_desc = d_num;
 | |
| 		} else {
 | |
| 			chunk = ep->epn.chunk_max;
 | |
| 		}
 | |
| 
 | |
| 		EPVDBG(ep, " chunk: act=%d/%d chunk=%d last=%d desc=%d free=%d\n",
 | |
| 		       act, len, chunk, req->last_desc, d_num,
 | |
| 		       ast_vhub_count_free_descs(ep));
 | |
| 
 | |
| 		/* Populate descriptor */
 | |
| 		desc->w0 = cpu_to_le32(req->req.dma + act);
 | |
| 
 | |
| 		/* Interrupt if end of request or no more descriptors */
 | |
| 
 | |
| 		/*
 | |
| 		 * TODO: Be smarter about it, if we don't have enough
 | |
| 		 * descriptors request an interrupt before queue empty
 | |
| 		 * or so in order to be able to populate more before
 | |
| 		 * the HW runs out. This isn't a problem at the moment
 | |
| 		 * as we use 256 descriptors and only put at most one
 | |
| 		 * request in the ring.
 | |
| 		 */
 | |
| 		desc->w1 = cpu_to_le32(VHUB_DSC1_IN_SET_LEN(chunk));
 | |
| 		if (req->last_desc >= 0 || !ast_vhub_count_free_descs(ep))
 | |
| 			desc->w1 |= cpu_to_le32(VHUB_DSC1_IN_INTERRUPT);
 | |
| 
 | |
| 		/* Account packet */
 | |
| 		req->act_count = act = act + chunk;
 | |
| 	}
 | |
| 
 | |
| 	if (likely(desc))
 | |
| 		vhub_dma_workaround(desc);
 | |
| 
 | |
| 	/* Tell HW about new descriptors */
 | |
| 	writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next),
 | |
| 	       ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 
 | |
| 	EPVDBG(ep, "HW kicked, d_next=%d dstat=%08x\n",
 | |
| 	       ep->epn.d_next, readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS));
 | |
| }
 | |
| 
 | |
| static void ast_vhub_epn_handle_ack_desc(struct ast_vhub_ep *ep)
 | |
| {
 | |
| 	struct ast_vhub_req *req;
 | |
| 	unsigned int len, d_last;
 | |
| 	u32 stat, stat1;
 | |
| 
 | |
| 	/* Read EP status, workaround HW race */
 | |
| 	do {
 | |
| 		stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 		stat1 = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 	} while(stat != stat1);
 | |
| 
 | |
| 	/* Extract RPTR */
 | |
| 	d_last = VHUB_EP_DMA_RPTR(stat);
 | |
| 
 | |
| 	/* Grab current request if any */
 | |
| 	req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue);
 | |
| 
 | |
| 	EPVDBG(ep, "ACK status=%08x is_in=%d ep->d_last=%d..%d\n",
 | |
| 	       stat, ep->epn.is_in, ep->epn.d_last, d_last);
 | |
| 
 | |
| 	/* Check all completed descriptors */
 | |
| 	while (ep->epn.d_last != d_last) {
 | |
| 		struct ast_vhub_desc *desc;
 | |
| 		unsigned int d_num;
 | |
| 		bool is_last_desc;
 | |
| 
 | |
| 		/* Grab next completed descriptor */
 | |
| 		d_num = ep->epn.d_last;
 | |
| 		desc = &ep->epn.descs[d_num];
 | |
| 		ep->epn.d_last = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1);
 | |
| 
 | |
| 		/* Grab len out of descriptor */
 | |
| 		len = VHUB_DSC1_IN_LEN(le32_to_cpu(desc->w1));
 | |
| 
 | |
| 		EPVDBG(ep, " desc %d len=%d req=%p (act=%d)\n",
 | |
| 		       d_num, len, req, req ? req->active : 0);
 | |
| 
 | |
| 		/* If no active request pending, move on */
 | |
| 		if (!req || !req->active)
 | |
| 			continue;
 | |
| 
 | |
| 		/* Adjust size */
 | |
| 		req->req.actual += len;
 | |
| 
 | |
