14 KiB
14 KiB
RK3588 Release Note
rk3588_bl32_v1.14.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-08-28 | rk3588_bl32_v1.14.bin | b5340fd65 | important |
New
- Pseudo random number seed will be set by default.
- Supports read and write security flag interfaces.
- Support check ta encryption key is written.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fixed hardware crypto probability crash issue after enabling dynamic memory | Error will be reported when using hardware crypto | - |
rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-08-11 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.13.bin | 25cee80c4f | important |
Warn
- BL31 should be update to V1.41 or above.
New
- Improve the stability of LPDDR5 528MHz.
- Update vref_inner for each channel in fsp_param to improve stability.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fixed init fail issue that boot in high temperature environment | Panic in ddrbin when boot in high temperature environment | - |
rk3588_bl31_v1.41.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-08-10 | rk3588_bl31_v1.41.elf | b7c5102a2 | important |
New
- Support L3 partition.
- Update configuration of ddr vref_inner.
- Support to config MCU sleep parameter through DTS.
rk3588_bl31_v1.40.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-07-13 | rk3588_bl31_v1.40.elf | dc1125f48 | important |
New
- Add support to reset vop sub mem pd.
rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-07-06 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.12.bin | 52218f4949 | important |
New
- Add support print training result and mr value.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fixed init fail issue that max freq between 1066-1600MHz | Panic in ddrbin when max DDR freq between 1066-1600MHz. | - |
| 2 | important | Fixed the issue painc in ddrbin caused by multiple initialization of DDR | When the first SPL firmware failed to load, reloading the second firmware would result in repeated initialization of the DDR. This caused a panic in ddrbin. | - |
rk3588_bl31_v1.39.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-06-27 | rk3588_bl31_v1.39.elf | 001b4889e | important |
New
- Change read size to 128 bytes.
- Adjust pvtpll table by otp.
- Modify pvtpll table for rk3588j/m.
rk3588_bl31_v1.38.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-05-09 | rk3588_bl31_v1.38.elf | 3389cfdda | important |
Warn
- DDR bin should be update to V1.11 or above.
New
- Update configuration of ddr lp5 mr.
- Improve the stability of hdmirx.
- Support ddr spread spectrum mode.
rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-05-09 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin | f1474cf52f | important |
Warn
- BL31 should be update to V1.38 or above.
New
- Added more print info when initialization fails to help locate soldering issues.
- Optimizing boot time.
- Enable per bank refresh function.
- LPDDR5 4 channels use different write vref values to improve stability.
- First init LPDDR4x.
- LPDDR5 cavref update to 36%.
- Add support spread spectrum mode.
rk3588_bl32_v1.13.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-04-19 | rk3588_bl32_v1.13.bin | 7f1ea6d6e | important |
New
- OTP supports burst read to accelerate BL32 startup speed.
- Kernel support read secure boot flag and public key hash.
- Support dynamic shared memory, and the secure and normal world can transfer more larger data.
- BL32 supports pstore, and the kernel can view print info of BL32 through pstore node.
rk3588_bl31_v1.37.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-03-08 | rk3588_bl31_v1.37.elf | 9609b9c19 | important |
New
- Save/restore u2phy_grf registers when system suspend/resume.
- Save/restore more ddr related registers when system suspend/resume.
- Compatible with system suspend/resume in QNX.
rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.10.bin | 75d050770f | important |
New
- Pageclose can be enable/disable by ddrbin_tool.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | fix total 24GB bug | If the DDR total capacity is 24GB, it will be stuck and unable to enter kernel. | - |
| 2 | important | fix LP4/LP4X stability issue | Some LP4/LP4X board need to update read odt to 40ohm to fix stability issue. Note: BL31 should be update to V1.37. | - |
| 3 | important | improve LP5 performance | LPDDR5 timing tWTR calculate error lead to slow performance | - |
rk3588_bl31_v1.36.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-01-30 | rk3588_bl31_v1.36.elf | 78ee25fe7 | important |
New
- Supports analyze infrared signals of various protocols during system suspend by software, which needs to be used together with mcu.
rk3588_bl31_v1.35.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-01-16 | rk3588_bl31_v1.35.elf | bd7bac37a | important |
New
- Improve the stability of hdmirx.
rk3588_bl31_v1.34.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2023-01-10 | rk3588_bl31_v1.34.elf | e63a16361 | important |
New
- Support hptimer to use soft adjust mode.