| 		/* Is that the last chunk ? */
 | |
| 		is_last_desc = req->last_desc == d_num;
 | |
| 		CHECK(ep, is_last_desc == (len < ep->ep.maxpacket ||
 | |
| 					   (req->req.actual >= req->req.length &&
 | |
| 					    !req->req.zero)),
 | |
| 		      "Last packet discrepancy: last_desc=%d len=%d r.act=%d "
 | |
| 		      "r.len=%d r.zero=%d mp=%d\n",
 | |
| 		      is_last_desc, len, req->req.actual, req->req.length,
 | |
| 		      req->req.zero, ep->ep.maxpacket);
 | |
| 
 | |
| 		if (is_last_desc) {
 | |
| 			/*
 | |
| 			 * Because we can only have one request at a time
 | |
| 			 * in our descriptor list in this implementation,
 | |
| 			 * d_last and ep->d_last should now be equal
 | |
| 			 */
 | |
| 			CHECK(ep, d_last == ep->epn.d_last,
 | |
| 			      "DMA read ptr mismatch %d vs %d\n",
 | |
| 			      d_last, ep->epn.d_last);
 | |
| 
 | |
| 			/* Note: done will drop and re-acquire the lock */
 | |
| 			ast_vhub_done(ep, req, 0);
 | |
| 			req = list_first_entry_or_null(&ep->queue,
 | |
| 						       struct ast_vhub_req,
 | |
| 						       queue);
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* More work ? */
 | |
| 	if (req)
 | |
| 		ast_vhub_epn_kick_desc(ep, req);
 | |
| }
 | |
| 
 | |
| void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep)
 | |
| {
 | |
| 	if (ep->epn.desc_mode)
 | |
| 		ast_vhub_epn_handle_ack_desc(ep);
 | |
| 	else
 | |
| 		ast_vhub_epn_handle_ack(ep);
 | |
| }
 | |
| 
 | |
| static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 | |
| 			      gfp_t gfp_flags)
 | |
| {
 | |
| 	struct ast_vhub_req *req = to_ast_req(u_req);
 | |
| 	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
 | |
| 	struct ast_vhub *vhub = ep->vhub;
 | |
| 	unsigned long flags;
 | |
| 	bool empty;
 | |
| 	int rc;
 | |
| 
 | |
| 	/* Paranoid checks */
 | |
| 	if (!u_req || !u_req->complete || !u_req->buf) {
 | |
| 		dev_warn(&vhub->pdev->dev, "Bogus EPn request ! u_req=%p\n", u_req);
 | |
| 		if (u_req) {
 | |
| 			dev_warn(&vhub->pdev->dev, "complete=%p internal=%d\n",
 | |
| 				 u_req->complete, req->internal);
 | |
| 		}
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* Endpoint enabled ? */
 | |
| 	if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx ||
 | |
| 	    !ep->dev->enabled) {
 | |
| 		EPDBG(ep, "Enqueuing request on wrong or disabled EP\n");
 | |
| 		return -ESHUTDOWN;
 | |
| 	}
 | |
| 
 | |
| 	/* Map request for DMA if possible. For now, the rule for DMA is
 | |
| 	 * that:
 | |
| 	 *
 | |
| 	 *  * For single stage mode (no descriptors):
 | |
| 	 *
 | |
| 	 *   - The buffer is aligned to a 8 bytes boundary (HW requirement)
 | |
| 	 *   - For a OUT endpoint, the request size is a multiple of the EP
 | |
| 	 *     packet size (otherwise the controller will DMA past the end
 | |
| 	 *     of the buffer if the host is sending a too long packet).
 | |
| 	 *
 | |
| 	 *  * For descriptor mode (tx only for now), always.
 | |
| 	 *
 | |
| 	 * We could relax the latter by making the decision to use the bounce
 | |
| 	 * buffer based on the size of a given *segment* of the request rather
 | |
| 	 * than the whole request.
 | |
| 	 */
 | |
| 	if (ep->epn.desc_mode ||
 | |
| 	    ((((unsigned long)u_req->buf & 7) == 0) &&
 | |
| 	     (ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) {
 | |
| 		rc = usb_gadget_map_request_by_dev(&vhub->pdev->dev, u_req,
 | |
| 					    ep->epn.is_in);
 | |
| 		if (rc) {
 | |
| 			dev_warn(&vhub->pdev->dev,
 | |
| 				 "Request mapping failure %d\n", rc);
 | |
| 			return rc;
 | |
| 		}
 | |
| 	} else
 | |
| 		u_req->dma = 0;
 | |
| 
 | |
| 	EPVDBG(ep, "enqueue req @%p\n", req);
 | |
| 	EPVDBG(ep, " l=%d dma=0x%x zero=%d noshort=%d noirq=%d is_in=%d\n",
 | |
| 	       u_req->length, (u32)u_req->dma, u_req->zero,
 | |
| 	       u_req->short_not_ok, u_req->no_interrupt,
 | |
| 	       ep->epn.is_in);
 | |
| 
 | |
| 	/* Initialize request progress fields */
 | |
| 	u_req->status = -EINPROGRESS;
 | |
| 	u_req->actual = 0;
 | |
| 	req->act_count = 0;
 | |
| 	req->active = false;
 | |
| 	req->last_desc = -1;
 | |
| 	spin_lock_irqsave(&vhub->lock, flags);
 | |
| 	empty = list_empty(&ep->queue);
 | |
| 
 | |
| 	/* Add request to list and kick processing if empty */
 | |
| 	list_add_tail(&req->queue, &ep->queue);
 | |
| 	if (empty) {
 | |
| 		if (ep->epn.desc_mode)
 | |
| 			ast_vhub_epn_kick_desc(ep, req);
 | |
| 		else
 | |
| 			ast_vhub_epn_kick(ep, req);
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep,
 | |
| 				     bool restart_ep)
 | |
| {
 | |
| 	u32 state, reg, loops;
 | |
| 
 | |
| 	/* Stop DMA activity */
 | |
| 	if (ep->epn.desc_mode)
 | |
| 		writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 	else
 | |
| 		writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 
 | |
| 	/* Wait for it to complete */
 | |
| 	for (loops = 0; loops < 1000; loops++) {
 | |
| 		state = readl(ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 		state = VHUB_EP_DMA_PROC_STATUS(state);
 | |
| 		if (state == EP_DMA_PROC_RX_IDLE ||
 | |
| 		    state == EP_DMA_PROC_TX_IDLE)
 | |
| 			break;
 | |
| 		udelay(1);
 | |
| 	}
 | |
| 	if (loops >= 1000)
 | |
| 		dev_warn(&ep->vhub->pdev->dev, "Timeout waiting for DMA\n");
 | |
| 
 | |
| 	/* If we don't have to restart the endpoint, that's it */
 | |
| 	if (!restart_ep)
 | |
| 		return;
 | |
| 
 | |
| 	/* Restart the endpoint */
 | |
| 	if (ep->epn.desc_mode) {
 | |
| 		/*
 | |
| 		 * Take out descriptors by resetting the DMA read
 | |
| 		 * pointer to be equal to the CPU write pointer.
 | |
| 		 *
 | |
| 		 * Note: If we ever support creating descriptors for
 | |
| 		 * requests that aren't the head of the queue, we
 | |
| 		 * may have to do something more complex here,
 | |
| 		 * especially if the request being taken out is
 | |
| 		 * not the current head descriptors.