- Support pvtpll to add length.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Avoid pmu mcu to boot accidentally in system suspend. | With pmu mcu's accidental boot, linux kernel's code and data may be overwrite after system resume. | - |
rk3588_spl_v1.12.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-12-26 | rk3588_spl_v1.12.bin | 5f53abfa | important |
New
- Support SPL AB.
rk3588_bl31_v1.33.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-12-07 | rk3588_bl31_v1.33.elf | 17b41886e | important |
New
- Support rk3588m, rk3588j.
rk3588_usbplug_v1.10.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-11-22 | rk3588_usbplug_v1.10.bin | b0e3c43c2 | important |
New
- Improve compatibility.
rk3588_bl31_v1.32.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-11-21 | rk3588_bl31_v1.32.elf | e529a2760 | important |
New
- Support bus auto CS.
rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-11-21 | rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.09.bin | a930779e06 | important |
New
- Derate/perbank refresh can be enable/disable by ddrbin_tool.
- Support pstore function.
- Boot FSP configurable by ddrbin_tool.
- Enable LPDDR5 DMC function.
- Support LPDDR5 byte mode DRAM.
- Recycle 256MB memory(overlap with REG space). This function can be disable by ddrbin_tool.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fix WRTRN Bug | Fix WRTRN bug when ddr freq between 533MHz - 1066MHz | - |
| 2 | important | Fix ZQCALIB bug | Increase auto ZQCALIB command period to 470ms | - |
| 3 | important | Fix 528M bug | 528MHz undo RDTRN, SW*skew should be clean before clean before switch to 528MHz. | - |
| 4 | important | Improve LPDDR5 stability and performance | Fix some LPDDR5 timing like rd2wr,wr2rd and hash config to improve stability and performance. | - |
| 5 | important | LP4/LP4x support 32GB cap | LP4/LP4x support 32GB cap | - |
rk3588_bl31_v1.31.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-11-09 | rk3588_bl31_v1.31.elf | 91e396185 | important |
New
- Enable RK_ENABLE_A76_L2_FLUSH_TO_L3 function.
- Support amp function.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Save/restore some performance setting in system suspend/resume | - | - |
rk3588_bl31_v1.30.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-10-12 | rk3588_bl31_v1.30.elf | 1450d21e8 | important |
New
- Support pstore.
rk3588_bl31_v1.29.elf
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-09-29 | rk3588_bl31_v1.29.elf | 686b5c48b | important |
New
- Add A55 AT speculative patches.
- Add LPDDR5 DFS patches, support DFS between rows.
- Config FW-DSU region according to the specific DDR channel.
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Fix problem about CEC wakeup. | When waiting for CEC wakeup source in system suspend, gpio1/3 irq will wakeup both AP and mcu . | - |
| 2 | important | Fix configuration about ddr. | Fix ddr-unstable problem. | - |
| 3 | important | Fix problem in system suspend if disable uart. | If loader disable uart, system suspend will panic. | - |
rk3588_bl32_v1.12.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-09-20 | rk3588_bl32_v1.12.bin | 4542e1efd | important |
New
- Config FW-DSU region according to the specific DDR channel.
rk3588_bl32_v1.11.bin
| Date | File | Build commit | Severity |
|---|---|---|---|
| 2022-09-15 | rk3588_bl32_v1.11.bin | d84087907 | important |
Fixed
| Index | Severity | Update | Issue description | Issue source |
|---|---|---|---|---|
| 1 | important | Solve the problem that OPTEE is stuck during startup when printing is closed | User use /rkbin/tools/ddrbin_tool to close printing , then rk_atags will notify OPTEE to disable printing, When OPTEE starts, it will be stuck and unable to enter U-Boot | - |