 | |
| 		 */
 | |
| 		reg = VHUB_EP_DMA_SET_RPTR(ep->epn.d_next) |
 | |
| 			VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next);
 | |
| 		writel(reg, ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 
 | |
| 		/* Then turn it back on */
 | |
| 		writel(ep->epn.dma_conf,
 | |
| 		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 	} else {
 | |
| 		/* Single mode: just turn it back on */
 | |
| 		writel(ep->epn.dma_conf,
 | |
| 		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int ast_vhub_epn_dequeue(struct usb_ep* u_ep, struct usb_request *u_req)
 | |
| {
 | |
| 	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
 | |
| 	struct ast_vhub *vhub = ep->vhub;
 | |
| 	struct ast_vhub_req *req;
 | |
| 	unsigned long flags;
 | |
| 	int rc = -EINVAL;
 | |
| 
 | |
| 	spin_lock_irqsave(&vhub->lock, flags);
 | |
| 
 | |
| 	/* Make sure it's actually queued on this endpoint */
 | |
| 	list_for_each_entry (req, &ep->queue, queue) {
 | |
| 		if (&req->req == u_req)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	if (&req->req == u_req) {
 | |
| 		EPVDBG(ep, "dequeue req @%p active=%d\n",
 | |
| 		       req, req->active);
 | |
| 		if (req->active)
 | |
| 			ast_vhub_stop_active_req(ep, true);
 | |
| 		ast_vhub_done(ep, req, -ECONNRESET);
 | |
| 		rc = 0;
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep)
 | |
| {
 | |
| 	u32 reg;
 | |
| 
 | |
| 	if (WARN_ON(ep->d_idx == 0))
 | |
| 		return;
 | |
| 	reg = readl(ep->epn.regs + AST_VHUB_EP_CONFIG);
 | |
| 	if (ep->epn.stalled || ep->epn.wedged)
 | |
| 		reg |= VHUB_EP_CFG_STALL_CTRL;
 | |
| 	else
 | |
| 		reg &= ~VHUB_EP_CFG_STALL_CTRL;
 | |
| 	writel(reg, ep->epn.regs + AST_VHUB_EP_CONFIG);
 | |
| 
 | |
| 	if (!ep->epn.stalled && !ep->epn.wedged)
 | |
| 		writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx),
 | |
| 		       ep->vhub->regs + AST_VHUB_EP_TOGGLE);
 | |
| }
 | |
| 
 | |
| static int ast_vhub_set_halt_and_wedge(struct usb_ep* u_ep, bool halt,
 | |
| 				      bool wedge)
 | |
| {
 | |
| 	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
 | |
| 	struct ast_vhub *vhub = ep->vhub;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	EPDBG(ep, "Set halt (%d) & wedge (%d)\n", halt, wedge);
 | |
| 
 | |
| 	if (!u_ep || !u_ep->desc)
 | |
| 		return -EINVAL;
 | |
| 	if (ep->d_idx == 0)
 | |
| 		return 0;
 | |
| 	if (ep->epn.is_iso)
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	spin_lock_irqsave(&vhub->lock, flags);
 | |
| 
 | |
| 	/* Fail with still-busy IN endpoints */
 | |
| 	if (halt && ep->epn.is_in && !list_empty(&ep->queue)) {
 | |
| 		spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 		return -EAGAIN;
 | |
| 	}
 | |
| 	ep->epn.stalled = halt;
 | |
| 	ep->epn.wedged = wedge;
 | |
| 	ast_vhub_update_epn_stall(ep);
 | |
| 
 | |
| 	spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ast_vhub_epn_set_halt(struct usb_ep *u_ep, int value)
 | |
| {
 | |
| 	return ast_vhub_set_halt_and_wedge(u_ep, value != 0, false);
 | |
| }
 | |
| 
 | |
| static int ast_vhub_epn_set_wedge(struct usb_ep *u_ep)
 | |
| {
 | |
| 	return ast_vhub_set_halt_and_wedge(u_ep, true, true);
 | |
| }
 | |
| 
 | |
| static int ast_vhub_epn_disable(struct usb_ep* u_ep)
 | |
| {
 | |
| 	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
 | |
| 	struct ast_vhub *vhub = ep->vhub;
 | |
| 	unsigned long flags;
 | |
| 	u32 imask, ep_ier;
 | |
| 
 | |
| 	EPDBG(ep, "Disabling !\n");
 | |
| 
 | |
| 	spin_lock_irqsave(&vhub->lock, flags);
 | |
| 
 | |
| 	ep->epn.enabled = false;
 | |
| 
 | |
| 	/* Stop active DMA if any */
 | |
| 	ast_vhub_stop_active_req(ep, false);
 | |
| 
 | |
| 	/* Disable endpoint */
 | |
| 	writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG);
 | |
| 
 | |
| 	/* Disable ACK interrupt */
 | |
| 	imask = VHUB_EP_IRQ(ep->epn.g_idx);
 | |
| 	ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER);
 | |
| 	ep_ier &= ~imask;
 | |
| 	writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER);
 | |
| 	writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR);
 | |
| 
 | |
| 	/* Nuke all pending requests */
 | |
| 	ast_vhub_nuke(ep, -ESHUTDOWN);
 | |
| 
 | |
| 	/* No more descriptor associated with request */
 | |
| 	ep->ep.desc = NULL;
 | |
| 
 | |
| 	spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ast_vhub_epn_enable(struct usb_ep* u_ep,
 | |
| 			       const struct usb_endpoint_descriptor *desc)
 | |
| {
 | |
| 	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
 | |
| 	struct ast_vhub_dev *dev;
 | |
| 	struct ast_vhub *vhub;
 | |
| 	u16 maxpacket, type;
 | |
| 	unsigned long flags;
 | |
| 	u32 ep_conf, ep_ier, imask;
 | |
| 
 | |
| 	/* Check arguments */
 | |
| 	if (!u_ep || !desc)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	maxpacket = usb_endpoint_maxp(desc);
 | |
| 	if (!ep->d_idx || !ep->dev ||
 | |
| 	    desc->bDescriptorType != USB_DT_ENDPOINT ||
 | |
| 	    maxpacket == 0 || maxpacket > ep->ep.maxpacket) {
 | |
| 		EPDBG(ep, "Invalid EP enable,d_idx=%d,dev=%p,type=%d,mp=%d/%d\n",
 | |
| 		      ep->d_idx, ep->dev, desc->bDescriptorType,
 | |
| 		      maxpacket, ep->ep.maxpacket);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	if (ep->d_idx != usb_endpoint_num(desc)) {
 | |
| 		EPDBG(ep, "EP number mismatch !\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (ep->epn.enabled) {
 | |
| 		EPDBG(ep, "Already enabled\n");
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 	dev = ep->dev;
 | |
| 	vhub = ep->vhub;
 | |
| 
 | |
| 	/* Check device state */
 | |
| 	if (!dev->driver) {
 | |
| 		EPDBG(ep, "Bogus device state: driver=%p speed=%d\n",
 | |
| 		       dev->driver, dev->gadget.speed);
 | |
| 		return -ESHUTDOWN;
 | |
| 	}
 | |
| 
 | |
| 	/* Grab some info from the descriptor */
 | |
| 	ep->epn.is_in = usb_endpoint_dir_in(desc);
 | |
| 	ep->ep.maxpacket = maxpacket;
 | |
| 	type = usb_endpoint_type(desc);
 | |
| 	ep->epn.d_next = ep->epn.d_last = 0;
 | |
| 	ep->epn.is_iso = false;
 | |
| 	ep->epn.stalled = false;
 | |
| 	ep->epn.wedged = false;
 | |
| 
 | |
| 	EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n",
 | |
| 	      ep->epn.is_in ? "in" : "out", usb_ep_type_string(type),
 | |
| 	      usb_endpoint_num(desc), maxpacket);
 | |
| 
 | |
| 	/* Can we use DMA descriptor mode ? */
 | |
| 	ep->epn.desc_mode = ep->epn.descs && ep->epn.is_in;
 | |
| 	if (ep->epn.desc_mode)
 | |
| 		memset(ep->epn.descs, 0, 8 * AST_VHUB_DESCS_COUNT);
 | |
| 
 | |
| 	/*
 | |
| 	 * Large send function can send up to 8 packets from
 | |
| 	 * one descriptor with a limit of 4095 bytes.
 | |
| 	 */
 | |
| 	ep->epn.chunk_max = ep->ep.maxpacket;
 | |
| 	if (ep->epn.is_in) {
 | |
| 		ep->epn.chunk_max <<= 3;
 | |
| 		while (ep->epn.chunk_max > 4095)
 | |
| 			ep->epn.chunk_max -= ep->ep.maxpacket;
 | |
| 	}
 | |
| 
 | |
| 	switch(type) {
 | |
| 	case USB_ENDPOINT_XFER_CONTROL:
 | |
| 		EPDBG(ep, "Only one control endpoint\n");
 | |
| 		return -EINVAL;
 | |
| 	case USB_ENDPOINT_XFER_INT:
 | |
| 		ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_INT);
 | |
| 		break;
 | |
| 	case USB_ENDPOINT_XFER_BULK:
 | |
| 		ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_BULK);
 | |
| 		break;
 | |
| 	case USB_ENDPOINT_XFER_ISOC:
 | |
| 		ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_ISO);
 | |
| 		ep->epn.is_iso = true;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* Encode the rest of the EP config register */
 | |
| 	if (maxpacket < 1024)
 | |
| 		ep_conf |= VHUB_EP_CFG_SET_MAX_PKT(maxpacket);
 | |
| 	if (!ep->epn.is_in)
 | |
| 		ep_conf |= VHUB_EP_CFG_DIR_OUT;
 | |
| 	ep_conf |= VHUB_EP_CFG_SET_EP_NUM(usb_endpoint_num(desc));
 | |
| 	ep_conf |= VHUB_EP_CFG_ENABLE;
 | |
| 	ep_conf |= VHUB_EP_CFG_SET_DEV(dev->index + 1);
 | |
| 	EPVDBG(ep, "config=%08x\n", ep_conf);
 | |
| 
 | |
| 	spin_lock_irqsave(&vhub->lock, flags);
 | |
| 
 | |
| 	/* Disable HW and reset DMA */
 | |
| 	writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG);
 | |
| 	writel(VHUB_EP_DMA_CTRL_RESET,
 | |
| 	       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 
 | |
| 	/* Configure and enable */
 | |
| 	writel(ep_conf, ep->epn.regs + AST_VHUB_EP_CONFIG);
 | |
| 
 | |
| 	if (ep->epn.desc_mode) {
 | |
| 		/* Clear DMA status, including the DMA read ptr */
 | |
| 		writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 
 | |
| 		/* Set descriptor base */
 | |
| 		writel(ep->epn.descs_dma,
 | |
| 		       ep->epn.regs + AST_VHUB_EP_DESC_BASE);
 | |
| 
 | |
| 		/* Set base DMA config value */
 | |
| 		ep->epn.dma_conf = VHUB_EP_DMA_DESC_MODE;
 | |
| 		if (ep->epn.is_in)
 | |
| 			ep->epn.dma_conf |= VHUB_EP_DMA_IN_LONG_MODE;
 | |
| 
 | |
| 		/* First reset and disable all operations */
 | |
| 		writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET,
 | |
| 		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 
 | |
| 		/* Enable descriptor mode */
 | |
| 		writel(ep->epn.dma_conf,
 | |
| 		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 	} else {
 | |
| 		/* Set base DMA config value */
 | |
| 		ep->epn.dma_conf = VHUB_EP_DMA_SINGLE_STAGE;
 | |
| 
 | |
| 		/* Reset and switch to single stage mode */
 | |
| 		writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET,
 | |
| 		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 		writel(ep->epn.dma_conf,
 | |
| 		       ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 | |
| 		writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS);
 | |
| 	}
 | |
| 
 | |
| 	/* Cleanup data toggle just in case */
 | |
| 	writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx),
 | |
| 	       vhub->regs + AST_VHUB_EP_TOGGLE);
 | |
| 
 | |
| 	/* Cleanup and enable ACK interrupt */
 | |
| 	imask = VHUB_EP_IRQ(ep->epn.g_idx);
 | |
| 	writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR);
 | |
| 	ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER);
 | |
| 	ep_ier |= imask;
 | |
| 	writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER);
 | |
| 
 | |
| 	/* Woot, we are online ! */
 | |
| 	ep->epn.enabled = true;
 | |
| 
 | |
| 	spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ast_vhub_epn_dispose(struct usb_ep *u_ep)
 | |
| {
 | |
| 	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
 | |
| 
 | |
| 	if (WARN_ON(!ep->dev || !ep->d_idx))
 | |
| 		return;
 | |
| 
 | |
| 	EPDBG(ep, "Releasing endpoint\n");
 | |
| 
 | |
| 	/* Take it out of the EP list */
 | |
| 	list_del_init(&ep->ep.ep_list);
 | |
| 
 | |
| 	/* Mark the address free in the device */
 | |
| 	ep->dev->epns[ep->d_idx - 1] = NULL;
 | |
| 
 | |
| 	/* Free name & DMA buffers */
 | |
| 	kfree(ep->ep.name);
 | |
| 	ep->ep.name = NULL;
 | |
| 	dma_free_coherent(&ep->vhub->pdev->dev,
 | |
| 			  AST_VHUB_EPn_MAX_PACKET +
 | |
| 			  8 * AST_VHUB_DESCS_COUNT,
 | |
| 			  ep->buf, ep->buf_dma);
 | |
| 	ep->buf = NULL;
 | |
| 	ep->epn.descs = NULL;
 | |
| 
 | |
| 	/* Mark free */
 | |
| 	ep->dev = NULL;
 | |
| }
 | |
| 
 | |
| static const struct usb_ep_ops ast_vhub_epn_ops = {
 | |
| 	.enable		= ast_vhub_epn_enable,
 | |
| 	.disable	= ast_vhub_epn_disable,
 | |
| 	.dispose	= ast_vhub_epn_dispose,
 | |
| 	.queue		= ast_vhub_epn_queue,
 | |
| 	.dequeue	= ast_vhub_epn_dequeue,
 | |
| 	.set_halt	= ast_vhub_epn_set_halt,
 | |
| 	.set_wedge	= ast_vhub_epn_set_wedge,
 | |
| 	.alloc_request	= ast_vhub_alloc_request,
 | |
| 	.free_request	= ast_vhub_free_request,
 | |
| };
 | |
| 
 | |
| struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr)
 | |
| {
 | |
| 	struct ast_vhub *vhub = d->vhub;
 | |
| 	struct ast_vhub_ep *ep;
 | |
| 	unsigned long flags;
 | |
| 	int i;
 | |
| 
 | |
| 	/* Find a free one (no device) */
 | |
| 	spin_lock_irqsave(&vhub->lock, flags);
 | |
| 	for (i = 0; i < vhub->max_epns; i++)
 | |
| 		if (vhub->epns[i].dev == NULL)
 | |
| 			break;
 | |
| 	if (i >= vhub->max_epns) {
 | |
| 		spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	/* Set it up */
 | |
| 	ep = &vhub->epns[i];
 | |
| 	ep->dev = d;
 | |
| 	spin_unlock_irqrestore(&vhub->lock, flags);
 | |
| 
 | |
| 	DDBG(d, "Allocating gen EP %d for addr %d\n", i, addr);
 | |
| 	INIT_LIST_HEAD(&ep->queue);
 | |
| 	ep->d_idx = addr;
 | |
| 	ep->vhub = vhub;
 | |
| 	ep->ep.ops = &ast_vhub_epn_ops;
 | |
| 	ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", addr);
 | |
| 	d->epns[addr-1] = ep;
 | |
| 	ep->epn.g_idx = i;
 | |
| 	ep->epn.regs = vhub->regs + 0x200 + (i * 0x10);
 | |
| 
 | |
| 	ep->buf = dma_alloc_coherent(&vhub->pdev->dev,
 | |
| 				     AST_VHUB_EPn_MAX_PACKET +
 | |
| 				     8 * AST_VHUB_DESCS_COUNT,
 | |
| 				     &ep->buf_dma, GFP_KERNEL);
 | |
| 	if (!ep->buf) {
 | |
| 		kfree(ep->ep.name);
 | |
| 		ep->ep.name = NULL;
 | |
| 		return NULL;
 | |
| 	}
 | |
| 	ep->epn.descs = ep->buf + AST_VHUB_EPn_MAX_PACKET;
 | |
| 	ep->epn.descs_dma = ep->buf_dma + AST_VHUB_EPn_MAX_PACKET;
 | |
| 
 | |
| 	usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EPn_MAX_PACKET);
 | |
| 	list_add_tail(&ep->ep.ep_list, &d->gadget.ep_list);
 | |
| 	ep->ep.caps.type_iso = true;
 | |
| 	ep->ep.caps.type_bulk = true;
 | |
| 	ep->ep.caps.type_int = true;
 | |
| 	ep->ep.caps.dir_in = true;
 | |
| 	ep->ep.caps.dir_out = true;
 | |
| 
 | |
| 	return ep;
 | |
| }
 |